RT0603FRE0718R7L Equivalent & Substitute Parts

Part Overview

The RT0603FRE0718R7L is a 0603 (1608 Metric) thin film chip resistor manufactured by YAGEO, rated at 18.7 Ohms with ±1% tolerance and 0.1W power dissipation. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within the allowed parameter ranges for this resistor category.

Substiute Parts

RT0603FRE0718R7L

YAGEOIn Stock: 841RT0603FRE0718R7L Datasheet

Current PartRFQ

RP73PF1J18R7BTDF

TE Connectivity Passive ProductIn Stock: 2436RP73PF1J18R7BTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0603FRE0718R7L are qualified based on the following criteria:

Electrical Compatibility:

• Resistance value: 18.7 Ohms (exact match required)
• Package / Case: 0603 (1608 Metric) form factor
• Composition: Thin Film construction
• Operating temperature range: -55°C to 155°C minimum
• RoHS3 compliance: Required

Mechanical Compatibility:

• Supplier device package: 0603
• Number of terminations: 2
• Physical dimensions compatible with 0603 footprint

Allowable Parameter Variations:

• Tolerance: May be equal to or tighter than ±1%
• Power rating: May be equal to or greater than 0.1W
• Temperature coefficient: May be equal to or lower (better stability)
• MSL rating: Must be 1 (Unlimited) or equivalent

The RP73PF1J18R7BTDF meets all substitution criteria with improved electrical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the RT0603FRE0718R7L and RP73PF1J18R7BTDF are Active status components with full RoHS3 compliance and unlimited moisture sensitivity ratings. The RP73PF1J18R7BTDF offers enhanced electrical performance with tighter tolerance (±0.1% versus ±1%) and superior temperature coefficient stability (±25 ppm/°C versus ±50 ppm/°C), while maintaining identical package geometry and operating temperature range. The substitute part's higher power rating (0.167W versus 0.1W) provides additional thermal margin. Both components are suitable for direct substitution in 0603 thin film resistor applications requiring 18.7 Ohm resistance values.

Frequently Asked Questions (FAQ)

Q: Can the RP73PF1J18R7BTDF replace the RT0603FRE0718R7L in existing designs?

A: Yes. Both components share identical 0603 (1608 Metric) package geometry, footprint, and termination configuration. The substitute part meets or exceeds all electrical specifications of the main part.

Q: What are the key differences between these two parts?

A: The RP73PF1J18R7BTDF provides tighter tolerance (±0.1% versus ±1%), lower temperature coefficient (±25 ppm/°C versus ±50 ppm/°C), and higher power rating (0.167W versus 0.1W). Resistance value and package form factor are identical.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the RT0603FRE0718R7L and RP73PF1J18R7BTDF are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity ratings.

Q: Will the substitute part fit the same PCB footprint?

A: Yes. Both components use the 0603 (1608 Metric) package with identical maximum seated height of 0.022" (0.55mm) and two terminations. PCB footprints are interchangeable.

Q: What is the operating temperature range for both parts?

A: Both components operate across the identical temperature range of -55°C to 155°C.

Q: Is the higher power rating of the substitute part a concern for thermal management?

A: No. The higher power rating (0.167W versus 0.1W) of the RP73PF1J18R7BTDF provides additional thermal margin and does not negatively impact circuit performance or thermal design.