RT0603FRE0716R2L Equivalent & Substitute Parts

Part Overview

The RT0603FRE0716R2L is a 16.2 Ohm thin film chip resistor manufactured by YAGEO in the 0603 (1608 Metric) package format. This component is rated for 0.1W power dissipation with ±1% tolerance and operates across the temperature range of -55°C to 155°C. The part maintains Active product status and is RoHS3 compliant with MSL Level 1 rating, indicating suitability for standard PCB assembly processes without moisture sensitivity constraints.

Equivalent and substitute parts are identified when design requirements permit relaxation of tolerance specifications or when enhanced performance characteristics are acceptable within the application circuit. The substitute part listed offers improved tolerance and temperature coefficient performance while maintaining the same resistance value and package footprint.

Substiute Parts

RT0603FRE0716R2L

YAGEOIn Stock: 950RT0603FRE0716R2L Datasheet

Current PartRFQ

RP73PF1J16R2BTDF

TE Connectivity Passive ProductIn Stock: 2673RP73PF1J16R2BTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RT0603FRE0716R2L with the RP73PF1J16R2BTDF is permissible based on the following alignment of critical parameters:

• Resistance Value: Both parts specify 16.2 Ohms with no deviation
• Package Format: Both utilize 0603 (1608 Metric) package with identical footprint and termination count (2 terminations)
• Composition: Both are thin film resistors, ensuring similar frequency response and noise characteristics
• Operating Temperature Range: Both support -55°C to 155°C operation
• Compliance: Both are RoHS3 compliant and carry MSL Level 1 rating
• Physical Dimensions: Dimensions are equivalent within manufacturing tolerances (length 1.55–1.60mm, width 0.80mm, height 0.55mm maximum)

The RP73PF1J16R2BTDF represents an upgrade path due to improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), with increased power rating (0.167W versus 0.1W).

Parameter Comparison

Engineering Selection Recommendations

Both the RT0603FRE0716R2L and RP73PF1J16R2BTDF are Active products with full RoHS3 compliance and Level 1 MSL rating, confirming suitability for standard manufacturing environments without special handling requirements.

The RT0603FRE0716R2L is the primary selection when the application circuit tolerates ±1% resistance variation and standard temperature coefficient performance. This part is appropriate for general-purpose signal conditioning, biasing, and termination applications where tolerance stack-up analysis permits the wider specification band.

The RP73PF1J16R2BTDF serves as a direct substitute when circuit performance requires tighter tolerance control (±0.1%) or when thermal stability is critical due to the reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C). The increased power rating (0.167W) provides additional thermal margin in applications approaching the 0.1W dissipation limit. Both parts maintain identical footprint compatibility and thermal operating range, enabling direct PCB layout substitution without redesign.

Frequently Asked Questions (FAQ)

Q: Can the RP73PF1J16R2BTDF replace the RT0603FRE0716R2L in existing designs?

A: Yes. Both parts share identical 0603 package footprint, resistance value (16.2 Ohms), and operating temperature range (-55°C to 155°C). The RP73PF1J16R2BTDF is a direct mechanical and electrical substitute with improved tolerance and temperature coefficient specifications.

Q: What are the tolerance differences between these parts?

A: The RT0603FRE0716R2L specifies ±1% tolerance, while the RP73PF1J16R2BTDF specifies ±0.1% tolerance. The tighter tolerance of the substitute part reduces resistance variation across the production batch, beneficial for precision circuits where tolerance stack-up is a design constraint.

Q: How do temperature coefficients affect part selection?

A: The RT0603FRE0716R2L exhibits ±50ppm/°C temperature coefficient, while the RP73PF1J16R2BTDF exhibits ±25ppm/°C. Lower temperature coefficient means less resistance drift across the -55°C to 155°C operating range. Applications requiring stable resistance values across temperature extremes benefit from the substitute part's improved specification.

Q: Are there power rating differences?

A: Yes. The RT0603FRE0716R2L is rated for 0.1W dissipation, while the RP73PF1J16R2BTDF is rated for 0.167W. The higher power rating of the substitute provides additional thermal margin but does not affect footprint or thermal management approach for typical applications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are RoHS3 compliant, carry MSL Level 1 (Unlimited) rating, and maintain Active product status. No special moisture handling or storage procedures are required for either part.

Q: Are the physical dimensions identical?

A: Dimensions are equivalent within manufacturing tolerances. Both parts measure 0603 (1608 Metric) with maximum seated height of 0.022" (0.55mm). Length varies slightly (1.60mm versus 1.55mm) and width is identical at 0.80mm. These minor variations do not affect PCB layout or assembly compatibility.