RT0603FRE0716K5L Equivalent & Substitute Parts

Part Overview

The RT0603FRE0716K5L is a 16.5 kOhms ±1% thin film chip resistor in 0603 (1608 Metric) package manufactured by YAGEO. This component is actively produced and widely used in precision analog circuits, signal conditioning, and measurement applications where moderate tolerance and stable temperature performance are required. Alternative parts become necessary when higher tolerance specifications are needed, when specific manufacturer certifications (such as automotive AEC-Q200) are required, or when inventory constraints necessitate sourcing from alternative suppliers.

Substiute Parts

RT0603FRE0716K5L

YAGEOIn Stock: 3702RT0603FRE0716K5L Datasheet

Current PartRFQ

RT0603BRD0716K5L

YAGEOIn Stock: 9236RT0603BRD0716K5L Datasheet

UpgradeRFQ

RT0603BRE0716K5L

YAGEOIn Stock: 94169RT0603BRE0716K5L Datasheet

UpgradeRFQ

RT0603DRD0716K5L

YAGEOIn Stock: 15892RT0603DRD0716K5L Datasheet

UpgradeRFQ

RT0603DRE0716K5L

YAGEOIn Stock: 11262RT0603DRE0716K5L Datasheet

UpgradeRFQ

1-2176089-8

TE Connectivity Passive ProductIn Stock: 30141-2176089-8 Datasheet

DirectRFQ

ERA-3AEB1652V

Panasonic Electronic ComponentsIn Stock: 27399ERA-3AEB1652V Datasheet

UpgradeRFQ

RG1608P-1652-B-T5

SusumuIn Stock: 20743RG1608P-1652-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RT0603FRE0716K5L is determined by the following critical parameters:

Mandatory Compatibility Parameters:

• Resistance value: 16.5 kOhms (exact match required)
• Package: 0603 (1608 Metric) (physical and electrical compatibility)
• Composition: Thin Film (electrical performance characteristics)
• Operating temperature range: -55°C to 155°C (minimum requirement)
• RoHS3 compliance (regulatory requirement)

Allowable Variation Parameters:

• Tolerance: Can be equal to or tighter than ±1% (±0.1% or ±0.5% are acceptable upgrades)
• Power rating: Can be equal to or greater than 0.1W (1/6W is acceptable)
• Temperature coefficient: Can be equal to or better than ±50ppm/°C (±25ppm/°C is an upgrade)

Substitute parts are grouped into three categories: YAGEO RT series upgrades (tighter tolerance variants), direct cross-reference from TE Connectivity, and alternative manufacturers (Panasonic and Susumu) offering enhanced specifications or automotive certifications.

Parameter Comparison

Engineering Selection Recommendations

YAGEO RT Series Upgrades (RT0603BRD0716K5L, RT0603BRE0716K5L, RT0603DRD0716K5L, RT0603DRE0716K5L): These parts maintain YAGEO manufacturing continuity while offering improved tolerance specifications. Selection between B-series (±0.1%) and D-series (±0.5%) depends on circuit accuracy requirements. Temperature coefficient selection (±25ppm/°C vs. ±50ppm/°C) should be based on thermal stability needs across the -55°C to 155°C operating range.

TE Connectivity 1-2176089-8: This part provides a direct functional equivalent with enhanced power rating (0.167W vs. 0.1W) and tighter tolerance (±0.1%). Use this part when higher power dissipation capability is beneficial or when TE Connectivity supply chain integration is preferred. All electrical and thermal specifications remain compatible.

Panasonic ERA-3AEB1652V: Select this part when automotive AEC-Q200 certification is a design requirement. Specifications are electrically equivalent to YAGEO B-series parts with identical tolerance (±0.1%) and improved temperature coefficient (±25ppm/°C). RoHS3 compliance is confirmed.

Susumi RG1608P-1652-B-T5: This part combines AEC-Q200 automotive certification with anti-sulfur protection, making it suitable for harsh automotive and industrial environments. Electrical specifications match Panasonic ERA-3AEB1652V. Height is slightly reduced (0.020" vs. 0.022"), which may be advantageous in space-constrained layouts.

All substitute parts maintain ROHS3 compliance and MSL Level 1 (unlimited moisture sensitivity).

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD0716K5L directly replace RT0603FRE0716K5L? A: Yes. Both parts have identical resistance (16.5 kΩ), package (0603), power rating (0.1W), and operating temperature range (-55°C to 155°C). The RT0603BRD0716K5L offers improved tolerance (±0.1% vs. ±1%) and better temperature coefficient (±25ppm/°C vs. ±50ppm/°C), making it a direct upgrade with no circuit modifications required.

Q: What is the difference between RT0603BRD0716K5L and RT0603BRE0716K5L? A: Both parts have identical tolerance (±0.1%) and power rating (0.1W). The difference is temperature coefficient: RT0603BRD0716K5L has ±25ppm/°C while RT0603BRE0716K5L has ±50ppm/°C. Choose based on thermal stability requirements in your application.

Q: Why would I use 1-2176089-8 instead of a YAGEO part? A: The TE Connectivity part offers higher power rating (0.167W vs. 0.1W), which provides additional thermal margin in power-dissipative applications. It also features ±0.1% tolerance and ±25ppm/°C temperature coefficient. Use this part when supply chain diversification or higher power capability is needed.

Q: When should I specify ERA-3AEB1652V or RG1608P-1652-B-T5? A: Specify these parts when your design requires automotive AEC-Q200 certification. ERA-3AEB1652V is the standard automotive option. RG1608P-1652-B-T5 adds anti-sulfur protection for environments with corrosive atmospheric conditions. Both maintain full electrical compatibility with standard industrial parts.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant and have MSL Level 1 (unlimited moisture sensitivity), matching the original RT0603FRE0716K5L specifications.

Q: Can I use a part with higher tolerance (±0.5%) in place of ±1%? A: Yes. Parts with tighter tolerance (±0.5% or ±0.1%) are direct substitutes for ±1% applications. The tighter tolerance provides equal or better performance. However, using a looser tolerance part is not acceptable.

Q: Does package size vary among these parts? A: All parts use 0603 (1608 Metric) package. Physical dimensions are nearly identical (0.063" L × 0.031" W), with maximum seated height of 0.022" for most parts. Susumu RG1608P-1652-B-T5 has slightly reduced height (0.020"), which may be beneficial in space-constrained designs but does not affect compatibility.