RT0603FRE07158RL Equivalent & Substitute Parts

Part Overview

The RT0603FRE07158RL is a 158 Ohms ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package dimensions, and compatible electrical specifications within the 0603 form factor.

Substiute Parts

RT0603FRE07158RL

YAGEOIn Stock: 859RT0603FRE07158RL Datasheet

Current PartRFQ

RT0603BRD07158RL

YAGEOIn Stock: 5818RT0603BRD07158RL Datasheet

UpgradeRFQ

ERA-3AEB1580V

Panasonic Electronic ComponentsIn Stock: 12333ERA-3AEB1580V Datasheet

UpgradeRFQ

RP73PF1J158RBTDF

TE Connectivity Passive ProductIn Stock: 1749RP73PF1J158RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0603FRE07158RL are qualified based on the following criteria:

• Identical resistance value: 158 Ohms
• Compatible package: 0603 (1608 Metric) form factor
• Matching composition: Thin film construction
• Operating temperature range: -55°C ~ 155°C minimum
• RoHS3 compliance and MSL 1 rating
• Power rating equal to or greater than 0.1W

Substitutes are grouped into two categories: direct equivalents with ±0.1% tolerance (superior precision) and functionally compatible alternatives with enhanced power ratings or automotive qualification.

Parameter Comparison

Engineering Selection Recommendations

RT0603BRD07158RL serves as the primary substitute, offering identical package and power specifications with improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C). Both YAGEO parts maintain active product status and full RoHS3 compliance.

ERA-3AEB1580V provides an equivalent alternative with AEC-Q200 automotive qualification, suitable for applications requiring automotive-grade reliability. Tolerance and temperature coefficient match RT0603BRD07158RL specifications.

RP73PF1J158RBTDF from TE Connectivity offers enhanced power rating (0.167W versus 0.1W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Dimensions vary slightly (1.55mm length versus 1.60mm), remaining within 0603 package classification.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07158RL directly replace RT0603FRE07158RL?

A: Yes. Both components share identical 158 Ohms resistance, 0.1W power rating, 0603 package dimensions, and operating temperature range. RT0603BRD07158RL provides superior tolerance and temperature stability.

Q: Is ERA-3AEB1580V suitable for non-automotive applications?

A: Yes. AEC-Q200 qualification exceeds standard commercial requirements. The component is functionally compatible with all applications supporting the RT0603FRE07158RL specifications.

Q: What is the advantage of RP73PF1J158RBTDF?

A: Higher power rating (0.167W) provides thermal margin in applications approaching 0.1W dissipation limits. Tolerance and temperature coefficient match ERA-3AEB1580V performance.

Q: Are all substitutes available in Tape & Reel packaging?

A: Yes. All listed substitutes are supplied in Tape & Reel (TR) format, maintaining compatibility with automated assembly processes.

Q: Do tolerance differences affect circuit performance?

A: Tolerance differences (±1% versus ±0.1%) impact precision-dependent circuits. Applications requiring tighter resistance accuracy benefit from ±0.1% tolerance substitutes.

Q: Are there package dimension concerns with RP73PF1J158RBTDF?

A: RP73PF1J158RBTDF length is 1.55mm versus 1.60mm standard. Both dimensions fall within 0603 package specification and are compatible with standard PCB footprints.