RT0603FRE0713R7L Equivalent & Substitute Parts

Part Overview

The RT0603FRE0713R7L is a 13.7 Ohms ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Equivalent and substitute parts are identified to support procurement flexibility, inventory optimization, and design requirements where tolerance, power rating, or manufacturer specifications may differ from the original specification.

Substiute Parts

RT0603FRE0713R7L

YAGEOIn Stock: 1141RT0603FRE0713R7L Datasheet

Current PartRFQ

RT0603DRE0713R7L

YAGEOIn Stock: 10190RT0603DRE0713R7L Datasheet

UpgradeRFQ

RP73PF1J13R7BTDF

TE Connectivity Passive ProductIn Stock: 1127RP73PF1J13R7BTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0603FRE0713R7L are qualified based on the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 13.7 Ohms (exact match required)
• Package / Case: 0603 (1608 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (minimum requirement)
• RoHS Status: ROHS3 Compliant (minimum requirement)

Allowable Variation Parameters:

• Tolerance: May be equal to or tighter (lower) than ±1%
• Power Rating: May be equal to or higher than 0.1W
• Temperature Coefficient: May be equal to or lower (better stability)

Two substitute parts meet these criteria and are listed below.

Parameter Comparison

Engineering Selection Recommendations

RT0603DRE0713R7L (YAGEO): This substitute offers improved tolerance (±0.5% versus ±1%) while maintaining identical power rating, package, and operating temperature specifications. Both components are YAGEO RT series thin film resistors with ROHS3 compliance and unlimited moisture sensitivity rating. Selection of this part is appropriate where tighter tolerance is required without increasing power dissipation or changing thermal characteristics.

RP73PF1J13R7BTDF (TE Connectivity): This substitute provides the highest tolerance specification (±0.1%) and improved temperature coefficient (±25ppm/°C versus ±50ppm/°C), with increased power rating (0.167W versus 0.1W). The RP73 series from TE Connectivity Passive Product maintains 0603 package compatibility and ROHS3 compliance. Selection of this part is appropriate for applications requiring superior frequency stability, lower temperature drift, or higher power dissipation margin. Physical dimensions are within 0.002" variance in length (1.55mm versus 1.60mm).

All three parts are actively produced, ROHS3 compliant, and suitable for direct substitution in 0603 thin film resistor applications with 13.7 Ohms nominal resistance.

Frequently Asked Questions (FAQ)

Q: Can RT0603DRE0713R7L replace RT0603FRE0713R7L in any application?

A: Yes. RT0603DRE0713R7L is a direct substitute with identical resistance, package, power rating, and operating temperature range. The tighter tolerance (±0.5% versus ±1%) represents an improvement and does not create compatibility issues.

Q: What is the primary difference between RT0603DRE0713R7L and RP73PF1J13R7BTDF?

A: Both are 13.7 Ohms thin film resistors in 0603 package. RT0603DRE0713R7L is manufactured by YAGEO with ±0.5% tolerance and ±50ppm/°C temperature coefficient. RP73PF1J13R7BTDF is manufactured by TE Connectivity with superior ±0.1% tolerance, ±25ppm/°C temperature coefficient, and higher power rating (0.167W versus 0.1W).

Q: Are there physical compatibility concerns when substituting RP73PF1J13R7BTDF?

A: No. RP73PF1J13R7BTDF is specified at 0.061" L x 0.031" W (1.55mm x 0.80mm) versus the main part at 0.063" L x 0.031" W (1.60mm x 0.80mm). This 0.002" length difference is within standard PCB pad tolerance for 0603 packages and does not affect placement or soldering.

Q: Which substitute should be selected for high-frequency or precision applications?

A: RP73PF1J13R7BTDF is recommended for applications requiring superior frequency stability and lower temperature drift due to its ±25ppm/°C temperature coefficient and ±0.1% tolerance specification.

Q: Are all three parts ROHS3 compliant?

A: Yes. RT0603FRE0713R7L, RT0603DRE0713R7L, and RP73PF1J13R7BTDF are all ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited).