RT0603FRE0711RL Equivalent & Substitute Parts

Part Overview

The RT0603FRE0711RL is an 11 Ohms ±1% thin film chip resistor in 0603 (1608 Metric) package format, rated at 0.1W power dissipation. This component is manufactured by YAGEO and maintains Active product status with full RoHS3 compliance. Substitute parts are identified to address inventory availability, enhanced performance specifications, or alternative sourcing requirements while maintaining functional compatibility within the 0603 package envelope and 11 Ohm resistance value.

Substiute Parts

RT0603FRE0711RL

YAGEOIn Stock: 746RT0603FRE0711RL Datasheet

Current PartRFQ

RT0603BRD0711RL

YAGEOIn Stock: 10952RT0603BRD0711RL Datasheet

UpgradeRFQ

RP73PF1J11RBTDF

TE Connectivity Passive ProductIn Stock: 1119RP73PF1J11RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0603FRE0711RL is determined by strict adherence to the following parameters:

• Resistance value must equal 11 Ohms
• Package / Case must be 0603 (1608 Metric)
• Composition must be Thin Film
• Operating temperature range must encompass -55°C ~ 155°C
• RoHS3 compliance must be maintained
• Moisture Sensitivity Level must be 1 (Unlimited)

Tolerance and power rating may vary within acceptable engineering margins. Substitute parts identified below meet all mandatory criteria while offering enhanced tolerance specifications or increased power handling capacity.

Parameter Comparison

Engineering Selection Recommendations

RT0603BRD0711RL represents a direct upgrade path within the YAGEO RT series. This part maintains identical package dimensions and power rating while providing improved tolerance specification (±0.1% versus ±1%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C). Both components are manufactured by YAGEO with Active product status and full RoHS3 compliance.

RP73PF1J11RBTDF, manufactured by TE Connectivity Passive Product, offers enhanced power handling capacity (0.167W versus 0.1W) with equivalent tolerance and temperature coefficient performance. Physical dimensions remain compatible with 0603 package constraints. This part maintains Active product status and RoHS3 compliance, with REACH status listed as Vendor Undefined.

Selection between substitute parts depends on application requirements for tolerance precision, power dissipation margin, and manufacturer sourcing preferences. All three components satisfy the mandatory substitution criteria for 11 Ohm thin film resistors in 0603 package format.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD0711RL replace RT0603FRE0711RL in all applications?

A: Yes. Both components share identical resistance value, package format, power rating, and operating temperature range. RT0603BRD0711RL provides superior tolerance and temperature coefficient specifications, making it suitable for direct substitution.

Q: What is the primary difference between RT0603BRD0711RL and RP73PF1J11RBTDF?

A: The primary difference is power rating. RP73PF1J11RBTDF is rated at 0.167W (1/6W) compared to 0.1W (1/10W) for RT0603BRD0711RL. Both maintain ±0.1% tolerance and ±25ppm/°C temperature coefficient. RP73PF1J11RBTDF dimensions are 0.061" L x 0.031" W versus 0.063" L x 0.031" W for the YAGEO parts.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. RT0603BRD0711RL and RP73PF1J11RBTDF both maintain ROHS3 compliance, matching the original RT0603FRE0711RL specification.

Q: Can RP73PF1J11RBTDF be used in space-constrained PCB layouts?

A: RP73PF1J11RBTDF has a slightly shorter length (0.061" versus 0.063") compared to YAGEO parts, which may provide marginal benefit in extremely tight layouts. However, all three components are functionally equivalent within 0603 package envelope constraints.

Q: What is the moisture sensitivity rating for all substitute parts?

A: All three components maintain Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.