RT0603FRE07113KL Equivalent & Substitute Parts

Part Overview

The RT0603FRE07113KL is a 113 kOhms ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO, this component is active and in production. Substitute parts are identified based on matching resistance value, package dimensions, and compatible electrical specifications within the 0603 form factor. Alternative parts may be required due to inventory availability, enhanced tolerance specifications, automotive qualification requirements, or specific environmental performance needs.

Key Parameters

Parameter	Value
Resistance	113 kOhms
Tolerance	±1%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thin Film
Operating Temperature Range	-55°C ~ 155°C
Temperature Coefficient	±50ppm/°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the RT0603FRE07113KL are classified based on the following substitution criteria:

Upgrade Parts — Components with enhanced tolerance specifications (±0.1% or ±0.5%) while maintaining the same 0603 package, 113 kOhms resistance, 0.1W power rating, and -55°C ~ 155°C operating temperature range. These parts provide tighter resistance accuracy and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C).

Direct Substitute — The TE Connectivity part 9-2176089-4 maintains 113 kOhms ±0.1% resistance and 0603 package but features a higher power rating (0.167W / 1/6W) and is RoHS non-compliant.

Automotive-Qualified Upgrades — Panasonic ERA-3A series and Susumu RG1608P series parts meet AEC-Q200 automotive qualification with ±0.1% or ±0.5% tolerance, enhanced temperature coefficient performance, and ROHS3 compliance. The Susumu part includes anti-sulfur protection.

All substitute parts maintain the same 113 kOhms resistance value, 0603 package footprint, and -55°C ~ 155°C operating temperature range as the main part.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Temperature Coefficient	Package	RoHS Status	Automotive AEC-Q200
RT0603FRE07113KL	YAGEO	113 kOhms	±1%	0.1W	±50ppm/°C	0603	ROHS3 Compliant	No
RT0603BRD07113KL	YAGEO	113 kOhms	±0.1%	0.1W	±25ppm/°C	0603	ROHS3 Compliant	No
RT0603DRE07113KL	YAGEO	113 kOhms	±0.5%	0.1W	±50ppm/°C	0603	ROHS3 Compliant	No
9-2176089-4	TE Connectivity Passive Product	113 kOhms	±0.1%	0.167W	±25ppm/°C	0603	RoHS non-compliant	No
ERA-3AEB1133V	Panasonic Electronic Components	113 kOhms	±0.1%	0.1W	±25ppm/°C	0603	ROHS3 Compliant	Yes
ERA-3AED1133V	Panasonic Electronic Components	113 kOhms	±0.5%	0.1W	±25ppm/°C	0603	ROHS3 Compliant	Yes
RG1608P-1133-B-T5	Susumu	113 kOhms	±0.1%	0.1W	±25ppm/°C	0603	ROHS3 Compliant	Yes

Engineering Selection Recommendations

For Standard Industrial Applications — The RT0603BRD07113KL (YAGEO ±0.1%) or RT0603DRE07113KL (YAGEO ±0.5%) provide enhanced tolerance performance while maintaining ROHS3 compliance and the same 0603 package footprint. Both are active products with high inventory availability.

For Automotive Applications — The ERA-3AEB1133V (Panasonic ±0.1%) or RG1608P-1133-B-T5 (Susumu ±0.1%) are recommended. Both meet AEC-Q200 automotive qualification, maintain ROHS3 compliance, and feature ±25ppm/°C temperature coefficient. The Susumu part includes anti-sulfur protection for enhanced environmental resistance.

For Legacy or Non-Compliant Systems — The TE Connectivity 9-2176089-4 is a direct substitute with higher power rating (0.167W) but is RoHS non-compliant and should only be used in applications where RoHS compliance is not required.

All substitute parts maintain mechanical and electrical compatibility with the original RT0603FRE07113KL footprint and operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with ±0.1% tolerance in place of the ±1% RT0603FRE07113KL?

A: Yes. Parts with tighter tolerance specifications (±0.1% or ±0.5%) are electrically compatible and provide superior accuracy. The 0603 package footprint and resistance value remain identical. Verify that your circuit design does not require the specific temperature coefficient of the original part (±50ppm/°C vs. ±25ppm/°C for upgrades).

Q: What is the difference between the YAGEO RT0603BRD07113KL and RT0603DRE07113KL?

A: Both are YAGEO upgrades with improved tolerance. The RT0603BRD07113KL offers ±0.1% tolerance with ±25ppm/°C temperature coefficient. The RT0603DRE07113KL offers ±0.5% tolerance with ±50ppm/°C temperature coefficient (matching the original part's temperature coefficient). Select based on your accuracy requirements.

Q: Are the Panasonic ERA-3A and Susumu RG1608P parts suitable for automotive applications?

A: Yes. Both the ERA-3AEB1133V, ERA-3AED1133V (Panasonic), and RG1608P-1133-B-T5 (Susumu) are AEC-Q200 qualified for automotive use. The Susumu part includes anti-sulfur protection. All three maintain ROHS3 compliance.

Q: Does the TE Connectivity 9-2176089-4 have any advantages over the YAGEO parts?

A: The TE Connectivity part features a higher power rating (0.167W vs. 0.1W) and ±0.1% tolerance. However, it is RoHS non-compliant. Use only in applications where RoHS compliance is not a requirement.

Q: Will all substitute parts fit the same PCB footprint as the RT0603FRE07113KL?

A: Yes. All listed substitute parts use the 0603 (1608 Metric) package. Physical dimensions are equivalent, with minor variations in height (0.020" to 0.022" seated height). All parts are compatible with standard 0603 PCB footprints.

Q: What is the temperature coefficient, and why does it matter?

A: Temperature coefficient (ppm/°C) indicates how much the resistance value changes per degree Celsius. The original part has ±50ppm/°C; upgrade parts have ±25ppm/°C. Lower values mean better stability across temperature extremes. Select based on your circuit's temperature sensitivity requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message