RT0603FRE07105RL Equivalent & Substitute Parts

Part Overview

The RT0603FRE07105RL is a 105 Ohms ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and widely used in general-purpose electronic applications. Finding equivalent and substitute parts becomes necessary when managing supply chain continuity, optimizing procurement costs, or accommodating design revisions that permit tolerance or performance upgrades.

Substiute Parts

RT0603FRE07105RL

YAGEOIn Stock: 1176RT0603FRE07105RL Datasheet

Current PartRFQ

RT0603BRD07105RL

YAGEOIn Stock: 3987RT0603BRD07105RL Datasheet

UpgradeRFQ

ERA-3AEB1050V

Panasonic Electronic ComponentsIn Stock: 17116ERA-3AEB1050V Datasheet

UpgradeRFQ

RP73PF1J105RBTDF

TE Connectivity Passive ProductIn Stock: 1680RP73PF1J105RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0603FRE07105RL is determined by the following mandatory parameters:

• Resistance Value: Must be 105 Ohms
• Package / Case: Must be 0603 (1608 Metric)
• Composition: Must be Thin Film
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• Tolerance: May be equal to or tighter than ±1%
• Power Rating: May be equal to or greater than 0.1W
• Temperature Coefficient: May be equal to or lower in absolute value
• RoHS Compliance: Must maintain ROHS3 Compliant status

Three substitute parts meet these criteria and are grouped as follows:

Upgrade Category (Tighter Tolerance, Lower Temperature Coefficient): RT0603BRD07105RL and ERA-3AEB1050V both offer ±0.1% tolerance and ±25ppm/°C temperature coefficient, representing performance improvements over the base specification.

Upgrade Category (Higher Power Rating): RP73PF1J105RBTDF provides 0.167W (1/6W) power rating with ±0.1% tolerance and ±25ppm/°C temperature coefficient, suitable for applications requiring additional thermal headroom.

Parameter Comparison

Engineering Selection Recommendations

RT0603BRD07105RL (YAGEO): Direct manufacturer upgrade within the same series. Maintains identical package, power rating, and operating temperature range while improving tolerance to ±0.1% and reducing temperature coefficient to ±25ppm/°C. Suitable for applications requiring enhanced accuracy without changing thermal or mechanical specifications. Active product status with high inventory availability.

ERA-3AEB1050V (Panasonic Electronic Components): Equivalent performance to RT0603BRD07105RL with additional AEC-Q200 automotive qualification. Provides ±0.1% tolerance and ±25ppm/°C temperature coefficient. Recommended for automotive-grade applications or when automotive-qualified components are mandated by design or procurement specifications. Highest inventory availability among substitutes.

RP73PF1J105RBTDF (TE Connectivity Passive Product): Offers increased power rating of 0.167W (1/6W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Maintains 0603 package footprint. Suitable for applications where thermal margin improvement is required or where higher power dissipation capability provides design flexibility. Slightly smaller physical dimensions (1.55mm L vs. 1.60mm L) require PCB layout verification.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07105RL be used as a direct replacement for RT0603FRE07105RL?

A: Yes. Both components share identical resistance value, package, power rating, and operating temperature range. RT0603BRD07105RL provides tighter tolerance (±0.1% vs. ±1%) and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C), making it a direct upgrade with no design modifications required.

Q: What is the primary difference between ERA-3AEB1050V and the YAGEO alternatives?

A: ERA-3AEB1050V is manufactured by Panasonic and carries AEC-Q200 automotive qualification. Electrical and mechanical specifications are equivalent to RT0603BRD07105RL. Selection depends on automotive compliance requirements or supplier qualification mandates.

Q: Is RP73PF1J105RBTDF compatible with the same PCB footprint?

A: RP73PF1J105RBTDF uses the same 0603 (1608 Metric) package and is footprint-compatible. However, its physical length is 1.55mm compared to 1.60mm for the other parts. PCB layout verification is recommended to confirm clearance in space-constrained designs.

Q: Can I use RP73PF1J105RBTDF in place of RT0603FRE07105RL if my circuit requires higher power dissipation?

A: Yes. RP73PF1J105RBTDF provides 0.167W (1/6W) power rating versus 0.1W for the base part. All other electrical parameters (resistance, tolerance, temperature coefficient, operating range) are compatible or superior. This substitution is appropriate when thermal margin improvement is beneficial.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. RT0603BRD07105RL, ERA-3AEB1050V, and RP73PF1J105RBTDF are all ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited), matching the environmental compliance profile of RT0603FRE07105RL.

Q: Which substitute should I select for general-purpose applications without special requirements?

A: RT0603BRD07105RL is the recommended choice for general-purpose applications. It maintains YAGEO series continuity, offers performance improvements (tighter tolerance and lower temperature coefficient), and provides the highest inventory availability among direct equivalents.