RT0603DRD07280KL Equivalent & Substitute Parts

Part Overview

The RT0603DRD07280KL is a 280 kOhms ±0.5% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified when equivalent resistance values, package dimensions, and operating temperature ranges align with the original specification, enabling direct replacement in circuit applications where tolerance and power rating requirements are met.

Substiute Parts

RT0603DRD07280KL

YAGEOIn Stock: 718RT0603DRD07280KL Datasheet

Current PartRFQ

RT0603BRD07280KL

YAGEOIn Stock: 48641RT0603BRD07280KL Datasheet

UpgradeRFQ

3-2176090-3

TE Connectivity Passive ProductIn Stock: 16543-2176090-3 Datasheet

DirectRFQ

ERA-3AEB2803V

Panasonic Electronic ComponentsIn Stock: 22909ERA-3AEB2803V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0603DRD07280KL are qualified based on the following criteria:

Mandatory Matching Parameters:

• Resistance value: 280 kOhms
• Package / Case: 0603 (1608 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

• Tolerance: May be equal to or tighter than ±0.5%
• Power Rating: May be equal to or greater than 0.1W
• Manufacturer: Different manufacturers permitted
• Series designation: May differ

Three substitute parts meet these criteria and are categorized as follows:

Upgrade Substitutes (Tighter Tolerance):

• RT0603BRD07280KL (YAGEO, ±0.1% tolerance)
• ERA-3AEB2803V (Panasonic, ±0.1% tolerance with AEC-Q200 automotive qualification)

Direct Substitute (Higher Power Rating):

• 3-2176090-3 (TE Connectivity, 0.167W power rating)

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active product status and ROHS3 compliance, ensuring continued availability and regulatory alignment with the original RT0603DRD07280KL specification.

RT0603BRD07280KL provides tolerance improvement from ±0.5% to ±0.1% while maintaining identical power rating, package, and thermal characteristics. This upgrade is suitable for applications requiring tighter resistance accuracy without design modification.

3-2176090-3 from TE Connectivity offers increased power dissipation capability (0.167W versus 0.1W) with tighter tolerance (±0.1%). Physical dimensions are within 0603 package specification. This substitute accommodates higher power stress conditions while maintaining all other electrical and thermal parameters.

ERA-3AEB2803V from Panasonic combines ±0.1% tolerance with AEC-Q200 automotive qualification. This part is suitable for applications requiring automotive-grade reliability and tighter tolerance specifications. All electrical and thermal parameters remain equivalent to the original part.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07280KL replace RT0603DRD07280KL in any application?

A: Yes. RT0603BRD07280KL provides tighter tolerance (±0.1% versus ±0.5%) while maintaining identical resistance value, power rating, package dimensions, temperature coefficient, and operating temperature range. This represents an upgrade path with no functional limitations.

Q: What is the primary difference between the TE Connectivity 3-2176090-3 and the original part?

A: The 3-2176090-3 provides higher power rating (0.167W versus 0.1W) and tighter tolerance (±0.1% versus ±0.5%). Physical dimensions remain within 0603 package specification. This substitute is appropriate for circuits requiring greater power dissipation margin.

Q: Is ERA-3AEB2803V suitable for non-automotive applications?

A: Yes. ERA-3AEB2803V meets all electrical and thermal specifications of the original RT0603DRD07280KL. AEC-Q200 automotive qualification represents an additional quality assurance level and does not restrict use in non-automotive applications.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All substitute parts are supplied in Tape & Reel (TR) packaging, matching the original RT0603DRD07280KL format.

Q: What tolerance should be selected for precision analog circuits?

A: For applications requiring tighter tolerance control, RT0603BRD07280KL, 3-2176090-3, or ERA-3AEB2803V are all qualified with ±0.1% tolerance, compared to ±0.5% of the original part.