RT0603DRD07196KL Equivalent & Substitute Parts

Part Overview

The RT0603DRD07196KL is a 196 kOhms ±0.5% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package form factor, and electrical performance within acceptable tolerance and power rating parameters.

Substiute Parts

RT0603DRD07196KL

YAGEOIn Stock: 3043RT0603DRD07196KL Datasheet

Current PartRFQ

RT0603BRD07196KL

YAGEOIn Stock: 2839RT0603BRD07196KL Datasheet

UpgradeRFQ

1-2176090-8

TE Connectivity Passive ProductIn Stock: 13411-2176090-8 Datasheet

DirectRFQ

ERA-3AEB1963V

Panasonic Electronic ComponentsIn Stock: 5731ERA-3AEB1963V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Equivalent and substitute parts for the RT0603DRD07196KL are selected based on the following criteria:

Primary Matching Parameters:

• Resistance value: 196 kOhms (exact match required)
• Package form factor: 0603 (1608 Metric)
• Composition: Thin Film
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance

Tolerance Consideration: The main part specifies ±0.5% tolerance. Substitute parts with ±0.1% tolerance represent an upgrade in precision and are functionally compatible in applications where the original tolerance is acceptable.

Power Rating Consideration: The main part is rated at 0.1W. Substitute parts rated at 0.1W or higher (0.167W) are compatible, as higher power ratings provide equal or greater thermal capability.

Parameter Comparison

Engineering Selection Recommendations

RT0603BRD07196KL (YAGEO): Direct upgrade within the same manufacturer series. Identical package and power rating with improved ±0.1% tolerance. Recommended for applications requiring tighter tolerance specifications while maintaining YAGEO RT series consistency.

1-2176090-8 (TE Connectivity): Cross-manufacturer substitute with higher power rating (0.167W vs. 0.1W). Provides thermal margin in power-dissipation-sensitive applications. Slightly smaller physical dimensions (1.55mm vs. 1.60mm length). All electrical and environmental parameters remain compatible.

ERA-3AEB1963V (Panasonic): Automotive-grade substitute with AEC-Q200 qualification. Suitable for automotive and high-reliability applications. Maintains ±0.1% tolerance and identical thermal characteristics. REACH unaffected status confirmed.

All substitute parts maintain active product status and full RoHS3 compliance, ensuring long-term availability and regulatory conformance.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07196KL replace RT0603DRD07196KL directly? A: Yes. Both parts share identical package (0603), power rating (0.1W), resistance (196 kOhms), and operating temperature range (-55°C ~ 155°C). The substitute has tighter tolerance (±0.1% vs. ±0.5%), making it a functional upgrade.

Q: Is 1-2176090-8 suitable for the same PCB footprint? A: Yes. The 0603 (1608 Metric) package is identical. Physical dimensions are nearly equivalent (1.55mm vs. 1.60mm length, both 0.80mm width). Standard 0603 land patterns accommodate both parts.

Q: What is the advantage of ERA-3AEB1963V? A: This part carries AEC-Q200 automotive qualification, making it suitable for automotive and mission-critical applications. It maintains the same electrical performance and package compatibility as the main part.

Q: Are all substitutes ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant with MSL rating of 1 (Unlimited), matching the main part's compliance profile.

Q: Can I use a substitute with higher power rating (0.167W)? A: Yes. Higher power ratings provide equal or greater thermal capability and are functionally compatible. The 1-2176090-8 at 0.167W is suitable for applications where the original 0.1W rating is acceptable.

Q: Do tolerance differences affect circuit performance? A: Tolerance differences (±0.5% vs. ±0.1%) affect resistor value accuracy. Applications with strict tolerance requirements should use ±0.1% parts. For general-purpose circuits, both tolerances are typically acceptable.