Equivalent & Substitute Parts for RT0603DRD07105RL

Part Overview

The RT0603DRD07105RL is a 105 Ohms ±0.5% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and resistance value, allowing for direct board-level replacement or design optimization based on tolerance, power rating, or supplier availability requirements.

Substiute Parts

RT0603DRD07105RL

YAGEOIn Stock: 842RT0603DRD07105RL Datasheet

Current PartRFQ

RT0603BRD07105RL

YAGEOIn Stock: 3987RT0603BRD07105RL Datasheet

UpgradeRFQ

ERA-3AEB1050V

Panasonic Electronic ComponentsIn Stock: 17116ERA-3AEB1050V Datasheet

UpgradeRFQ

RP73PF1J105RBTDF

TE Connectivity Passive ProductIn Stock: 1680RP73PF1J105RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0603DRD07105RL is determined by the following criteria:

Primary Compatibility Requirements:

• Resistance value: 105 Ohms (exact match required)
• Package / Case: 0603 (1608 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Allowable Variation Parameters:

• Tolerance: May be equal to or tighter than ±0.5%
• Power Rating: May be equal to or greater than 0.1W
• Manufacturer: Different manufacturers permitted if all primary requirements met

All three substitute parts meet these criteria and are direct functional equivalents suitable for board-level replacement.

Parameter Comparison

Engineering Selection Recommendations

RT0603BRD07105RL (YAGEO): This substitute offers improved tolerance specification (±0.1% versus ±0.5%) while maintaining identical power rating, package, and thermal characteristics. Selection is appropriate when tighter tolerance performance is required without increasing power dissipation margins. ROHS3 compliance and active product status ensure continued availability.

ERA-3AEB1050V (Panasonic Electronic Components): This substitute provides ±0.1% tolerance with automotive AEC-Q200 qualification. Selection is appropriate for applications requiring automotive-grade reliability and qualification documentation. Identical electrical and thermal specifications with ROHS3 compliance support direct substitution in automotive or high-reliability applications.

RP73PF1J105RBTDF (TE Connectivity Passive Product): This substitute offers increased power rating (0.167W versus 0.1W) with ±0.1% tolerance, providing additional thermal margin in power-dissipation-sensitive circuits. Selection is appropriate when higher power headroom is beneficial. Mechanical dimensions remain compatible with 0603 footprint. ROHS3 compliance confirmed; REACH status listed as vendor undefined.

All three substitutes maintain active product status and full compliance with environmental regulations applicable to the main part.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07105RL be used as a direct replacement for RT0603DRD07105RL?

A: Yes. Both parts share identical resistance (105 Ohms), package (0603), power rating (0.1W), temperature coefficient (±25ppm/°C), operating range (-55°C ~ 155°C), and RoHS3 compliance. The RT0603BRD07105RL offers tighter tolerance (±0.1% versus ±0.5%), making it a functional upgrade with no compatibility concerns.

Q: What is the primary difference between ERA-3AEB1050V and the YAGEO substitutes?

A: ERA-3AEB1050V is manufactured by Panasonic and carries automotive AEC-Q200 qualification. Electrical and thermal specifications are identical to other substitutes. Selection depends on whether automotive-grade qualification and Panasonic supply chain are required for the application.

Q: Why does RP73PF1J105RBTDF have a higher power rating (0.167W)?

A: RP73PF1J105RBTDF is rated at 1/6W (0.167W) compared to 1/10W (0.1W) for other parts. This provides additional thermal dissipation capacity in the same 0603 package footprint. All other electrical parameters remain equivalent, making it suitable for applications where power margin is beneficial.

Q: Are all substitutes available in Tape & Reel packaging?

A: Yes. All parts listed, including the main part and all substitutes, are supplied in Tape & Reel (TR) packaging format.

Q: Do all substitutes meet RoHS3 compliance?

A: Yes. RT0603BRD07105RL, ERA-3AEB1050V, and RP73PF1J105RBTDF are all ROHS3 compliant, matching the environmental compliance status of the main part RT0603DRD07105RL.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes. All parts share the 0603 (1608 Metric) package footprint, identical lead spacing, and compatible height specifications (0.022" maximum seated height). Board-level layout and pick-and-place programming require no modification for substitution.

Q: What is the Moisture Sensitivity Level for all parts?

A: All parts, including substitutes, are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.