RT0603CRE07787RL Equivalent & Substitute Parts

Part Overview

The RT0603CRE07787RL is a 787 Ohm thin film chip resistor manufactured by YAGEO in the 0603 (1608 Metric) package format. This surface mount device delivers 0.1W power dissipation with ±0.25% tolerance and operates across the -55°C to 155°C temperature range. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Equivalent and substitute parts are identified when design requirements permit tolerance relaxation, power rating increases, or when alternative manufacturers offer superior performance characteristics or automotive-grade certifications within the same package footprint and electrical specifications.

Substiute Parts

RT0603CRE07787RL

YAGEOIn Stock: 1109RT0603CRE07787RL Datasheet

Current PartRFQ

RT0603BRD07787RL

YAGEOIn Stock: 9533RT0603BRD07787RL Datasheet

UpgradeRFQ

ERA-3AEB7870V

Panasonic Electronic ComponentsIn Stock: 11871ERA-3AEB7870V Datasheet

UpgradeRFQ

RG1608P-7870-B-T5

SusumuIn Stock: 5907RG1608P-7870-B-T5 Datasheet

UpgradeRFQ

RP73PF1J787RBTDF

TE Connectivity Passive ProductIn Stock: 4622RP73PF1J787RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 787 Ohms (exact match required)
• Package format: 0603 (1608 Metric) (physical and electrical compatibility)
• Composition: Thin Film (performance characteristics)
• Operating temperature range: -55°C to 155°C (minimum requirement)
• RoHS3 compliance (regulatory requirement)

Allowable Variation Parameters:

• Tolerance: May improve from ±0.25% to ±0.1% (tighter tolerance acceptable)
• Temperature coefficient: May improve from ±50ppm/°C to ±25ppm/°C (lower coefficient acceptable)
• Power rating: May increase from 0.1W to 0.167W (higher rating acceptable)
• Certifications: May add automotive AEC-Q200 or anti-sulfur features (enhancements acceptable)

All substitute parts listed maintain identical resistance, package, and operating temperature specifications while offering equal or superior electrical performance.

Parameter Comparison

Engineering Selection Recommendations

RT0603BRD07787RL (YAGEO): Direct upgrade from the primary part. Maintains identical manufacturer and series lineage while improving tolerance to ±0.1% and reducing temperature coefficient to ±25ppm/°C. Recommended for applications requiring enhanced precision without introducing supply chain complexity.

ERA-3AEB7870V (Panasonic Electronic Components): Suitable for automotive and harsh environment applications. Incorporates AEC-Q200 certification with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Select when automotive-grade reliability is specified or when Panasonic supply chain preference exists.

RG1608P-7870-B-T5 (Susumu): Optimal for automotive applications requiring anti-sulfur protection. Combines AEC-Q200 certification with anti-sulfur composition, ±0.1% tolerance, and ±25ppm/°C temperature coefficient. Height specification is 0.020" (0.50mm) versus 0.022" (0.55mm) for other variants—verify PCB clearance before selection.

RP73PF1J787RBTDF (TE Connectivity Passive Product): Applicable when higher power dissipation capacity is required. Rated at 0.167W (1/6W) versus 0.1W, with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Physical dimensions differ slightly (1.55mm length versus 1.60mm)—confirm PCB layout compatibility.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07787RL replace RT0603CRE07787RL in any application?

A: Yes. RT0603BRD07787RL provides superior electrical performance with tighter tolerance (±0.1% versus ±0.25%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C). Both parts share identical resistance, power rating, package, and operating temperature range. No design modifications are required.

Q: What is the difference between standard and automotive-grade variants?

A: ERA-3AEB7870V and RG1608P-7870-B-T5 carry AEC-Q200 automotive certification, indicating qualification for automotive temperature cycling, vibration, and reliability testing. These parts are mandatory for automotive applications; standard variants are not qualified for such use.

Q: Why does RG1608P-7870-B-T5 have a lower maximum height specification?

A: RG1608P-7870-B-T5 specifies 0.020" (0.50mm) maximum seated height versus 0.022" (0.55mm) for other variants. This represents a manufacturing tolerance difference within the 0603 package specification. Verify PCB component clearance and solder reflow profile compatibility before substitution.

Q: Is RP73PF1J787RBTDF compatible with designs rated for 0.1W power dissipation?

A: Yes. RP73PF1J787RBTDF is rated at 0.167W (1/6W), which exceeds the 0.1W requirement. Higher power rating provides design margin and does not create incompatibility. Physical dimensions differ slightly (1.55mm length)—confirm PCB footprint accommodation.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the primary part's environmental and regulatory qualifications.

Q: Which substitute offers the best overall performance upgrade?

A: Selection depends on application requirements. RT0603BRD07787RL provides the most direct upgrade within YAGEO's product line. RG1608P-7870-B-T5 offers maximum performance enhancement with automotive certification and anti-sulfur protection. RP73PF1J787RBTDF is optimal when higher power dissipation margin is needed.