RT0603CRE07332RL Equivalent & Substitute Parts

Part Overview

The RT0603CRE07332RL is a 332 Ohms ±0.25% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. This YAGEO RT series component is actively produced and ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1). The part operates across -55°C to 155°C with a temperature coefficient of ±50ppm/°C. Equivalent and substitute parts are identified for applications requiring alternative sourcing, improved tolerance specifications, higher power ratings, or automotive-grade certifications while maintaining the same resistance value and package footprint.

Substiute Parts

RT0603CRE07332RL

YAGEOIn Stock: 974RT0603CRE07332RL Datasheet

Current PartRFQ

RT0603BRD07332RL

YAGEOIn Stock: 15688RT0603BRD07332RL Datasheet

UpgradeRFQ

RT0603BRE07332RL

YAGEOIn Stock: 5875RT0603BRE07332RL Datasheet

UpgradeRFQ

ERA-3AEB3320V

Panasonic Electronic ComponentsIn Stock: 23515ERA-3AEB3320V Datasheet

UpgradeRFQ

RP73PF1J332RBTDF

TE Connectivity Passive ProductIn Stock: 3238RP73PF1J332RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0603CRE07332RL is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 332 Ohms
• Package type: 0603 (1608 Metric)
• Composition: Thin Film
• Operating temperature range: -55°C to 155°C minimum
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

Allowable Variation Parameters:

• Tolerance: May be equal or tighter (±0.25% or better)
• Power rating: May be equal or higher (0.1W or greater)
• Temperature coefficient: May be equal or lower absolute value
• Manufacturer: Different manufacturers acceptable if all parameters met

The four substitute parts listed below meet all mandatory matching criteria while offering improvements in tolerance, power rating, or automotive certification.

Parameter Comparison

Engineering Selection Recommendations

RT0603BRD07332RL (YAGEO): Direct upgrade within the same manufacturer series. Improves tolerance to ±0.1% and reduces temperature coefficient to ±25ppm/°C while maintaining identical power rating and package. Suitable for applications requiring tighter tolerance specifications without changing supplier.

RT0603BRE07332RL (YAGEO): Tighter tolerance variant (±0.1%) within YAGEO RT series. Maintains original ±50ppm/°C temperature coefficient. Provides tolerance improvement while preserving thermal characteristics of the original specification.

ERA-3AEB3320V (Panasonic): Automotive-grade AEC-Q200 certified thin film resistor. Offers ±0.1% tolerance and ±25ppm/°C temperature coefficient. Suitable for automotive applications or systems requiring automotive-grade component qualification. Highest inventory availability among substitutes.

RP73PF1J332RBTDF (TE Connectivity): Higher power rating variant at 0.167W (1/6W) in identical 0603 package. Provides ±0.1% tolerance and ±25ppm/°C temperature coefficient. Applicable where increased power dissipation margin is required without package size change.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07332RL directly replace RT0603CRE07332RL? A: Yes. Both parts share identical resistance (332 Ohms), package (0603), power rating (0.1W), and operating temperature range (-55°C to 155°C). RT0603BRD07332RL provides improved tolerance (±0.1% vs ±0.25%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it a direct upgrade.

Q: What is the difference between RT0603BRD07332RL and RT0603BRE07332RL? A: Both offer ±0.1% tolerance. RT0603BRD07332RL has ±25ppm/°C temperature coefficient, while RT0603BRE07332RL maintains ±50ppm/°C. Selection depends on thermal stability requirements of the application.

Q: Is ERA-3AEB3320V suitable for non-automotive applications? A: Yes. AEC-Q200 certification indicates automotive-grade reliability and is acceptable for general industrial and commercial applications. The automotive qualification ensures higher reliability standards applicable across all use cases.

Q: Can RP73PF1J332RBTDF be used in place of the original part? A: Yes, with consideration for the higher power rating (0.167W vs 0.1W). The increased power dissipation capability does not negatively impact circuit performance. Physical dimensions are nearly identical (1.55mm vs 1.60mm length), maintaining PCB layout compatibility.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitutes are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original part's environmental compliance profile.

Q: What determines if a part can substitute for RT0603CRE07332RL? A: The part must maintain 332 Ohms resistance, 0603 package format, thin film composition, -55°C to 155°C operating range, ROHS3 compliance, and MSL 1 rating. Tolerance and temperature coefficient may be equal or improved. Power rating may be equal or higher.