RT0603CRE07137RL Equivalent & Substitute Parts

Part Overview

The RT0603CRE07137RL is a 137 Ohms ±0.25% thin film chip resistor manufactured by YAGEO in the 0603 (1608 Metric) package format. This surface mount device is rated for 0.1W (1/10W) power dissipation and operates across the temperature range of -55°C to 155°C. The component is ROHS3 compliant with MSL 1 rating, indicating unlimited moisture sensitivity protection. As an active product with 1033 units in stock, substitute parts may be required for design optimization, supply chain flexibility, or enhanced performance specifications.

Substiute Parts

RT0603CRE07137RL

YAGEOIn Stock: 1097RT0603CRE07137RL Datasheet

Current PartRFQ

ERA-3AEB1370V

Panasonic Electronic ComponentsIn Stock: 31890ERA-3AEB1370V Datasheet

UpgradeRFQ

RP73PF1J137RBTDF

TE Connectivity Passive ProductIn Stock: 1152RP73PF1J137RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0603CRE07137RL is determined by the following critical parameters:

• Resistance value must equal 137 Ohms
• Package format must be 0603 (1608 Metric) for PCB footprint compatibility
• Composition must be thin film to maintain electrical characteristics
• Operating temperature range must encompass -55°C to 155°C minimum
• Tolerance and temperature coefficient determine precision requirements for the application
• Power rating must meet or exceed 0.1W minimum specification
• RoHS3 compliance and MSL 1 rating are mandatory for regulatory and environmental requirements

The identified substitute parts meet these core criteria while offering variations in tolerance and temperature coefficient specifications.

Parameter Comparison

Engineering Selection Recommendations

ERA-3AEB1370V (Panasonic Electronic Components) provides enhanced tolerance specification at ±0.1% compared to the original ±0.25%, with improved temperature coefficient of ±25ppm/°C. This part carries AEC-Q200 automotive qualification, suitable for applications requiring automotive-grade reliability. Power rating remains at 0.1W, matching the original specification. ROHS3 compliance and MSL 1 rating are maintained.

RP73PF1J137RBTDF (TE Connectivity Passive Product) offers increased power dissipation capability at 0.167W (1/6W), providing thermal margin above the original 0.1W rating. Tolerance specification is ±0.1% with temperature coefficient of ±25ppm/°C. Physical dimensions are 0.061" L x 0.031" W (1.55mm x 0.80mm), with height maintained at 0.022" maximum. ROHS3 compliance is confirmed; REACH status is vendor undefined. This part is suitable for applications requiring enhanced power handling within the same package footprint.

Both substitute parts maintain full compatibility with the 0603 package footprint and operating temperature range of -55°C to 155°C.

Frequently Asked Questions (FAQ)

Q: Can ERA-3AEB1370V replace RT0603CRE07137RL in all applications?

A: ERA-3AEB1370V is electrically compatible as a direct substitute. The improved tolerance (±0.1% vs ±0.25%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) make it suitable for precision-critical applications. The 0603 package footprint is identical, and operating temperature range is equivalent. AEC-Q200 qualification provides additional reliability assurance for automotive environments.

Q: What is the primary difference between RP73PF1J137RBTDF and the original part?

A: RP73PF1J137RBTDF provides higher power rating at 0.167W (1/6W) compared to 0.1W (1/10W) in the original. This allows greater thermal headroom in power-dissipation-sensitive circuits. Tolerance and temperature coefficient are improved to ±0.1% and ±25ppm/°C respectively. The 0603 package dimensions are functionally equivalent for PCB placement.

Q: Are all three parts interchangeable on the same PCB?

A: Yes, all three parts share the 0603 (1608 Metric) package format with identical footprint requirements. Electrical specifications are compatible across the operating temperature range of -55°C to 155°C. Physical height is maintained at 0.022" maximum for all parts, ensuring no clearance conflicts.

Q: Which substitute part should be selected for high-precision applications?

A: Both ERA-3AEB1370V and RP73PF1J137RBTDF offer ±0.1% tolerance with ±25ppm/°C temperature coefficient, compared to the original ±0.25% tolerance and ±50ppm/°C coefficient. Selection between these two depends on power dissipation requirements: ERA-3AEB1370V for standard 0.1W applications, RP73PF1J137RBTDF for applications requiring 0.167W capability.

Q: Are RoHS and MSL ratings consistent across all parts?

A: Yes, all three parts are ROHS3 compliant with MSL 1 (Unlimited) rating, meeting environmental and moisture sensitivity requirements for standard manufacturing and storage conditions.