RT0603BRE0782RL Equivalent & Substitute Parts

Part Overview

The RT0603BRE0782RL is a thin film chip resistor manufactured by YAGEO, rated at 82 Ohms with ±0.1% tolerance and 0.1W power rating in a 0603 (1608 Metric) surface mount package. This component is currently in active production status with 1034 units in stock. Equivalent and substitute parts are identified when they maintain identical electrical specifications, mechanical compatibility, and regulatory compliance across the same package form factor.

Substiute Parts

RT0603BRE0782RL

YAGEOIn Stock: 1127RT0603BRE0782RL Datasheet

Current PartRFQ

RT0603BRD0782RL

YAGEOIn Stock: 10658RT0603BRD0782RL Datasheet

UpgradeRFQ

ERA-3AEB820V

Panasonic Electronic ComponentsIn Stock: 8492ERA-3AEB820V Datasheet

UpgradeRFQ

RG1608P-820-B-T5

SusumuIn Stock: 6028RG1608P-820-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0603BRE0782RL is determined by strict equivalence across the following critical parameters:

• Resistance value: 82 Ohms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Power rating: 0.1W / 1/10W (exact match required)
• Package form factor: 0603 (1608 Metric) (exact match required)
• Operating temperature range: -55°C ~ 155°C (minimum requirement)
• Composition: Thin Film (exact match required)
• RoHS and regulatory compliance: ROHS3 Compliant, REACH Unaffected, EAR99 classification

All identified substitute parts meet these criteria. Additional features such as automotive AEC-Q200 qualification or anti-sulfur properties represent enhancements that do not affect basic substitutability.

Parameter Comparison

Engineering Selection Recommendations

All four parts are active production components with full ROHS3 compliance and REACH unaffected status, making them suitable for direct substitution in applications requiring 82 Ohm, ±0.1% tolerance thin film resistors in 0603 package form.

RT0603BRD0782RL (YAGEO) provides direct equivalence to the primary part with improved temperature coefficient performance (±25ppm/°C versus ±50ppm/°C) while maintaining identical mechanical and electrical specifications.

ERA-3AEB820V (Panasonic) and RG1608P-820-B-T5 (Susumu) are suitable for applications requiring automotive-grade components with AEC-Q200 qualification. The Susumu part additionally incorporates anti-sulfur properties and offers a reduced maximum seated height of 0.020" (0.50mm) compared to 0.022" (0.55mm) for other variants.

Selection should be based on application requirements for automotive qualification, environmental resistance properties, and PCB assembly height constraints.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD0782RL be used as a direct replacement for RT0603BRE0782RL?

A: Yes. Both parts are YAGEO thin film resistors with identical 82 Ohm resistance, ±0.1% tolerance, 0.1W power rating, and 0603 package specifications. The RT0603BRD0782RL features an improved temperature coefficient of ±25ppm/°C compared to ±50ppm/°C on the original part.

Q: What is the difference between standard and automotive-qualified versions?

A: ERA-3AEB820V and RG1608P-820-B-T5 carry AEC-Q200 automotive qualification, indicating compliance with automotive industry reliability and performance standards. These parts are suitable for automotive applications where such certification is required. Standard versions (YAGEO RT series) are suitable for general industrial and consumer applications.

Q: Are there mechanical compatibility concerns when substituting these parts?

A: All parts share the 0603 (1608 Metric) package form factor with compatible footprints. Maximum seated heights are 0.022" (0.55mm) for YAGEO and Panasonic parts, and 0.020" (0.50mm) for the Susumu part. The Susumu variant's reduced height may provide advantages in space-constrained PCB designs.

Q: Do all substitute parts meet the same regulatory requirements?

A: Yes. All four parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes. Moisture sensitivity level is MSL 1 (unlimited) across all variants.

Q: Which substitute part offers the best temperature stability?

A: ERA-3AEB820V, RT0603BRD0782RL, and RG1608P-820-B-T5 all feature a temperature coefficient of ±25ppm/°C, providing superior stability compared to the original RT0603BRE0782RL at ±50ppm/°C.