Equivalent & Substitute Parts for RT0510R-152-M

Part Overview

The RT0510R-152-M is a 1.5 kOhms ±20% thin film chip resistor manufactured by Susumu in the 0402 (1005 Metric) package format. This component is rated for 0.063W (1/16W) power dissipation and operates across a temperature range of -55°C to 155°C. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Equivalent and substitute parts are necessary when the original component becomes unavailable, when design requirements demand improved tolerance specifications, or when automotive-grade certifications are required for specific applications. Substitute parts maintain the same resistance value and package footprint while offering enhanced electrical characteristics such as tighter tolerances, improved temperature coefficients, or automotive qualification.

Key Parameters

Parameter	Value
Resistance	1.5 kOhms
Tolerance	±20%
Power Rating	0.063W (1/16W)
Package / Case	0402 (1005 Metric)
Composition	Thin Film
Operating Temperature Range	-55°C ~ 155°C
Temperature Coefficient	±100ppm/°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the RT0510R-152-M is determined by the following critical parameters:

Mandatory Compatibility Parameters:

Resistance value: 1.5 kOhms (exact match required)
Package format: 0402 (1005 Metric) (physical and electrical compatibility)
Power rating: 0.063W minimum (1/16W)
Composition: Thin film technology
Operating temperature range: Minimum -55°C to 155°C coverage
RoHS compliance: ROHS3 Compliant

Tolerance Specifications: Substitute parts are grouped by tolerance rating. The RT0510R-152-M operates at ±20% tolerance. Substitute parts with tighter tolerances (±0.1%, ±0.5%, ±1%) are direct upgrades that maintain full compatibility while improving circuit accuracy. Parts with looser tolerances are not suitable substitutes.

Temperature Coefficient: The RT0510R-152-M exhibits ±100ppm/°C temperature coefficient. Substitute parts with lower temperature coefficients (±25ppm/°C or ±50ppm/°C) provide improved stability across the operating temperature range.

Automotive and Compliance Ratings: Certain substitute parts carry AEC-Q200 automotive qualification or anti-sulfur features. These certifications do not affect basic substitutability but indicate enhanced reliability for specific application environments.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Package	Features	RoHS
RT0510R-152-M	Susumu	1.5 kΩ	±20%	0.063	±100	-55 ~ 155	0402	—	ROHS3
RG1005P-152-B-T5	Susumu	1.5 kΩ	±0.1%	0.063	±25	-55 ~ 155	0402	Anti-Sulfur, AEC-Q200	ROHS3
RG1005P-152-D-T10	Susumu	1.5 kΩ	±0.5%	0.063	±25	-55 ~ 155	0402	Anti-Sulfur, AEC-Q200	ROHS3
RR0510P-152-D	Susumu	1.5 kΩ	±0.5%	0.063	±25	-55 ~ 125	0402	—	ROHS3
CPF0402B1K5E1	TE Connectivity	1.5 kΩ	±0.1%	0.063	±25	-55 ~ 155	0402	—	ROHS3
ERA-2AEB152X	Panasonic	1.5 kΩ	±0.1%	0.063	±25	-55 ~ 155	0402	AEC-Q200	ROHS3
ERA-2AED152X	Panasonic	1.5 kΩ	±0.5%	0.063	±25	-55 ~ 155	0402	AEC-Q200	ROHS3
MCS04020C1501FE000	Vishay Beyschlag	1.5 kΩ	±1%	0.063	±50	-55 ~ 155	0402	Anti-Sulfur	ROHS3
RT0402BRD071K5L	YAGEO	1.5 kΩ	±0.1%	0.063	±25	-55 ~ 155	0402	—	ROHS3
RT0402BRE071K5L	YAGEO	1.5 kΩ	±0.1%	0.063	±50	-55 ~ 155	0402	—	ROHS3
RT0402DRD071K5L	YAGEO	1.5 kΩ	±0.5%	0.063	±25	-55 ~ 155	0402	—	ROHS3

Engineering Selection Recommendations

All substitute parts listed maintain full compatibility with the RT0510R-152-M in terms of package footprint, power rating, and operating temperature range. Selection among substitutes depends on application-specific requirements:

For Standard Applications: Parts with ±0.5% tolerance (RG1005P-152-D-T10, ERA-2AED152X, RT0402DRD071K5L) provide improved accuracy over the original ±20% specification while maintaining cost efficiency. These parts are suitable for general-purpose circuit applications where moderate tolerance improvement is beneficial.

For Precision Circuit Applications: Parts with ±0.1% tolerance (RG1005P-152-B-T5, CPF0402B1K5E1, ERA-2AEB152X, RT0402BRD071K5L) deliver superior resistance accuracy and lower temperature coefficients (±25ppm/°C). These components are appropriate for analog signal conditioning, reference circuits, and measurement applications.

For Automotive Applications: Parts carrying AEC-Q200 certification (RG1005P-152-B-T5, RG1005P-152-D-T10, ERA-2AEB152X, ERA-2AED152X) are qualified for automotive environments and include anti-sulfur features. These parts are required for automotive-grade designs and harsh environmental conditions.

For Anti-Sulfur Environments: Parts with anti-sulfur features (RG1005P-152-B-T5, RG1005P-152-D-T10, MCS04020C1501FE000) provide enhanced reliability in industrial environments with corrosive atmospheres.

Temperature Range Consideration: The RR0510P-152-D operates to 125°C maximum, which is below the original part's 155°C upper limit. This part is suitable only for applications where the maximum operating temperature does not exceed 125°C.

All substitute parts maintain ROHS3 compliance and MSL 1 (unlimited moisture sensitivity) ratings consistent with the original component.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RT0510R-152-M with a part having a different tolerance?

A: Yes. Substitute parts with tighter tolerances (±0.1%, ±0.5%, ±1%) are direct upgrades and fully compatible. The original ±20% tolerance is the loosest specification in the substitute list. Parts with tighter tolerances will improve circuit accuracy without affecting physical or electrical compatibility.

Q: What is the difference between ±0.1% and ±0.5% tolerance parts?

A: Tolerance specifies the maximum deviation from the nominal 1.5 kOhms resistance value. A ±0.1% part deviates by maximum ±1.5 ohms, while a ±0.5% part deviates by maximum ±7.5 ohms. Selection depends on circuit accuracy requirements. Precision analog circuits typically require ±0.1% tolerance, while general-purpose applications often accept ±0.5%.

Q: Are AEC-Q200 certified parts required for my application?

A: AEC-Q200 certification is required only for automotive applications or environments with extreme temperature cycling, vibration, or corrosive atmospheres. For standard industrial or consumer applications, non-certified parts are acceptable. AEC-Q200 parts carry no disadvantage if used in non-automotive applications.

Q: What does temperature coefficient mean, and why does it matter?

A: Temperature coefficient (ppm/°C) indicates how much the resistance value changes per degree Celsius of temperature change. The RT0510R-152-M has ±100ppm/°C, meaning resistance can shift significantly across the -55°C to 155°C operating range. Substitute parts with ±25ppm/°C or ±50ppm/°C coefficients provide superior stability. For circuits sensitive to resistance drift, lower temperature coefficients are preferred.

Q: Can I use RT0402BRE071K5L as a direct replacement for RT0402BRD071K5L?

A: Both parts are physically and electrically compatible with identical ±0.1% tolerance and 0402 package. The primary difference is temperature coefficient: RT0402BRE071K5L has ±50ppm/°C while RT0402BRD071K5L has ±25ppm/°C. For applications requiring maximum temperature stability, RT0402BRD071K5L is preferred. For general applications, both are interchangeable.

Q: Why does RR0510P-152-D have a lower maximum operating temperature?

A: The RR0510P-152-D is rated to 125°C maximum, compared to 155°C for most other substitutes. This part is suitable only for applications where circuit operating temperature remains below 125°C. If your application requires operation up to 155°C, select alternative parts with the full temperature range.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) packaging?

A: Tape & Reel packaging is supplied on continuous reels suitable for automated pick-and-place assembly. Cut Tape & Digi-Reel packaging (as used for ERA-2AED152X) is supplied in smaller quantities on tape strips. Both formats contain identical components; packaging choice depends on production volume and assembly equipment compatibility.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed carry ROHS3 compliance certification, matching the original RT0510R-152-M. This ensures compatibility with environmental regulations and customer requirements across all regions.

Q: Can I mix different substitute parts in the same circuit board design?

A: Yes. All substitute parts are physically and electrically compatible with identical 0402 package footprints and 1.5 kOhms resistance. Mixing parts with different tolerances or temperature coefficients in the same design is acceptable from a compatibility standpoint. However, circuit performance may vary if different tolerance grades are used in critical measurement or reference circuits where uniform accuracy is required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message