RT0402FRE0760R4L Equivalent & Substitute Parts

Part Overview

The RT0402FRE0760R4L is a 60.4 Ohm ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This component is rated for 0.063W (1/16W) power dissipation with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL 1 (Unlimited) moisture sensitivity rating. As an active product with 702 units in stock, substitute parts may be required due to design upgrades, supply chain optimization, or application-specific performance requirements.

Substiute Parts

RT0402FRE0760R4L

YAGEOIn Stock: 712RT0402FRE0760R4L Datasheet

Current PartRFQ

RT0402BRD0760R4L

YAGEOIn Stock: 11282RT0402BRD0760R4L Datasheet

UpgradeRFQ

CPF0402B60R4E1

TE Connectivity Passive ProductIn Stock: 1869CPF0402B60R4E1 Datasheet

UpgradeRFQ

ERA-2AEB60R4X

Panasonic Electronic ComponentsIn Stock: 17078ERA-2AEB60R4X Datasheet

UpgradeRFQ

RG1005P-60R4-D-T10

SusumuIn Stock: 10684RG1005P-60R4-D-T10 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0402FRE0760R4L is determined by the following critical parameters:

• Resistance value: 60.4 Ohms (exact match required)
• Package type: 0402 (1005 Metric) (exact match required)
• Power rating: 0.063W minimum (equal or higher acceptable)
• Composition: Thin film construction
• Operating temperature range: -55°C to 155°C minimum (equal or wider acceptable)
• RoHS compliance: ROHS3 Compliant (required)
• MSL rating: 1 (Unlimited) (equal or better acceptable)

Tolerance and temperature coefficient variations are permitted within the substitute group, as these represent performance enhancements or alternative specifications suitable for different application requirements. All substitute parts maintain identical mechanical dimensions and electrical base specifications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full compatibility with the RT0402FRE0760R4L in terms of mechanical fit, electrical base specifications, and regulatory compliance. Selection among substitutes should be based on the following criteria:

RT0402BRD0760R4L (YAGEO) provides a direct upgrade path with improved tolerance (±0.1% vs ±1%) and reduced temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining the same manufacturer and series lineage. This option is suitable for applications requiring tighter tolerance specifications without introducing new supplier dependencies.

CPF0402B60R4E1 (TE Connectivity) offers equivalent performance specifications to the YAGEO upgrade option with ±0.1% tolerance and ±25ppm/°C temperature coefficient. This part is appropriate for designs requiring multi-source qualification or TE Connectivity supply chain integration.

ERA-2AEB60R4X (Panasonic) combines ±0.1% tolerance with AEC-Q200 automotive qualification. This part is specified for automotive applications requiring automotive-grade component certification.

RG1005P-60R4-D-T10 (Susumu) provides AEC-Q200 automotive qualification with anti-sulfur coating and ±0.5% tolerance. This part is specified for automotive applications in corrosive environments or where anti-sulfur protection is required.

Frequently Asked Questions (FAQ)

Q: Can RT0402BRD0760R4L be used as a direct replacement for RT0402FRE0760R4L?

A: Yes. Both parts share identical resistance value (60.4 Ohms), package (0402), power rating (0.063W), and operating temperature range (-55°C to 155°C). The RT0402BRD0760R4L provides improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it a performance upgrade.

Q: What is the difference between automotive-rated and standard versions?

A: ERA-2AEB60R4X and RG1005P-60R4-D-T10 carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and environmental testing standards. Standard versions (RT0402FRE0760R4L, RT0402BRD0760R4L, CPF0402B60R4E1) do not carry this certification. Automotive-rated parts are required for applications subject to automotive qualification requirements.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All listed parts are supplied in Tape & Reel (TR) packaging in the 0402 (1005 Metric) package format. Physical dimensions and termination count are identical across all substitutes.

Q: What does MSL 1 (Unlimited) mean for these components?

A: MSL 1 (Unlimited) indicates the lowest moisture sensitivity level. These components can be stored indefinitely without moisture bake-out requirements prior to soldering, providing maximum handling flexibility.

Q: Can I substitute based on tolerance requirements alone?

A: No. Substitution must maintain the exact resistance value (60.4 Ohms) and package format (0402). Tolerance is a secondary parameter that may be upgraded but cannot be the sole basis for substitution selection.