RT0402FRE07475RL Equivalent & Substitute Parts

Part Overview

The RT0402FRE07475RL is a 475 Ohm ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This surface mount resistor is rated for 0.063W (1/16W) power dissipation and operates across -55°C to 155°C. The part is ROHS3 compliant and carries MSL 1 (Unlimited) moisture sensitivity rating, making it suitable for general industrial and commercial applications.

Substitute parts are identified when equivalent resistance values, package dimensions, power ratings, and operating temperature ranges align with the main part specification. Higher tolerance grades (±0.1% vs ±1%) and improved temperature coefficients represent performance upgrades rather than direct replacements.

Key Parameters

Parameter	Value
Resistance	475 Ohms
Tolerance	±1%
Power Rating	0.063W (1/16W)
Package	0402 (1005 Metric)
Composition	Thin Film
Operating Temperature	-55°C to 155°C
Temperature Coefficient	±50ppm/°C
RoHS Status	ROHS3 Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Resistance Value: Must be 475 Ohms
Package Type: Must be 0402 (1005 Metric)
Power Rating: Must be 0.063W (1/16W) minimum
Composition: Thin film construction
Operating Temperature Range: Must cover -55°C to 155°C or equivalent
Termination Count: 2 terminations required
RoHS Compliance: ROHS3 Compliant

Parts listed as substitutes meet all mandatory criteria. Tolerance grades (±1%, ±0.1%, ±0.5%) and temperature coefficients vary; tighter tolerances and lower temperature coefficients represent performance enhancements. All substitute parts maintain mechanical and electrical compatibility with the RT0402FRE07475RL footprint and functional requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Package	RoHS Status
RT0402FRE07475RL	YAGEO	475 Ω	±1%	0.063	±50	-55 to 155	0402	ROHS3
RT0402BRD07475RL	YAGEO	475 Ω	±0.1%	0.063	±25	-55 to 155	0402	ROHS3
CPF0402B475RE1	TE Connectivity	475 Ω	±0.1%	0.063	±25	-55 to 155	0402	ROHS3
ERA-2AEB4750X	Panasonic	475 Ω	±0.1%	0.063	±25	-55 to 155	0402	ROHS3
RN73C1E475RBTDF	TE Connectivity	475 Ω	±0.1%	0.063	±10	-55 to 155	0402	ROHS3
RR0510P-4750-D	Susumu	475 Ω	±0.5%	0.063	±25	-55 to 125	0402	ROHS3

Engineering Selection Recommendations

RT0402BRD07475RL (YAGEO): Direct upgrade from the main part within the same manufacturer family. Improves tolerance to ±0.1% and reduces temperature coefficient to ±25ppm/°C while maintaining identical package and operating temperature range. Recommended for applications requiring tighter resistance accuracy.

CPF0402B475RE1 (TE Connectivity): Equivalent performance to RT0402BRD07475RL with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Maintains full operating temperature range and ROHS3 compliance. Suitable for cross-manufacturer substitution where TE Connectivity supply chain is preferred.

ERA-2AEB4750X (Panasonic): Offers ±0.1% tolerance with AEC-Q200 automotive qualification. Temperature coefficient matches other ±0.1% alternatives at ±25ppm/°C. Recommended for automotive-grade applications or where AEC-Q200 certification is required. Height specification increases to 0.016" (0.40mm) maximum.

RN73C1E475RBTDF (TE Connectivity): Provides superior temperature stability with ±10ppm/°C coefficient and ±0.1% tolerance. Recommended for precision analog circuits and temperature-sensitive applications. Maintains -55°C to 155°C operating range.

RR0510P-4750-D (Susumu): Maintains ±0.5% tolerance with ±25ppm/°C temperature coefficient. Operating temperature range reduces to -55°C to 125°C. Suitable for general-purpose applications where the lower temperature ceiling is acceptable and cost optimization is prioritized.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with ±0.1% tolerance in place of the ±1% RT0402FRE07475RL?

A: Yes. All listed ±0.1% tolerance parts (RT0402BRD07475RL, CPF0402B475RE1, ERA-2AEB4750X, RN73C1E475RBTDF) are direct functional upgrades. Tighter tolerance represents improved accuracy and does not create compatibility issues. Verify circuit design does not depend on the original ±1% tolerance specification.

Q: What is the difference between RT0402FRE07475RL and RT0402BRD07475RL?

A: Both are YAGEO 0402 package 475 Ohm resistors. The primary differences are tolerance (±1% vs ±0.1%) and temperature coefficient (±50ppm/°C vs ±25ppm/°C). The BRD variant provides superior stability and accuracy. Mechanical footprint and power rating are identical.

Q: Is ERA-2AEB4750X suitable for non-automotive applications?

A: Yes. AEC-Q200 certification indicates automotive-grade reliability but does not restrict use in other applications. The part meets all standard specifications for general industrial and commercial use. The certification represents an additional qualification level.

Q: Why does RR0510P-4750-D have a lower maximum operating temperature?

A: The Susumu RR0510P-4750-D is specified to -55°C to 125°C, compared to -55°C to 155°C for other substitutes. Verify your application's maximum operating temperature requirement. If sustained operation above 125°C is required, select an alternative substitute.

Q: Are all substitute parts available in Tape & Reel (TR) packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel packaging suitable for automated assembly processes. Packaging format matches the main part specification.

Q: Can I mix different substitute parts in the same production run?

A: All substitute parts maintain identical 0402 package dimensions and footprint compatibility. Mixing is mechanically feasible. Verify tolerance and temperature coefficient specifications do not conflict with circuit design requirements for each application.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message