RT0402FRE07365RL Equivalent & Substitute Parts

Part Overview

The RT0402FRE07365RL is a 365 Ohm ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This surface mount resistor is rated for 0.063W (1/16W) power dissipation and operates across -55°C to 155°C. The part is ROHS3 compliant and carries MSL 1 (Unlimited) moisture sensitivity rating, indicating suitability for standard PCB assembly processes without moisture bake-out requirements. Substitute parts are identified where electrical parameters (resistance value, tolerance, power rating, package) and mechanical dimensions remain compatible with the original specification.

Substiute Parts

RT0402FRE07365RL

YAGEOIn Stock: 1136RT0402FRE07365RL Datasheet

Current PartRFQ

RT0402BRD07365RL

YAGEOIn Stock: 9527RT0402BRD07365RL Datasheet

UpgradeRFQ

CPF0402B365RE1

TE Connectivity Passive ProductIn Stock: 1861CPF0402B365RE1 Datasheet

UpgradeRFQ

ERA-2AEB3650X

Panasonic Electronic ComponentsIn Stock: 831ERA-2AEB3650X Datasheet

UpgradeRFQ

RN73C1E365RBTDF

TE Connectivity Passive ProductIn Stock: 789RN73C1E365RBTDF Datasheet

UpgradeRFQ

RR0510P-3650-D

SusumuIn Stock: 1049RR0510P-3650-D Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0402FRE07365RL are qualified based on the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 365 Ohms (exact match required)
• Package / Case: 0402 (1005 Metric) (exact match required)
• Power rating: 0.063W minimum (1/16W)
• Composition: Thin Film
• Operating temperature range: Must encompass or match -55°C to 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1 or equivalent

Allowable Variation Parameters:

• Tolerance: May be equal to or tighter than ±1% (±0.1%, ±0.5% are acceptable)
• Temperature coefficient: May be equal to or better than ±50ppm/°C
• Packaging format: Tape & Reel (TR) or Cut Tape (CT) formats are interchangeable in manufacturing context
• Supplier device package designation: Variations permitted if physical dimensions remain identical

All identified substitutes maintain identical physical dimensions (0.039" L x 0.020" W / 1.00mm x 0.50mm) and seated height specifications within acceptable manufacturing tolerances.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain active product status and ROHS3 compliance. Selection among substitutes should be based on the following engineering considerations derived from provided specifications:

Tolerance Requirements: If circuit design requires tolerance tighter than ±1%, select from RT0402BRD07365RL, CPF0402B365RE1, ERA-2AEB3650X, or RN73C1E365RBTDF (all ±0.1%). The RR0510P-3650-D offers ±0.5% tolerance as an intermediate option.

Temperature Coefficient Stability: RN73C1E365RBTDF provides the lowest temperature coefficient at ±10ppm/°C. RT0402BRD07365RL, CPF0402B365RE1, and ERA-2AEB3650X offer ±25ppm/°C. RR0510P-3650-D and the original RT0402FRE07365RL provide ±25ppm/°C and ±50ppm/°C respectively.

Operating Temperature Range: RR0510P-3650-D operates to 125°C maximum, which is 30°C below the original specification. This part is suitable only for applications where the upper temperature limit does not exceed 125°C.

Automotive Applications: ERA-2AEB3650X carries AEC-Q200 automotive qualification. This part is specified for automotive-grade applications requiring formal qualification documentation.

Packaging Format Compatibility: ERA-2AEB3650X is supplied in Cut Tape (CT) & Digi-Reel format rather than standard Tape & Reel. Verify compatibility with receiving and placement equipment before selection.

Frequently Asked Questions (FAQ)

Q: Can RT0402BRD07365RL directly replace RT0402FRE07365RL? A: Yes. Both parts share identical resistance (365 Ω), package (0402), power rating (0.063W), and operating temperature range (-55°C ~ 155°C). RT0402BRD07365RL offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it a direct upgrade.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Both are surface mount packaging formats suitable for automated assembly. Tape & Reel (TR) is continuous reel format for high-volume pick-and-place operations. Cut Tape (CT) is pre-cut tape segments. ERA-2AEB3650X uses Digi-Reel, a proprietary reel format. Verify compatibility with your assembly equipment before specifying.

Q: Why does RR0510P-3650-D have a lower maximum operating temperature? A: RR0510P-3650-D is specified for -55°C ~ 125°C, which is 30°C below the original part's 155°C maximum. This part is suitable only for applications where circuit operation does not exceed 125°C. Verify thermal requirements before substitution.

Q: Is ERA-2AEB3650X suitable for automotive applications? A: ERA-2AEB3650X carries AEC-Q200 automotive qualification. This part is specified for automotive-grade applications. Use this part only if automotive qualification is required by design specification.

Q: What tolerance should I specify for general-purpose applications? A: The original RT0402FRE07365RL specifies ±1% tolerance. For applications requiring tighter tolerance control, RT0402BRD07365RL, CPF0402B365RE1, ERA-2AEB3650X, or RN73C1E365RBTDF (all ±0.1%) are direct substitutes. RR0510P-3650-D offers ±0.5% as an intermediate option.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All identified substitute parts carry ROHS3 compliance certification and MSL 1 (Unlimited) moisture sensitivity rating, matching the original part's environmental compliance profile.