Equivalent & Substitute Parts for RT0402FRE07267RL

Part Overview

The RT0402FRE07267RL is a 267 Ohms ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). The part is supplied in Tape & Reel packaging suitable for automated assembly processes.

Substitute parts are identified based on matching electrical specifications (resistance value, power rating, package dimensions) and mechanical compatibility while allowing for tolerance and temperature coefficient improvements.

Substiute Parts

RT0402FRE07267RL

YAGEOIn Stock: 1172RT0402FRE07267RL Datasheet

Current PartRFQ

RT0402BRD07267RL

YAGEOIn Stock: 11813RT0402BRD07267RL Datasheet

UpgradeRFQ

CPF0402B267RE1

TE Connectivity Passive ProductIn Stock: 1863CPF0402B267RE1 Datasheet

UpgradeRFQ

ERA-2AEB2670X

Panasonic Electronic ComponentsIn Stock: 13034ERA-2AEB2670X Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0402FRE07267RL is determined by the following criteria:

• Resistance value must be 267 Ohms
• Package must be 0402 (1005 Metric) with identical physical dimensions (0.039" L x 0.020" W)
• Power rating must be 0.063W (1/16W) minimum
• Composition must be thin film
• Operating temperature range must encompass -55°C ~ 155°C
• RoHS3 compliance required
• MSL rating must be 1 (Unlimited)

All identified substitute parts meet these core requirements. Tolerance and temperature coefficient may vary as improvements without affecting functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain Active product status with full RoHS3 compliance and MSL 1 rating, ensuring regulatory and environmental compatibility with the original RT0402FRE07267RL.

RT0402BRD07267RL and CPF0402B267RE1 offer improved tolerance (±0.1% versus ±1%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical package dimensions and power rating. Both are manufactured by established component suppliers with confirmed inventory availability.

ERA-2AEB2670X provides equivalent electrical performance with additional AEC-Q200 automotive qualification. The seated height is 0.016" (0.40mm) compared to 0.014" (0.35mm) for other options, which may require clearance verification in space-constrained applications.

Frequently Asked Questions (FAQ)

Q: Can RT0402BRD07267RL replace RT0402FRE07267RL directly?

A: Yes. Both parts share identical resistance (267 Ohms), power rating (0.063W), package (0402), and operating temperature range (-55°C ~ 155°C). RT0402BRD07267RL offers improved tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C) with no dimensional conflicts.

Q: What is the difference between the substitute parts?

A: RT0402BRD07267RL and CPF0402B267RE1 are functionally equivalent with ±0.1% tolerance and ±25ppm/°C temperature coefficient. ERA-2AEB2670X adds AEC-Q200 automotive qualification and has a maximum seated height of 0.016" (0.40mm) versus 0.014" (0.35mm) for the other substitutes.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All substitute parts carry ROHS3 compliance certification matching the original RT0402FRE07267RL.

Q: Does the height difference of ERA-2AEB2670X affect compatibility?

A: The ERA-2AEB2670X seated height is 0.016" (0.40mm) maximum, compared to 0.014" (0.35mm) for other options. Clearance verification is required for applications with tight vertical spacing constraints.

Q: Can these parts be used interchangeably in automated assembly?

A: Yes. All substitute parts are supplied in Tape & Reel packaging with identical 0402 (1005 Metric) package dimensions, compatible with standard pick-and-place equipment.