RT0402FRE07200KL Equivalent & Substitute Parts

Part Overview

The RT0402FRE07200KL is a 200 kOhms ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This moisture-resistant component is rated at 0.063W (1/16W) and operates across -55°C to 155°C. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1), making it suitable for general-purpose circuit applications requiring standard tolerance resistive elements. Equivalent and substitute parts are identified based on matching electrical specifications, package dimensions, and environmental ratings.

Substiute Parts

RT0402FRE07200KL

YAGEOIn Stock: 1012RT0402FRE07200KL Datasheet

Current PartRFQ

MCS04020C2003FE000

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 19497MCS04020C2003FE000 Datasheet

DirectRFQ

CPF0402B200KE1

TE Connectivity Passive ProductIn Stock: 338784CPF0402B200KE1 Datasheet

UpgradeRFQ

MCS04020D2003BE100

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 44198MCS04020D2003BE100 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0402FRE07200KL are categorized based on electrical and mechanical compatibility within the 0402 thin film resistor category. All substitutes maintain the 200 kOhms resistance value, 0.063W power rating, and 0402 package footprint. Substitution eligibility is determined by the following parameters:

• Resistance value: 200 kOhms (exact match required)
• Tolerance: ±1% or tighter (±0.1% acceptable as upgrade)
• Power rating: 0.063W minimum
• Package: 0402 (1005 Metric) with compatible termination count (2)
• Composition: Thin film technology
• Operating temperature range: Must encompass or match -55°C to 155°C minimum
• RoHS3 compliance and MSL 1 rating

Direct equivalents maintain ±1% tolerance. Upgrade substitutes offer improved tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), suitable for applications requiring higher precision.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Same Tolerance): MCS04020C2003FE000 from Vishay Beyschlag/Draloric/BC Components provides direct electrical equivalence with ±1% tolerance matching the RT0402FRE07200KL. This part maintains identical temperature coefficient (±50ppm/°C) and operating range (-55°C ~ 155°C). The anti-sulfur feature provides enhanced environmental protection. Both parts carry Active product status with full RoHS3 compliance and MSL 1 rating.

Upgrade Substitutes (Improved Tolerance): CPF0402B200KE1 (TE Connectivity) and MCS04020D2003BE100 (Vishay) offer ±0.1% tolerance with reduced temperature coefficient (±25ppm/°C), suitable for applications requiring higher precision than the original ±1% specification. Both maintain 0402 package compatibility and RoHS3 compliance. The TE Connectivity part supports the full -55°C ~ 155°C range, while the Vishay precision variant operates to -55°C ~ 125°C. Selection between upgrade options depends on maximum operating temperature requirements.

All substitute parts maintain Active product status, ROHS3 compliance, and MSL 1 rating, ensuring compatibility with standard manufacturing and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can MCS04020C2003FE000 be used as a direct replacement for RT0402FRE07200KL? A: Yes. Both parts share identical electrical specifications (200 kOhms ±1%, 0.063W), package dimensions (0402), composition (thin film), temperature coefficient (±50ppm/°C), and operating range (-55°C ~ 155°C). The primary difference is the anti-sulfur feature in the Vishay part, which provides additional environmental protection without affecting electrical performance.

Q: What is the difference between the standard tolerance and upgrade substitute parts? A: The upgrade substitutes (CPF0402B200KE1 and MCS04020D2003BE100) offer ±0.1% tolerance compared to ±1% in the original and direct equivalent. They also feature lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), resulting in improved stability across temperature variations. These upgrades are suitable for precision applications but are not required for general-purpose circuits.

Q: Are there height differences between substitute parts? A: The RT0402FRE07200KL and CPF0402B200KE1 have maximum seated height of 0.014" (0.35mm), while MCS04020C2003FE000 and MCS04020D2003BE100 have 0.015" (0.37mm). Both heights are within standard 0402 package specifications and compatible with typical PCB assembly processes. Verify height clearance if space constraints exist.

Q: Does MCS04020D2003BE100 have any temperature limitations? A: MCS04020D2003BE100 operates to -55°C ~ 125°C, which is 30°C lower than the original RT0402FRE07200KL (-55°C ~ 155°C). This part is suitable for applications not exceeding 125°C. For full temperature range coverage, use CPF0402B200KE1 or MCS04020C2003FE000.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitutes (MCS04020C2003FE000, CPF0402B200KE1, and MCS04020D2003BE100) carry ROHS3 compliance with MSL 1 rating, matching the original RT0402FRE07200KL. All parts are suitable for standard manufacturing and storage without special moisture handling requirements.