RT0402FRE071K07L Equivalent & Substitute Parts

Part Overview

The RT0402FRE071K07L is a 1.07 kOhms ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.063W (1/16W) power dissipation and operates across -55°C to 155°C. The component is ROHS3 compliant and carries MSL Level 1 rating, indicating unlimited moisture sensitivity protection. As an active product with established supply availability, equivalent and substitute parts are available from multiple manufacturers offering improved tolerance specifications and automotive-grade certifications.

Substiute Parts

RT0402FRE071K07L

YAGEOIn Stock: 1162RT0402FRE071K07L Datasheet

Current PartRFQ

RT0402BRD071K07L

YAGEOIn Stock: 15265RT0402BRD071K07L Datasheet

UpgradeRFQ

CPF0402B1K07E1

TE Connectivity Passive ProductIn Stock: 2710CPF0402B1K07E1 Datasheet

UpgradeRFQ

ERA-2AEB1071X

Panasonic Electronic ComponentsIn Stock: 12486ERA-2AEB1071X Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0402FRE071K07L is determined by the following mandatory parameters:

• Resistance Value: Must be 1.07 kOhms
• Package Type: Must be 0402 (1005 Metric)
• Composition: Must be Thin Film
• Power Rating: Must be 0.063W (1/16W) minimum
• Operating Temperature Range: Must cover -55°C to 155°C
• Termination Count: Must be 2 terminations
• RoHS Compliance: Must be ROHS3 compliant

All substitute parts listed meet these core requirements. Tolerance and temperature coefficient specifications may vary, representing either equivalent or upgraded performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

RT0402BRD071K07L (YAGEO): Direct upgrade from the main part within the same manufacturer series. Offers improved tolerance specification (±0.1% vs ±1%) and reduced temperature coefficient (±25ppm/°C vs ±50ppm/°C). Maintains identical package dimensions and power rating. ROHS3 compliant with MSL Level 1 rating.

CPF0402B1K07E1 (TE Connectivity): Cross-manufacturer substitute with equivalent electrical performance to RT0402BRD071K07L. Provides ±0.1% tolerance and ±25ppm/°C temperature coefficient. Identical package footprint and power specifications. ROHS3 compliant with MSL Level 1 rating.

ERA-2AEB1071X (Panasonic): Automotive-grade substitute carrying AEC-Q200 certification. Delivers ±0.1% tolerance and ±25ppm/°C temperature coefficient. Maximum seated height is 0.016" (0.40mm), compared to 0.014" (0.35mm) for other options. ROHS3 compliant with MSL Level 1 rating. Suitable for applications requiring automotive qualification.

Frequently Asked Questions (FAQ)

Q: Can RT0402BRD071K07L replace RT0402FRE071K07L directly?

A: Yes. Both parts share identical resistance value (1.07 kOhms), package (0402), power rating (0.063W), and operating temperature range (-55°C to 155°C). RT0402BRD071K07L provides improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C).

Q: What is the difference between the three substitute parts?

A: All three substitutes meet core electrical and mechanical requirements. RT0402BRD071K07L and CPF0402B1K07E1 are functionally equivalent with identical specifications. ERA-2AEB1071X adds AEC-Q200 automotive certification and has a maximum seated height of 0.016" (0.40mm) versus 0.014" (0.35mm) for the other options.

Q: Is the height difference of ERA-2AEB1071X significant?

A: The ERA-2AEB1071X maximum seated height is 0.016" (0.40mm) compared to 0.014" (0.35mm) for other parts. This 0.002" (0.05mm) difference may impact PCB layout in space-constrained applications. Verify clearance requirements before selection.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. RT0402BRD071K07L, CPF0402B1K07E1, and ERA-2AEB1071X are all ROHS3 compliant with MSL Level 1 rating.

Q: When should ERA-2AEB1071X be selected?

A: Select ERA-2AEB1071X when AEC-Q200 automotive qualification is required. This part is suitable for automotive and high-reliability applications requiring automotive-grade component certification.

Q: Do tolerance differences affect circuit performance?

A: Tolerance differences (±1% vs ±0.1%) affect circuit accuracy. Applications requiring tighter resistance tolerances should use substitute parts with ±0.1% specification. Temperature coefficient differences (±50ppm/°C vs ±25ppm/°C) affect performance stability across temperature ranges.