RT0402FRE07196RL Equivalent & Substitute Parts

Part Overview

The RT0402FRE07196RL is a 196 Ohm ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This surface mount resistor is rated for 0.063W (1/16W) power dissipation and operates across -55°C to 155°C. The part is Active status and ROHS3 compliant, making it suitable for general-purpose precision resistor applications in consumer and industrial electronics.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained while potentially improving tolerance specifications, temperature coefficients, or operational temperature ranges within the same package footprint.

Key Parameters

Parameter	Value
Resistance	196 Ohms
Tolerance	±1%
Power Rating	0.063W (1/16W)
Package	0402 (1005 Metric)
Composition	Thin Film
Temperature Coefficient	±50ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Requirements (No Deviation Allowed):

Resistance value: 196 Ohms
Package: 0402 (1005 Metric)
Composition: Thin Film
Terminations: 2
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Allowable Parameter Variations:

Tolerance: May be equal to or tighter (lower) than ±1%
Temperature Coefficient: May be equal to or lower than ±50ppm/°C
Operating Temperature Range: Must encompass or equal the original -55°C to 155°C range
Power Rating: Must be equal to or greater than 0.063W
Manufacturer: Different manufacturers permitted if all electrical and mechanical parameters align

All substitute parts listed meet these criteria and maintain full electrical and mechanical compatibility with the RT0402FRE07196RL.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Package	Height Max (mm)
RT0402FRE07196RL	YAGEO	196 Ω	±1%	0.063	±50	-55 to 155	0402	0.35
RT0402BRD07196RL	YAGEO	196 Ω	±0.1%	0.063	±25	-55 to 155	0402	0.35
CPF0402B196RE1	TE Connectivity	196 Ω	±0.1%	0.063	±25	-55 to 155	0402	0.35
ERA-2AEB1960X	Panasonic	196 Ω	±0.1%	0.063	±25	-55 to 155	0402	0.40
RN73C1E196RBTDF	TE Connectivity	196 Ω	±0.1%	0.063	±10	-55 to 155	0402	0.35
RR0510P-1960-D	Susumu	196 Ω	±0.5%	0.063	±25	-55 to 125	0402	0.40

Engineering Selection Recommendations

RT0402BRD07196RL (YAGEO): Direct upgrade from the main part within the same manufacturer series. Offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical package dimensions and operating temperature range. Recommended for applications requiring tighter tolerance specifications.

CPF0402B196RE1 (TE Connectivity): Equivalent electrical performance to RT0402BRD07196RL with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Maintains full compatibility across all mechanical and thermal parameters. Suitable for cross-manufacturer standardization.

ERA-2AEB1960X (Panasonic): Offers ±0.1% tolerance and ±25ppm/°C temperature coefficient with AEC-Q200 automotive qualification. Maximum seated height is 0.40mm (vs 0.35mm for other options). Specified for automotive-grade applications requiring enhanced reliability certifications.

RN73C1E196RBTDF (TE Connectivity): Provides the lowest temperature coefficient (±10ppm/°C) among all substitutes with ±0.1% tolerance. Maintains -55°C to 155°C operating range and 0.35mm maximum height. Optimal for precision analog circuits requiring superior temperature stability.

RR0510P-1960-D (Susumu): Maintains ±0.5% tolerance (between original ±1% and upgraded ±0.1% options) with ±25ppm/°C temperature coefficient. Operating temperature range limited to -55°C to 125°C. Suitable for applications not requiring the full 155°C upper temperature limit.

Frequently Asked Questions (FAQ)

Q: Can RT0402BRD07196RL replace RT0402FRE07196RL directly?

A: Yes. Both parts share identical 196 Ohm resistance, 0402 package, 0.063W power rating, and -55°C to 155°C operating range. RT0402BRD07196RL provides improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it a direct upgrade with no design modifications required.

Q: What is the difference between the substitute parts?

A: All substitutes maintain the core 196 Ohm, 0402 package specification. Primary differences are tolerance grades (±0.1%, ±0.5%), temperature coefficients (±10ppm/°C to ±25ppm/°C), and certifications. ERA-2AEB1960X includes AEC-Q200 automotive qualification. RR0510P-1960-D has a reduced upper operating temperature of 125°C.

Q: Are there height restrictions I should consider?

A: Most substitutes have 0.35mm maximum seated height, matching the original part. ERA-2AEB1960X and RR0510P-1960-D have 0.40mm maximum height. Verify PCB clearance requirements before selection if height is a constraint.

Q: Which substitute offers the best temperature stability?

A: RN73C1E196RBTDF provides the lowest temperature coefficient at ±10ppm/°C, compared to ±25ppm/°C for most other upgrades and ±50ppm/°C for the original part. This specification is relevant for precision analog applications sensitive to temperature drift.

Q: Can I use RR0510P-1960-D in applications requiring 155°C operation?

A: No. RR0510P-1960-D is rated only to 125°C maximum operating temperature. Use this part only in applications with maximum operating temperatures at or below 125°C. For full -55°C to 155°C range, select from RT0402BRD07196RL, CPF0402B196RE1, ERA-2AEB1960X, or RN73C1E196RBTDF.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the original RT0402FRE07196RL specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message