RT0402FRE07162KL Equivalent & Substitute Parts

Part Overview

The RT0402FRE07162KL is a 162 kOhms ±1% thin film chip resistor manufactured by YAGEO in the 0402 (1005 Metric) package format. This component is rated for 0.063W (1/16W) power dissipation and operates across the temperature range of -55°C to 155°C. The part maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified when applications require alternative sourcing due to inventory constraints, supply chain considerations, or specific performance requirements within the defined electrical and mechanical parameters.

Substiute Parts

RT0402FRE07162KL

YAGEOIn Stock: 10532RT0402FRE07162KL Datasheet

Current PartRFQ

MCS04020C1623FE000

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 10938MCS04020C1623FE000 Datasheet

DirectRFQ

RMCF0402FT162K

Stackpole Electronics IncIn Stock: 194078RMCF0402FT162K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0402FRE07162KL are qualified based on the following critical parameters that determine functional equivalence:

• Resistance value: 162 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.063W minimum (1/16W)
• Package format: 0402 (1005 Metric) (exact match required)
• Operating temperature range: -55°C to 155°C minimum (exact match or wider range acceptable)
• Number of terminations: 2 (exact match required)
• RoHS compliance: ROHS3 (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

The identified substitutes meet all mandatory electrical and mechanical parameters. Variations in composition (thin film versus thick film) and temperature coefficient are noted but do not preclude substitution when the primary functional requirements are satisfied.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and ROHS3 compliance, qualifying them for equivalent use in applications requiring 162 kOhms ±1% 0402 resistors. Selection between the main part and substitutes should be based on the following considerations:

The MCS04020C1623FE000 (Vishay Beyschlag) maintains identical electrical specifications to the RT0402FRE07162KL, including thin film composition and ±50ppm/°C temperature coefficient. The anti-sulfur feature provides enhanced environmental protection in corrosive atmospheres.

The RMCF0402FT162K (Stackpole Electronics) qualifies as a functional substitute with AEC-Q200 automotive qualification. The thick film composition and ±100ppm/°C temperature coefficient represent the primary technical differences. This part is suitable for applications where automotive-grade reliability is required or where thick film characteristics are acceptable.

Height variations (0.35mm to 0.40mm maximum seated height) are within typical PCB assembly tolerances for 0402 components and do not preclude interchangeability in standard surface mount applications.

Frequently Asked Questions (FAQ)

Q: Can the MCS04020C1623FE000 be used as a direct replacement for the RT0402FRE07162KL?

A: Yes. Both parts share identical resistance (162 kOhms), tolerance (±1%), power rating (0.063W), package format (0402), operating temperature range (-55°C to 155°C), and temperature coefficient (±50ppm/°C). The anti-sulfur feature of the Vishay part provides additional environmental protection without affecting electrical equivalence.

Q: What is the primary difference between the RMCF0402FT162K and the other two substitutes?

A: The RMCF0402FT162K uses thick film composition with a ±100ppm/°C temperature coefficient, compared to the thin film construction and ±50ppm/°C coefficient of the YAGEO and Vishay parts. The Stackpole part carries AEC-Q200 automotive qualification. These differences do not affect functional substitution for the specified 162 kOhms ±1% requirement.

Q: Are there height differences that affect PCB assembly compatibility?

A: Maximum seated heights range from 0.35mm (YAGEO) to 0.40mm (Stackpole). These variations fall within standard PCB assembly tolerances for 0402 components and do not create compatibility issues in typical surface mount applications.

Q: Do all substitute parts meet the same compliance requirements?

A: Yes. All three parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and maintain Active product status. REACH status is Unaffected for all parts.

Q: Which substitute should be selected for automotive applications?

A: The RMCF0402FT162K carries AEC-Q200 automotive qualification and is the appropriate selection for automotive-grade reliability requirements. The other substitutes are suitable for general industrial and commercial applications.