RT0402FRE07133RL Equivalent & Substitute Parts

Part Overview

The RT0402FRE07133RL is a 133 Ohms ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.063W (1/16W) power dissipation and operates across -55°C to 155°C. The part is ROHS3 compliant and carries MSL 1 (Unlimited) moisture sensitivity rating. As an active product with established supply availability, equivalent and substitute parts are available from multiple manufacturers offering improved tolerance specifications and automotive-grade certifications.

Substiute Parts

RT0402FRE07133RL

YAGEOIn Stock: 916RT0402FRE07133RL Datasheet

Current PartRFQ

RT0402BRD07133RL

YAGEOIn Stock: 23441RT0402BRD07133RL Datasheet

UpgradeRFQ

CPF0402B133RE1

TE Connectivity Passive ProductIn Stock: 2099CPF0402B133RE1 Datasheet

UpgradeRFQ

ERA-2AEB1330X

Panasonic Electronic ComponentsIn Stock: 19267ERA-2AEB1330X Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RT0402FRE07133RL is determined by strict equivalence in the following parameters: resistance value (133 Ohms), package type (0402/1005 Metric), power rating (0.063W/1/16W), composition (thin film), operating temperature range (-55°C to 155°C), and termination count (2).

The substitute parts listed maintain these core electrical and mechanical specifications. Tolerance improvements from ±1% to ±0.1% and temperature coefficient reductions from ±50ppm/°C to ±25ppm/°C represent performance enhancements rather than substitution barriers. The ERA-2AEB1330X additionally carries AEC-Q200 automotive qualification, which extends application scope without compromising standard industrial use cases.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and ROHS3 compliance. Selection between RT0402BRD07133RL and CPF0402B133RE1 depends on manufacturer preference and supply chain strategy, as both offer identical electrical specifications with ±0.1% tolerance and ±25ppm/°C temperature coefficient.

The ERA-2AEB1330X is suitable for applications requiring automotive-grade components under AEC-Q200 qualification. This part carries a maximum seated height of 0.016" (0.40mm) compared to 0.014" (0.35mm) for other variants; verify PCB assembly clearance before selection.

Frequently Asked Questions (FAQ)

Q: Can RT0402BRD07133RL directly replace RT0402FRE07133RL? A: Yes. Both parts share identical resistance (133 Ohms), package (0402), power rating (0.063W), and operating temperature range (-55°C to 155°C). The substitute offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C).

Q: What is the difference between standard and AEC-Q200 variants? A: The ERA-2AEB1330X carries AEC-Q200 automotive qualification. All electrical and mechanical parameters remain equivalent to standard variants. AEC-Q200 certification indicates compliance with automotive reliability and quality standards.

Q: Are there package or footprint differences between these parts? A: All parts use 0402 (1005 Metric) package with 2 terminations. The ERA-2AEB1330X has a maximum seated height of 0.016" (0.40mm) versus 0.014" (0.35mm) for other variants. Verify PCB design clearance specifications.

Q: Which substitute offers the best tolerance specification? A: RT0402BRD07133RL, CPF0402B133RE1, and ERA-2AEB1330X all provide ±0.1% tolerance, compared to ±1% for the original RT0402FRE07133RL.

Q: Are all parts ROHS3 compliant? A: Yes. All listed parts carry ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating.