Equivalent & Substitute Parts for RT0402FRE07113RL

Part Overview

The RT0402FRE07113RL is a 113 Ohms ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.063W (1/16W) power dissipation and operates across -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. As an active product with established supply availability, substitute parts are identified to support design flexibility, inventory optimization, and application-specific requirements such as enhanced tolerance or automotive qualification.

Substiute Parts

RT0402FRE07113RL

YAGEOIn Stock: 1136RT0402FRE07113RL Datasheet

Current PartRFQ

RT0402BRD07113RL

YAGEOIn Stock: 9358RT0402BRD07113RL Datasheet

UpgradeRFQ

CPF0402B113RE1

TE Connectivity Passive ProductIn Stock: 1709CPF0402B113RE1 Datasheet

UpgradeRFQ

ERA-2AEB1130X

Panasonic Electronic ComponentsIn Stock: 14496ERA-2AEB1130X Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0402FRE07113RL is determined by the following mandatory parameters:

• Resistance value: 113 Ohms (exact match required)
• Package type: 0402 (1005 Metric) (exact match required)
• Power rating: 0.063W minimum (equal or greater acceptable)
• Composition: Thin Film (exact match required)
• Operating temperature range: -55°C to 155°C minimum (equal or wider acceptable)
• RoHS compliance: ROHS3 Compliant (required)
• Moisture sensitivity: MSL 1 or better (required)

Tolerance and temperature coefficient are secondary parameters that may vary between substitutes. Enhanced tolerance (±0.1% vs. ±1%) and improved temperature coefficient (±25ppm/°C vs. ±50ppm/°C) represent performance upgrades. Automotive qualification (AEC-Q200) is an additional feature available in specific substitutes.

Parameter Comparison

Engineering Selection Recommendations

All four parts meet the core substitution criteria for 113 Ohms ±1% thin film resistors in 0402 package with identical power ratings and operating temperature ranges.

RT0402BRD07113RL and CPF0402B113RE1 offer enhanced tolerance (±0.1%) and improved temperature coefficient (±25ppm/°C) compared to the original RT0402FRE07113RL. These upgrades provide superior stability in precision analog circuits and temperature-sensitive applications. Both parts maintain ROHS3 compliance and MSL Level 1 rating.

ERA-2AEB1130X provides the same tolerance and temperature coefficient improvements as the YAGEO and TE Connectivity alternatives, with the additional qualification of AEC-Q200 automotive standard. This part is suitable for automotive and high-reliability applications requiring formal automotive component certification. The seated height is 0.016" (0.40mm) compared to 0.014" (0.35mm) for other substitutes; this difference must be evaluated for PCB layout constraints.

Selection between YAGEO RT0402BRD07113RL and TE Connectivity CPF0402B113RE1 depends on supply chain preference and inventory availability, as both offer identical electrical specifications and compliance status. The Panasonic ERA-2AEB1130X is the appropriate choice for designs requiring automotive qualification or when AEC-Q200 certification is a contractual requirement.

Frequently Asked Questions (FAQ)

Q: Can RT0402BRD07113RL replace RT0402FRE07113RL in existing designs?

A: Yes. Both parts share identical resistance (113 Ohms), package (0402), power rating (0.063W), composition (thin film), and operating temperature range (-55°C to 155°C). RT0402BRD07113RL provides enhanced tolerance (±0.1% vs. ±1%) and improved temperature coefficient (±25ppm/°C vs. ±50ppm/°C), making it a direct upgrade with no design modifications required.

Q: What is the difference between the YAGEO and TE Connectivity 0.1% tolerance parts?

A: RT0402BRD07113RL (YAGEO) and CPF0402B113RE1 (TE Connectivity) are electrically equivalent. Both deliver 113 Ohms ±0.1% with ±25ppm/°C temperature coefficient, identical package dimensions, and ROHS3 compliance. Selection is based on supply availability and procurement preference.

Q: When should ERA-2AEB1130X be selected over other substitutes?

A: ERA-2AEB1130X is specified when AEC-Q200 automotive qualification is required by design standards or customer specifications. The part delivers the same electrical performance (113 Ohms ±0.1%, ±25ppm/°C) as other 0.1% tolerance substitutes. Note that seated height is 0.016" (0.40mm) versus 0.014" (0.35mm) for other options; verify PCB layout clearance before selection.

Q: Are all substitutes ROHS3 compliant?

A: Yes. RT0402FRE07113RL, RT0402BRD07113RL, CPF0402B113RE1, and ERA-2AEB1130X are all ROHS3 compliant with MSL Level 1 (Unlimited) moisture sensitivity rating.

Q: What does ±1% tolerance mean compared to ±0.1%?

A: Tolerance defines the acceptable resistance variation from the nominal 113 Ohm value. ±1% tolerance allows variation between 111.87 Ohms and 114.13 Ohms. ±0.1% tolerance restricts variation to 112.887 Ohms and 113.113 Ohms. Enhanced tolerance is beneficial in precision measurement circuits, reference networks, and applications with tight gain or frequency specifications.

Q: Can the original RT0402FRE07113RL be used if ±0.1% tolerance parts are unavailable?

A: Yes, if circuit design tolerances permit ±1% resistance variation. The RT0402FRE07113RL meets all core substitution parameters. However, if the application requires tighter tolerance control, substitute parts with ±0.1% specification must be sourced.