RT0402FRE07110RL Equivalent & Substitute Parts

Part Overview

The RT0402FRE07110RL is a 110 Ohm ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This surface mount resistor is rated for 0.063W (1/16W) power dissipation and operates across -55°C to 155°C. The part is active, RoHS3 compliant, and available in Tape & Reel packaging with 2511 units in stock.

Substitute parts are identified when equivalent resistance values, package dimensions, power ratings, and operating temperature ranges align with the main part specifications, while allowing for tolerance and temperature coefficient variations within acceptable engineering parameters.

Key Parameters

Parameter	Value
Resistance	110 Ohms
Tolerance	±1%
Power Rating	0.063W (1/16W)
Package	0402 (1005 Metric)
Composition	Thin Film
Operating Temperature	-55°C to 155°C
Temperature Coefficient	±50ppm/°C
RoHS Status	RoHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Parameters (Must Match):

Resistance value: 110 Ohms
Package type: 0402 (1005 Metric)
Composition: Thin Film
Power rating: 0.063W (1/16W)
Operating temperature range: -55°C minimum and 155°C maximum (or higher)
RoHS3 compliance
MSL rating: 1 (Unlimited)

Allowable Variations:

Tolerance: ±1% or tighter (±0.1%, ±0.5%)
Temperature coefficient: ±50ppm/°C or better (±25ppm/°C)
Packaging format: Tape & Reel or Cut Tape variants
Manufacturer: Different manufacturers acceptable if all parameters align
Additional certifications: AEC-Q200 automotive qualification acceptable as upgrade feature

All six substitute parts meet these criteria and are direct functional equivalents for the RT0402FRE07110RL.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Package	Height Max (mm)	RoHS3	AEC-Q200
RT0402FRE07110RL	YAGEO	110 Ω	±1%	0.063	±50	-55 to 155	0402	0.35	Yes	No
RT0402BRD07110RL	YAGEO	110 Ω	±0.1%	0.063	±25	-55 to 155	0402	0.35	Yes	No
CPF0402B110RE1	TE Connectivity	110 Ω	±0.1%	0.063	±25	-55 to 155	0402	0.35	Yes	No
ERA-2AEB111X	Panasonic	110 Ω	±0.1%	0.063	±25	-55 to 155	0402	0.40	Yes	Yes
ERA-2AED111X	Panasonic	110 Ω	±0.5%	0.063	±25	-55 to 155	0402	0.40	Yes	Yes
RG1005P-111-B-T5	Susumu	110 Ω	±0.1%	0.063	±25	-55 to 155	0402	0.40	Yes	Yes
RR0510P-111-D	Susumu	110 Ω	±0.5%	0.063	±25	-55 to 125	0402	0.40	Yes	No

Engineering Selection Recommendations

Direct Equivalent (Standard Applications): RT0402BRD07110RL (YAGEO) provides the same manufacturer continuity with improved tolerance (±0.1% vs ±1%) and better temperature coefficient (±25ppm/°C vs ±50ppm/°C). This part is available in higher quantity (37,794 units) and is suitable for general-purpose circuit applications.

Automotive-Qualified Alternatives: ERA-2AEB111X (Panasonic) and RG1005P-111-B-T5 (Susumu) both carry AEC-Q200 automotive qualification. These parts are specified for applications requiring automotive-grade reliability and environmental stress screening. ERA-2AEB111X offers ±0.1% tolerance; RG1005P-111-B-T5 adds anti-sulfur protection for enhanced corrosion resistance in harsh environments.

Relaxed Tolerance Options: ERA-2AED111X (Panasonic) and RR0510P-111-D (Susumu) provide ±0.5% tolerance with AEC-Q200 qualification (ERA-2AED111X) or standard industrial compliance (RR0510P-111-D). These are suitable when circuit design permits wider tolerance margins.

Temperature Range Consideration: RR0510P-111-D operates to 125°C maximum, which is 30°C below the main part and other substitutes. This part is suitable only for applications with maximum operating temperature not exceeding 125°C.

All substitute parts maintain RoHS3 compliance and MSL 1 rating, ensuring compatibility with standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can RT0402BRD07110RL replace RT0402FRE07110RL in any circuit? A: Yes. RT0402BRD07110RL is a direct functional equivalent with identical resistance, power rating, package, and operating temperature range. The tighter tolerance (±0.1% vs ±1%) and improved temperature coefficient (±25ppm/°C vs ±50ppm/°C) make it suitable for all applications where the original part is specified.

Q: What is the difference between standard and AEC-Q200 qualified parts? A: AEC-Q200 qualification indicates the part has undergone automotive-grade reliability testing and environmental stress screening per automotive industry standards. Parts like ERA-2AEB111X and RG1005P-111-B-T5 carry this certification. Use AEC-Q200 parts for automotive, aerospace, or mission-critical applications requiring documented reliability assurance.

Q: Are there height differences between substitute parts? A: Yes. The main part RT0402FRE07110RL and YAGEO RT0402BRD07110RL have maximum seated height of 0.35mm. Panasonic ERA-2A series and Susumu RG/RR series have maximum seated height of 0.40mm. This 0.05mm difference is typically acceptable for standard PCB designs but should be verified if height-constrained applications are involved.

Q: Can I use RR0510P-111-D if my circuit operates at 150°C? A: No. RR0510P-111-D is rated only to 125°C maximum operating temperature. For applications requiring operation above 125°C, use RT0402FRE07110RL, RT0402BRD07110RL, CPF0402B110RE1, ERA-2AEB111X, ERA-2AED111X, or RG1005P-111-B-T5, all of which support -55°C to 155°C.

Q: What does ±50ppm/°C temperature coefficient mean compared to ±25ppm/°C? A: Temperature coefficient indicates resistance value drift per degree Celsius change. The main part RT0402FRE07110RL has ±50ppm/°C, meaning resistance can shift by up to 50 parts per million per °C. Substitute parts with ±25ppm/°C have half this drift rate, providing better stability across temperature extremes. For precision analog circuits, the tighter coefficient is advantageous.

Q: Is CPF0402B110RE1 from TE Connectivity compatible with YAGEO designs? A: Yes. CPF0402B110RE1 matches all critical parameters: 110 Ohm resistance, ±0.1% tolerance, 0.063W power rating, 0402 package, and -55°C to 155°C operating range. It is a cross-manufacturer substitute suitable for applications where component sourcing flexibility is required.

Q: What does anti-sulfur protection in RG1005P-111-B-T5 provide? A: Anti-sulfur protection prevents corrosion of component terminations and internal elements when exposed to sulfur-containing environments (industrial, marine, or high-pollution areas). This feature extends component reliability in harsh environmental conditions beyond standard thin film resistor specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message