RSMF3JB62K0 Equivalent & Substitute Parts

Part Overview

The RSMF3JB62K0 is a 62 kOhms ±5% 3W through hole resistor manufactured by Stackpole Electronics Inc. This axial metal oxide film resistor features flame proof and safety characteristics, designed for applications requiring reliable power dissipation in the 3-watt range. The part is currently active in production with ROHS3 compliance and REACH unaffected status. Substitute parts are identified when packaging or supply chain requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

RSMF3JB62K0

Stackpole Electronics IncIn Stock: 1107RSMF3JB62K0 Datasheet

Current PartRFQ

RSMF3JT62K0

Stackpole Electronics IncIn Stock: 2163RSMF3JT62K0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RSMF3JB62K0 and RSMF3JT62K0 are direct substitutes based on identical electrical and mechanical parameters. Both parts share the same resistance value (62 kOhms), tolerance (±5%), power rating (3W), composition (metal oxide film), axial package configuration, temperature coefficient (±200ppm/°C), operating temperature range (-55°C to 235°C), and physical dimensions (0.217" Dia x 0.591" L). The substitution is valid across all electrical and thermal performance criteria. The only difference between these parts is packaging format: RSMF3JB62K0 is supplied in bulk packaging, while RSMF3JT62K0 is supplied in cut tape format.

Parameter Comparison

Engineering Selection Recommendations

Both RSMF3JB62K0 and RSMF3JT62K0 are active production parts with identical electrical performance and mechanical compatibility. Selection between these parts should be based on packaging requirements and assembly process specifications. The bulk packaging format (RSMF3JB62K0) is suitable for manual assembly or applications with flexible component handling. The cut tape format (RSMF3JT62K0) is optimized for automated pick-and-place assembly systems. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for end-use applications.

Frequently Asked Questions (FAQ)

Q: Can RSMF3JT62K0 be used as a direct replacement for RSMF3JB62K0?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (bulk versus cut tape). Substitution is valid for all circuit applications where the RSMF3JB62K0 is specified.

Q: What is the difference between bulk and cut tape packaging?

A: Bulk packaging (RSMF3JB62K0) supplies components in loose form, suitable for manual handling and assembly. Cut tape packaging (RSMF3JT62K0) supplies components on continuous tape with individual component spacing, optimized for automated assembly equipment.

Q: Are there any performance differences between these substitute parts?

A: No. Both parts have identical resistance (62 kOhms), tolerance (±5%), power rating (3W), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C to 235°C). Electrical and thermal performance is equivalent.

Q: Do both parts meet the same compliance standards?

A: Yes. Both RSMF3JB62K0 and RSMF3JT62K0 are ROHS3 compliant and REACH unaffected, meeting the same regulatory requirements.

Q: Which part should I select for automated assembly?

A: RSMF3JT62K0 in cut tape format is designed for automated pick-and-place assembly systems. RSMF3JB62K0 in bulk format is suitable for manual assembly processes.