RSMF2JB36K0 Equivalent & Substitute Parts

Part Overview

The RSMF2JB36K0 is a 36 kOhms ±5% 2W through hole resistor manufactured by Stackpole Electronics Inc. This axial metal oxide film resistor features flame proof and safety characteristics, designed for applications requiring reliable performance across industrial temperature ranges. The part is Active status and ROHS3 compliant. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility for equivalent circuit performance.

Substiute Parts

RSMF2JB36K0

Stackpole Electronics IncIn Stock: 1065RSMF2JB36K0 Datasheet

Current PartRFQ

RSF2JT36K0

Stackpole Electronics IncIn Stock: 6455RSF2JT36K0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RSMF2JB36K0 is determined by the following critical parameters:

• Resistance value: 36 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 2W (exact match required)
• Composition: Metal Oxide Film (exact match required)
• Package type: Axial (exact match required)
• Temperature coefficient: ±200ppm/°C (exact match required)
• Operating temperature range: -55°C to 235°C (exact match required)
• Compliance: ROHS3 Compliant (exact match required)

The RSF2JT36K0 meets all substitution criteria. Both parts share identical electrical specifications and thermal characteristics. The primary difference is packaging format (Bulk versus Cut Tape) and physical dimensions, which do not affect electrical performance or circuit compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both RSMF2JB36K0 and RSF2JT36K0 are Active status components from Stackpole Electronics Inc with identical electrical and thermal specifications. Selection between these parts should be based on:

• Packaging requirements: RSMF2JB36K0 is supplied in Bulk packaging; RSF2JT36K0 is supplied in Cut Tape format
• Physical dimensions: RSMF2JB36K0 measures 0.177" Dia x 0.433" L (4.50mm x 11.00mm); RSF2JT36K0 measures 0.217" Dia x 0.591" L (5.50mm x 15.00mm)
• Inventory availability and procurement lead times
• Assembly process compatibility with packaging format

Both parts maintain full compliance with ROHS3, REACH, and EAR99 classifications.

Frequently Asked Questions (FAQ)

Q: Can RSF2JT36K0 be used as a direct replacement for RSMF2JB36K0 in circuit applications?

A: Yes. Both parts have identical electrical specifications (36 kOhms ±5%, 2W, ±200ppm/°C, -55°C to 235°C operating range) and metal oxide film composition. Electrical performance and circuit behavior are equivalent.

Q: What is the difference between these two part numbers?

A: The primary differences are packaging format (Bulk versus Cut Tape) and physical dimensions. RSMF2JB36K0 is smaller (4.50mm x 11.00mm) compared to RSF2JT36K0 (5.50mm x 15.00mm). These differences do not affect electrical function.

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified as EAR99. Regulatory status is identical.

Q: Which part should I select for new designs?

A: Selection depends on packaging requirements and board layout constraints. Verify that the physical dimensions of your chosen part accommodate your PCB layout and assembly process.

Q: Can these parts be used interchangeably in existing assemblies?

A: Electrical interchangeability is confirmed. Physical interchangeability depends on PCB footprint design and available component mounting space. Verify dimensional compatibility with your specific assembly.