RS1JL RVG Equivalent & Substitute Parts

Part Overview

The RS1JL RVG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 600 V DC reverse voltage and 800 mA average rectified current. This surface mount component features fast recovery characteristics with a reverse recovery time of 250 ns and is packaged in the DO-219AB (Sub SMA) form factor. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part number becomes unavailable or when alternative electrical characteristics better suit specific application requirements.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	600	V
Current - Average Rectified (Io)	800	mA
Voltage - Forward (Vf) (Max) @ If	1.3 V @ 800 mA	V
Reverse Recovery Time (trr)	250	ns
Current - Reverse Leakage @ Vr	5	µA @ 600 V
Speed Classification	Fast Recovery ≤ 500ns, > 200mA (Io)	-
Package / Case	DO-219AB	-
Mounting Type	Surface Mount	-
Operating Temperature - Junction	-55 to 150	°C
RoHS Status	ROHS3 Compliant	-

Substitute Part Grouping Explanation

Substitute parts for the RS1JL RVG are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalent: RS1JL R3G is a direct parametric equivalent manufactured by Taiwan Semiconductor Corporation. This part maintains identical electrical specifications across all critical parameters including 600 V reverse voltage rating, 800 mA average rectified current, 1.3 V forward voltage drop at 800 mA, 250 ns reverse recovery time, and 5 µA reverse leakage current. The part shares the same DO-219AB package, surface mount mounting type, operating temperature range, and compliance certifications. This classification indicates the part can be used as a direct replacement without circuit redesign.

Similar Manufacturer Parts: VS-1EFU06-M3/I, VS-1EFU06HM3/I, and VS-2EFU06HM3/I are manufactured by Vishay General Semiconductor - Diodes Division and share the same 600 V reverse voltage rating and DO-219AB package. These parts differ in average rectified current ratings (1 A or 2 A versus 800 mA) and reverse recovery time characteristics (32 ns or 55 ns versus 250 ns). These parts are suitable for applications where higher current capacity or faster switching performance is required, provided the circuit design accommodates the different electrical characteristics.

Key Parameters Determining Substitution:

Voltage - DC Reverse (Vr) (Max): 600 V (required match)
Package / Case: DO-219AB (required match)
Mounting Type: Surface Mount (required match)
Current - Average Rectified (Io): 800 mA minimum (equal or higher acceptable)
Reverse Recovery Time (trr): ≤ 500 ns (fast recovery classification)
RoHS Status: ROHS3 Compliant (required match)

Parameter Comparison

Parameter	RS1JL RVG	RS1JL R3G	VS-1EFU06-M3/I	VS-1EFU06HM3/I	VS-2EFU06HM3/I
Manufacturer	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation	Vishay General Semiconductor	Vishay General Semiconductor	Vishay General Semiconductor
Voltage - DC Reverse (Vr) (Max)	600 V	600 V	600 V	600 V	600 V
Current - Average Rectified (Io)	800 mA	800 mA	1 A	1 A	2 A
Voltage - Forward (Vf) (Max) @ If	1.3 V @ 800 mA	1.3 V @ 800 mA	1.2 V @ 1 A	1.2 V @ 1 A	1.35 V @ 2 A
Reverse Recovery Time (trr)	250 ns	250 ns	32 ns	32 ns	55 ns
Current - Reverse Leakage @ Vr	5 µA @ 600 V	5 µA @ 600 V	3 µA @ 600 V	3 µA @ 600 V	3 µA @ 600 V
Speed Classification	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA
Package / Case	DO-219AB	DO-219AB	DO-219AB	DO-219AB	DO-219AB
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Operating Temperature - Junction	-55 to 150°C	-55 to 150°C	-55 to 175°C	-55 to 175°C	-55 to 175°C
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected
Product Status	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Direct Replacement (Parametric Equivalent): RS1JL R3G is the recommended direct replacement for RS1JL RVG. Both parts are manufactured by Taiwan Semiconductor Corporation and maintain identical electrical specifications, package configuration, and compliance certifications. Selection of RS1JL R3G requires no circuit modifications and provides equivalent performance across all operating conditions within the specified temperature range of -55°C to 150°C.

Alternative Selection (Similar Manufacturer Parts): Vishay General Semiconductor FRED Pt® series diodes (VS-1EFU06-M3/I, VS-1EFU06HM3/I, and VS-2EFU06HM3/I) are suitable alternatives when higher current capacity or improved switching performance is required. These parts maintain the 600 V reverse voltage rating and DO-219AB package compatibility. The extended operating temperature range to 175°C provides additional thermal margin in high-temperature applications. VS-1EFU06HM3/I carries AEC-Q101 automotive qualification, suitable for automotive and industrial applications requiring enhanced reliability standards. VS-2EFU06HM3/I provides 2 A current capacity with 55 ns reverse recovery time, appropriate for higher-power rectification circuits.

Compliance Considerations: All substitute parts maintain ROHS3 compliance, REACH unaffected status, and unlimited moisture sensitivity rating (MSL 1), ensuring compatibility with current manufacturing and environmental regulations. All parts are classified as active products with established supply chains.

Frequently Asked Questions (FAQ)

Q: Can RS1JL R3G be used as a direct replacement for RS1JL RVG? A: Yes. RS1JL R3G is a parametric equivalent with identical electrical specifications, package type, and operating characteristics. No circuit modifications are required.

Q: What is the primary difference between the Taiwan Semiconductor Corporation parts and the Vishay FRED Pt® series? A: The Taiwan Semiconductor Corporation RS1JL series maintains 250 ns reverse recovery time, while Vishay FRED Pt® series offers faster switching with 32 ns (1 A rating) or 55 ns (2 A rating) reverse recovery time. Vishay parts also provide higher current ratings and extended temperature range to 175°C.

Q: Are the Vishay VS-1EFU06HM3/I and VS-1EFU06-M3/I interchangeable? A: Both parts share identical electrical specifications and package configuration. VS-1EFU06HM3/I carries AEC-Q101 automotive qualification, while VS-1EFU06-M3/I does not. Selection depends on application requirements for automotive-grade certification.

Q: Can VS-2EFU06HM3/I replace RS1JL RVG in all applications? A: VS-2EFU06HM3/I is mechanically and electrically compatible at the package level, with 600 V reverse voltage rating and DO-219AB package. However, the 2 A current rating and 55 ns reverse recovery time differ from the 800 mA and 250 ns specifications of RS1JL RVG. Substitution is appropriate for applications where higher current capacity is beneficial or required.

Q: What does the DO-219AB package designation mean? A: DO-219AB is the standardized package designation for surface mount rectifier diodes in the Sub SMA form factor. All listed parts use this identical package, ensuring mechanical compatibility and PCB footprint interchangeability.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All parts listed maintain ROHS3 compliance and REACH unaffected status, meeting current environmental and regulatory requirements for electronic component manufacturing and use.

Q: What is the significance of the MSL 1 (Unlimited) moisture sensitivity rating? A: MSL 1 indicates the lowest moisture sensitivity level, meaning the component can be stored indefinitely without special moisture control measures. All listed parts share this rating, eliminating moisture-related handling concerns during procurement and assembly.

Q: Can these diodes be used in automotive applications? A: VS-1EFU06HM3/I and VS-2EFU06HM3/I carry AEC-Q101 automotive qualification. RS1JL RVG and RS1JL R3G do not carry automotive qualification but are suitable for industrial and commercial applications within their specified operating temperature range.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message