RS01A600R0FS70 Equivalent & Substitute Parts

Part Overview

The RS01A600R0FS70 is a 600 Ohm, 1W wirewound axial resistor manufactured by Vishay Dale. This through-hole component is designed for applications requiring precision resistance with moisture resistance and stable performance across extended temperature ranges. The part maintains Active product status with 723 units currently in stock. Equivalent parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

RS01A600R0FS70

Vishay DaleIn Stock: 754RS01A600R0FS70 Datasheet

Current PartRFQ

41F600

OhmiteIn Stock: 99641F600 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RS01A600R0FS70 is determined by the following critical parameters:

• Resistance value: 600 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 1W (exact match required)
• Composition: Wirewound (exact match required)
• Package: Axial through-hole (exact match required)
• Temperature coefficient: ±20ppm/°C (exact match required)
• Number of terminations: 2 (exact match required)

The substitute part 41F600 (Ohmite) meets all critical electrical and mechanical parameters. Physical dimensions vary within acceptable tolerances for axial through-hole mounting applications. Both parts are RoHS non-compliant and share identical ECCN and HTSUS classifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RS01A600R0FS70 and 41F600 are Active products with identical electrical specifications and regulatory classifications. Selection between these parts should be based on:

• Packaging format requirements: RS01A600R0FS70 is supplied in Tape & Reel format; 41F600 is supplied in Bulk format
• Inventory availability: RS01A600R0FS70 has 723 units in stock; 41F600 has 941 units in stock
• Physical dimensions: RS01A600R0FS70 measures 0.094" Dia × 0.406" L; 41F600 measures 0.126" Dia × 0.437" L
• Supplier and lead time considerations

Both parts are RoHS non-compliant and REACH Affected, requiring equivalent compliance documentation for applications subject to these regulations.

Frequently Asked Questions (FAQ)

Q: Can 41F600 be used as a direct replacement for RS01A600R0FS70?

A: Yes. Both parts share identical electrical parameters (600 Ohms, ±1%, 1W, ±20ppm/°C) and wirewound axial construction. Physical dimension differences are within acceptable tolerances for standard through-hole PCB applications.

Q: What are the key differences between these parts?

A: The primary differences are packaging format (Tape & Reel vs. Bulk) and physical dimensions. RS01A600R0FS70 is slightly smaller (0.094" Dia × 0.406" L) compared to 41F600 (0.126" Dia × 0.437" L). Both maintain identical electrical performance and temperature stability.

Q: Are there any compliance considerations when substituting?

A: Both parts are RoHS non-compliant and REACH Affected. No compliance advantage exists between the two options. Applications requiring RoHS compliance require alternative component selection outside this substitution group.

Q: How do packaging formats affect component selection?

A: Tape & Reel packaging (RS01A600R0FS70) is optimized for automated assembly processes. Bulk packaging (41F600) is suitable for manual assembly or lower-volume applications. PCB footprint and mounting requirements remain identical.

Q: What is the operating temperature range for both parts?

A: RS01A600R0FS70 operates from -65°C to 250°C. Operating temperature range for 41F600 is not specified in available documentation. Both maintain ±20ppm/°C temperature coefficient stability.