RS010560R0FS73 Equivalent & Substitute Parts

Part Overview

The RS010560R0FS73 is a 560 Ohm, 10W wirewound axial resistor manufactured by Vishay Dale with ±1% tolerance and moisture-resistant construction. This component is designed for through-hole applications requiring precision power dissipation in industrial and high-reliability circuits. The part maintains active product status with 682 units currently in stock. Substitute parts are identified to address packaging format availability and compliance requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RS010560R0FS73

Vishay DaleIn Stock: 729RS010560R0FS73 Datasheet

Current PartRFQ

RS010560R0FE73

Vishay DaleIn Stock: 1592RS010560R0FE73 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RS010560R0FS73 is determined by strict equivalence across the following critical parameters:

• Resistance value: 560 Ohms
• Power rating: 10W
• Tolerance: ±1%
• Composition: Wirewound
• Package configuration: Axial through-hole
• Temperature coefficient: ±20ppm/°C
• Operating temperature range: -65°C to 250°C
• Physical dimensions: 0.375" Dia × 1.780" L
• Moisture resistance feature

The primary distinction between the main part and its substitute relates to packaging format (Tape & Reel versus Cut Tape) and regulatory compliance status. Both parts share identical electrical performance and mechanical form factor, enabling direct substitution in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both RS010560R0FS73 and RS010560R0FE73 are functionally equivalent for circuit applications requiring 560 Ohm, 10W wirewound resistors with ±1% tolerance and moisture-resistant construction. Selection between these parts should be based on the following criteria:

RS010560R0FS73 (Tape & Reel): Suitable for high-volume automated assembly processes where components are supplied in continuous tape format. Current inventory of 682 units supports medium-scale production runs.

RS010560R0FE73 (Cut Tape): Appropriate for manual assembly, prototyping, or lower-volume applications where individual component handling is required. Higher inventory availability (1575 units) provides greater supply flexibility. This variant achieves ROHS3 compliance and REACH unaffected status, meeting stricter regulatory requirements for applications subject to European environmental directives.

Selection should account for assembly methodology, regulatory compliance obligations, and supply chain requirements rather than electrical performance, as both parts deliver identical functional characteristics.

Frequently Asked Questions (FAQ)

Q: Can RS010560R0FE73 be used as a direct replacement for RS010560R0FS73 in existing designs?

A: Yes. Both parts are electrically and mechanically identical, differing only in packaging format (Cut Tape versus Tape & Reel) and regulatory compliance status. Direct substitution is valid for circuit applications.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components in continuous tape format on reels, optimized for automated pick-and-place assembly equipment. Cut Tape (CT) packaging provides individual components or small quantities cut from tape, suitable for manual assembly or low-volume applications.

Q: Does the packaging format affect electrical performance?

A: No. Packaging format is a supply and assembly consideration only. Both formats contain identical components with equivalent electrical specifications, tolerance, temperature coefficient, and operating range.

Q: What compliance differences exist between these parts?

A: RS010560R0FS73 is RoHS non-compliant and REACH Affected. RS010560R0FE73 is ROHS3 Compliant and REACH Unaffected. Applications subject to European environmental regulations or customer compliance requirements should specify RS010560R0FE73.

Q: Are the physical dimensions identical?

A: Yes. Both parts share identical axial package dimensions of 0.375" diameter by 1.780" length (9.53mm × 45.21mm), ensuring compatibility with existing PCB layouts and mechanical assemblies.

Q: Which part should be selected for new designs?

A: RS010560R0FE73 is recommended for new designs due to superior regulatory compliance status (ROHS3 Compliant, REACH Unaffected) and higher inventory availability, reducing supply chain risk.