RS005180R0FS73 Equivalent & Substitute Parts

Part Overview

The RS005180R0FS73 is a 180 Ohm, 5W wirewound axial resistor manufactured by Vishay Dale with ±1% tolerance and moisture-resistant construction. This component is classified as Active product status and is currently in stock with 1302 units available. The part operates across a temperature range of -65°C to 250°C with a temperature coefficient of ±20ppm/°C, making it suitable for industrial and high-temperature applications requiring precision resistance values.

Substitute parts become necessary when the primary part reaches end-of-life status, experiences supply constraints, or when design requirements mandate compliance with specific regulatory standards such as RoHS certification.

Substiute Parts

RS005180R0FS73
Vishay DaleIn Stock: 1361RS005180R0FS73 Datasheet
RS005180R0FS73
Current Part
RS005180R0FE73
Vishay DaleIn Stock: 1623RS005180R0FE73 Datasheet
RS005180R0FE73
Direct

Key Parameters

Parameter Value
Resistance 180 Ohms
Tolerance ±1%
Power Rating 5W
Composition Wirewound
Package Type Axial
Temperature Coefficient ±20ppm/°C
Operating Temperature Range -65°C to 250°C
Features Moisture Resistant
Physical Dimensions 0.312" Dia x 0.875" L (7.92mm x 22.23mm)
Number of Terminations 2

Substitute Part Grouping Explanation

Substitution eligibility for the RS005180R0FS73 is determined by strict equivalence across the following critical parameters:

  • Resistance value: 180 Ohms
  • Tolerance: ±1%
  • Power rating: 5W
  • Composition: Wirewound
  • Package configuration: Axial
  • Temperature coefficient: ±20ppm/°C
  • Operating temperature range: -65°C to 250°C
  • Physical dimensions: 0.312" Dia x 0.875" L
  • Termination count: 2
  • Features: Moisture Resistant

The RS005180R0FE73 meets all electrical and mechanical parameters required for direct substitution. Both parts are manufactured by Vishay Dale within the RS series and maintain identical specifications for resistance, tolerance, power dissipation, composition, and thermal characteristics.

Parameter Comparison

Parameter RS005180R0FS73 (Main) RS005180R0FE73 (Substitute)
Manufacturer Vishay Dale Vishay Dale
Series RS RS
Resistance 180 Ohms 180 Ohms
Tolerance ±1% ±1%
Power Rating 5W 5W
Composition Wirewound Wirewound
Temperature Coefficient ±20ppm/°C ±20ppm/°C
Operating Temperature -65°C to 250°C -65°C to 250°C
Package Type Axial Axial
Physical Dimensions 0.312" Dia x 0.875" L (7.92mm x 22.23mm) 0.312" Dia x 0.875" L (7.92mm x 22.23mm)
Features Moisture Resistant Moisture Resistant
Packaging Cut Tape (CT) Cut Tape (CT)
Product Status Active Active
RoHS Status RoHS non-compliant ROHS3 Compliant
REACH Status REACH Affected REACH Unaffected
ECCN EAR99 EAR99
HTSUS Code 8533.21.0080 8533.21.0080
Inventory Status 1302 Pcs New Original In Stock 1594 Pcs New Original In Stock

Engineering Selection Recommendations

The RS005180R0FE73 serves as a direct electrical and mechanical equivalent to the RS005180R0FS73. Both components are Active status products manufactured by Vishay Dale with identical electrical specifications and physical form factors.

The primary distinction between these parts lies in regulatory compliance status. The RS005180R0FE73 is ROHS3 Compliant and REACH Unaffected, whereas the RS005180R0FS73 is RoHS non-compliant and REACH Affected. Selection between these parts should be based on the regulatory requirements of the end application and target market. Applications subject to RoHS3 or REACH restrictions require the RS005180R0FE73. Applications without such regulatory constraints may utilize either part based on availability and supply chain considerations.

Both parts carry the same ECCN classification (EAR99) and HTSUS code (8533.21.0080), indicating equivalent export and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can RS005180R0FE73 be used as a direct replacement for RS005180R0FS73 in all applications?

A: Yes, the RS005180R0FE73 is electrically and mechanically equivalent. Both parts share identical resistance values, tolerance, power ratings, temperature coefficients, operating temperature ranges, and physical dimensions. The substitute part can be used in any circuit designed for the original part without modification.

Q: What is the difference between these two part numbers?

A: The primary differences are regulatory compliance certifications. The RS005180R0FE73 is ROHS3 Compliant and REACH Unaffected, while the RS005180R0FS73 is RoHS non-compliant and REACH Affected. All electrical and mechanical specifications are identical.

Q: Are there any package or form factor differences?

A: No. Both parts are supplied in Cut Tape (CT) packaging with identical axial package configurations and physical dimensions of 0.312" Dia x 0.875" L (7.92mm x 22.23mm).

Q: Which part should I select for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance or REACH compliance, specify RS005180R0FE73. For applications without such requirements, either part is acceptable based on availability and supply chain factors.

Q: Are both parts currently available?

A: Yes. RS005180R0FS73 has 1302 units in stock, and RS005180R0FE73 has 1594 units in stock as new original inventory.

Request Quote (Ships tomorrow)