RRR040P03TL P-Channel MOSFET Equivalent & Substitute Parts

Part Overview

The RRR040P03TL is a P-Channel MOSFET manufactured by Rohm Semiconductor, rated for 30V drain-to-source voltage with 4A continuous drain current at 25°C. The device is housed in a TSMT3 surface mount package and is classified as "Not For New Designs," indicating it has reached end-of-life status. This classification necessitates identification of functionally equivalent substitute components for ongoing production support and design continuity.

Key Parameters

Parameter	Value	Unit
FET Type	P-Channel	—
Drain-to-Source Voltage (Vdss)	30	V
Continuous Drain Current (Id) @ 25°C	4	A
On-Resistance (Rds On) @ 4A, 10V	45	mOhm
Gate Threshold Voltage (Vgs(th)) @ 1mA	2.5	V
Maximum Gate Voltage (Vgs)	±20	V
Power Dissipation (Max)	1	W
Operating Temperature (TJ)	150	°C
Mounting Type	Surface Mount	—
Package	TSMT3 (SC-96)	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the RRR040P03TL is determined by the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

FET Type: P-Channel topology
Drain-to-Source Voltage (Vdss): Minimum 30V rating
Continuous Drain Current (Id): Minimum 4A at 25°C
On-Resistance (Rds On): Maximum 45mOhm at rated current and gate voltage
Gate Voltage Range (Vgs): ±20V or greater
Power Dissipation: Minimum 1W capability
Operating Temperature: 150°C maximum junction temperature
RoHS Compliance: ROHS3 Compliant
Moisture Sensitivity: MSL 1 (Unlimited)

Package Compatibility: The RRR040P03TL uses a TSMT3 (SC-96) package. Substitute parts may use alternative surface mount packages (SOT-23-3, TO-236-3, TO-236AB) provided the electrical specifications meet or exceed the main part requirements. Package differences require PCB layout verification.

Substitute parts are grouped into two categories:

Direct Electrical Equivalents – Parts meeting all primary electrical specifications with Vdss ≥ 30V and Id ≥ 4A
Functional Alternatives – Parts with Vdss = 30V but reduced current ratings (3.5A–3.8A) suitable for applications with lower current demands

Parameter Comparison

Manufacturer Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (mOhm)	Vgs(th) (V)	Vgs Max (V)	Power Diss. (W)	Package	Product Status
RRR040P03TL	Rohm Semiconductor	30	4.0	45 @ 4A, 10V	2.5 @ 1mA	±20	1.0	TSMT3 (SC-96)	Not For New Designs
PMV35EPER	Nexperia USA Inc.	30	5.3	45 @ 4.2A, 10V	3.0 @ 250µA	±20	0.48 (Ta), 1.2 (Tc)	TO-236AB	Active
PJA3401A_R1_00001	Panjit International Inc.	30	3.6	54 @ 3.6A, 10V	1.3 @ 250µA	±12	1.25	SOT-23	Active
DMP3098L-7	Diodes Incorporated	30	3.8	70 @ 3.8A, 10V	2.1 @ 250µA	±20	1.08	SOT-23-3	Active
DMP3130L-7	Diodes Incorporated	30	3.5	77 @ 4.2A, 10V	1.3 @ 250µA	±12	0.7	SOT-23-3	Not For New Designs
ZXMP3F30FHTA	Diodes Incorporated	30	2.8	80 @ 2.5A, 10V	1.0 @ 250µA	±20	0.95	SOT-23-3	Active
DMG2307L-7	Diodes Incorporated	30	2.5	90 @ 2.5A, 10V	3.0 @ 250µA	±20	0.76	SOT-23-3	Not For New Designs
DMP31D0U-7	Diodes Incorporated	30	0.53	1000 @ 0.4A, 4.5V	1.1 @ 250µA	±8	0.45	SOT-23-3	Active
DMP2305U-7	Diodes Incorporated	20	4.2	60 @ 4.2A, 4.5V	0.9 @ 250µA	±8	1.4	SOT-23-3	Active
IRLML6402TRPBF	Infineon Technologies	20	3.7	65 @ 3.7A, 4.5V	1.2 @ 250µA	±12	1.3	Micro3™/SOT-23	Active

Engineering Selection Recommendations

Primary Substitute – Direct Electrical Equivalent:

PMV35EPER (Nexperia USA Inc.) is the recommended primary substitute for the RRR040P03TL. This device meets or exceeds all critical electrical specifications: 30V Vdss rating, 5.3A continuous drain current (exceeds 4A requirement), 45mOhm on-resistance matching the main part, and ±20V gate voltage range. The part is Active status, ROHS3 Compliant, and MSL 1. The TO-236AB package is compatible with standard SOT-23 footprints with minor layout verification. Power dissipation capability (1.2W at case temperature) supports the 1W requirement of the original design.

Secondary Substitutes – Functional Alternatives:

DMP3098L-7 (Diodes Incorporated) provides a 30V, 3.8A alternative in Active status with ROHS3 compliance. The 70mOhm on-resistance is higher than the main part but acceptable for applications with relaxed thermal constraints. SOT-23-3 package requires PCB layout adaptation.

PJA3401A_R1_00001 (Panjit International Inc.) offers 30V, 3.6A in Active status with 54mOhm on-resistance. The ±12V gate voltage range is narrower than the main part's ±20V specification. Suitable for designs with standard gate drive voltages.

ZXMP3F30FHTA (Diodes Incorporated) provides 30V rating with 2.8A continuous current in Active status. Recommended only for applications with current requirements below 3A. The 80mOhm on-resistance and ±20V gate voltage range support standard gate drive circuits.

Not Recommended for New Designs:

DMP3130L-7 and DMG2307L-7 carry "Not For New Designs" status and should not be selected for new production despite electrical compatibility. These parts are suitable only for legacy system maintenance.

Voltage-Reduced Alternatives:

DMP2305U-7 (20V, 4.2A) and IRLML6402TRPBF (20V, 3.7A) are suitable only for applications where the 30V Vdss rating is not required. These parts are not direct substitutes for the RRR040P03TL in 30V-rated circuits.

Not Suitable:

DMP31D0U-7 (530mA) is unsuitable due to insufficient current rating for the 4A requirement of the main part.

Frequently Asked Questions (FAQ)

Q: Can PMV35EPER directly replace RRR040P03TL without PCB modifications?

A: PMV35EPER uses a TO-236AB package while RRR040P03TL uses TSMT3 (SC-96). Both are surface mount packages with three leads, but pin spacing and footprint geometry differ. PCB layout verification is required. Electrical compatibility is confirmed; package footprint adaptation is necessary.

Q: What is the significance of the "Not For New Designs" status on RRR040P03TL?

A: This status indicates the part has reached end-of-life and is no longer recommended for new product development. Existing inventory remains available for legacy system support. New designs must select from Active-status alternatives such as PMV35EPER or DMP3098L-7.

Q: Why do some substitutes have lower current ratings (3.5A–3.8A) than the main part (4A)?

A: These parts are functional alternatives suitable for applications with current demands below 4A. They maintain the 30V Vdss rating and acceptable on-resistance characteristics. Selection depends on actual circuit current requirements. Parts with 2.8A or lower ratings are not suitable for 4A continuous operation.

Q: Is gate voltage range (Vgs) critical for substitution?

A: Yes. The RRR040P03TL supports ±20V gate voltage. Substitutes with ±12V or ±8V ratings are compatible with standard gate drive circuits (typically 5V or 10V) but may not support extended gate voltage ranges in specialized applications. Verify gate drive voltage compatibility with your circuit design.

Q: What is the impact of on-resistance (Rds On) differences between substitutes?

A: On-resistance directly affects power dissipation and thermal performance. The main part specifies 45mOhm at 4A, 10V. Substitutes with higher Rds On (70mOhm, 80mOhm, 90mOhm) generate more heat at the same current. Thermal analysis is required if substituting with higher Rds On parts. Lower Rds On values improve efficiency and reduce heat generation.

Q: Are all substitute parts ROHS3 Compliant and MSL 1?

A: Yes. All substitute parts listed in this reference meet ROHS3 Compliance and MSL 1 (Unlimited) moisture sensitivity requirements, matching the environmental and regulatory specifications of the main part.

Q: Can DMP2305U-7 or IRLML6402TRPBF be used in a 30V circuit?

A: No. Both parts are rated for 20V maximum Vdss. Using them in 30V circuits exceeds their voltage rating and will result in device failure. These parts are suitable only for applications with 20V or lower supply voltages.

Q: What package considerations apply when selecting a substitute?

A: The RRR040P03TL uses TSMT3 (SC-96), a larger surface mount package. Most substitutes use SOT-23-3 or TO-236AB packages, which are smaller. Verify PCB footprint compatibility, trace routing, and thermal management before substitution. Smaller packages may have different thermal characteristics and require layout optimization.

Q: Is PJA3401A_R1_00001 suitable for designs requiring ±20V gate voltage support?

A: PJA3401A_R1_00001 supports ±12V maximum gate voltage, which is narrower than the RRR040P03TL's ±20V range. It is suitable for standard gate drive circuits operating at ±5V or ±10V but not for applications requiring extended gate voltage ranges beyond ±12V.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message