RR2LAM6STR Equivalent & Substitute Parts Reference

Part Overview

The RR2LAM6STR by Rohm Semiconductor is a surface-mount general-purpose rectifier diode categorized under Diodes, Rectifiers. It features a 600 V maximum DC reverse voltage and a 2A average rectified current rating in a SOD-128 / PMDTM package. This part is currently classified as Not For New Designs, necessitating the identification of alternative models with matching electrical, mechanical, and compliance parameters to maintain seamless design-in and procurement processes.

Substiute Parts

RR2LAM6STR

Rohm SemiconductorIn Stock: 777RR2LAM6STR Datasheet

Current PartRFQ

RR2LAM6STFTR

Rohm SemiconductorIn Stock: 4601RR2LAM6STFTR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitutes for RR2LAM6STR are identified based on strict parametric alignment with the original. Substitute parts must match the following key parameters:

• Voltage - DC Reverse (Vr) (Max)
• Current - Average Rectified (Io)
• Voltage - Forward (Vf) (Max) @ If
• Speed classification
• Current - Reverse Leakage @ Vr
• Mounting Type
• Package / Case
• Supplier Device Package
• Operating Temperature - Junction
• Compliance Status (RoHS, MSL, REACH)

Only parts with identical values for these criteria are considered direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The RR2LAM6STR is classified as Not For New Designs. The RR2LAM6STFTR is a parametric equivalent with identical electrical, mechanical, and compliance characteristics, meeting ROHS3 and REACH requirements and possessing the same moisture sensitivity level for compatible assembly and logistics handling.

Frequently Asked Questions (FAQ)

Q1: What criteria determine the substitution between RR2LAM6STR and RR2LAM6STFTR?
A1: Substitution is based strictly on matching voltage, current, forward voltage, recovery speed, reverse leakage, mounting type, package, supplier device package, operating temperature, and regulatory compliance.

Q2: Are RR2LAM6STR and RR2LAM6STFTR physically interchangeable?
A2: Both parts utilize the same SOD-128 package and PMDTM supplier device package, ensuring physical interchangeability in assemblies designed for RR2LAM6STR.

Q3: Does the compliance status differ between RR2LAM6STR and RR2LAM6STFTR?
A3: Both parts are ROHS3 Compliant, have an MSL rating of 1 (Unlimited), and are REACH Unaffected.

Q4: Is there any difference in operating temperature range?
A4: Both RR2LAM6STR and RR2LAM6STFTR support a maximum junction operating temperature of 150°C.

Q5: Are there package or assembly considerations to note for these substitutes?
A5: Both models utilize identical package and supplier device designations, allowing for direct substitution in existing boards and assembly lines without modification.