RR1220P-2153-D-M Equivalent & Substitute Parts

Part Overview

The RR1220P-2153-D-M is a 215 kOhms ±0.5% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format with 0.1W power rating. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching resistance value, package format, and thermal operating range while accommodating variations in tolerance, power rating, and temperature coefficient specifications.

Substiute Parts

RR1220P-2153-D-M

SusumuIn Stock: 1112RR1220P-2153-D-M Datasheet

Current PartRFQ

RP73PF2A215KBTDF

TE Connectivity Passive ProductIn Stock: 3846RP73PF2A215KBTDF Datasheet

DirectRFQ

ERA-6AEB2153V

Panasonic Electronic ComponentsIn Stock: 15933ERA-6AEB2153V Datasheet

UpgradeRFQ

RN73C2A215KBTDF

TE Connectivity Passive ProductIn Stock: 3883RN73C2A215KBTDF Datasheet

UpgradeRFQ

RT0805BRD07215KL

YAGEOIn Stock: 5205RT0805BRD07215KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RR1220P-2153-D-M are qualified based on the following criteria:

Core Matching Parameters:

• Resistance value: 215 kOhms (exact match required)
• Package format: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Termination count: 2 (exact match required)

Allowable Variations:

• Tolerance: Substitutes with ±0.1% tolerance are acceptable as they represent improved precision over the ±0.5% specification
• Power rating: Substitutes with equal or higher power ratings (0.125W, 0.25W) are acceptable
• Operating temperature range: Substitutes with extended upper temperature limits (-55°C ~ 155°C) are acceptable
• Temperature coefficient: Substitutes with ±10ppm/°C or ±25ppm/°C are acceptable

Compliance Requirements:

• RoHS3 compliance (mandatory)
• MSL 1 rating (mandatory)
• Active product status (mandatory)

Parameter Comparison

Engineering Selection Recommendations

RN73C2A215KBTDF (TE Connectivity Passive Product)

This substitute provides identical power rating (0.1W) and package format to the main part. The tolerance is improved to ±0.1%, and the temperature coefficient is reduced to ±10ppm/°C, resulting in superior frequency stability. Operating temperature range extends to 155°C. All compliance requirements are met with ROHS3 certification and MSL 1 rating. Height increases from 0.50mm to 0.65mm; verify PCB clearance in space-constrained applications.

ERA-6AEB2153V (Panasonic Electronic Components)

This substitute features automotive AEC-Q200 qualification, suitable for applications requiring automotive-grade reliability. Tolerance improves to ±0.1% with power rating increased to 0.125W. Operating temperature extends to 155°C. ROHS3 and MSL 1 compliance confirmed. Height is 0.60mm. REACH status is unaffected.

RT0805BRD07215KL (YAGEO)

This substitute offers ±0.1% tolerance with 0.125W power rating in identical 0805 package. Operating temperature range extends to 155°C. All compliance certifications match the main part (ROHS3, MSL 1). Height is 0.60mm. Suitable for general industrial applications.

RP73PF2A215KBTDF (TE Connectivity Passive Product)

This substitute provides the highest power rating at 0.25W, accommodating applications with higher dissipation requirements. Tolerance is ±0.1% with extended operating temperature to 155°C. ROHS3 and MSL 1 compliance confirmed. Height increases to 0.65mm; verify PCB layout compatibility.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RR1220P-2153-D-M with a part having ±0.1% tolerance instead of ±0.5%?

A: Yes. Parts with ±0.1% tolerance (RN73C2A215KBTDF, ERA-6AEB2153V, RT0805BRD07215KL, RP73PF2A215KBTDF) are direct substitutes. The tighter tolerance represents improved precision and is compatible with circuits designed for the original ±0.5% specification.

Q: Are all substitute parts available in the same physical dimensions?

A: All substitute parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). However, seated height varies: the main part is 0.50mm maximum, while substitutes range from 0.60mm to 0.65mm. Verify PCB clearance and solder joint spacing in designs with tight vertical constraints.

Q: What is the difference between the temperature coefficient values?

A: The main part and most substitutes specify ±25ppm/°C. The RN73C2A215KBTDF offers ±10ppm/°C, indicating lower frequency drift across the operating temperature range. This improved stability is beneficial in precision analog circuits and frequency-dependent applications.

Q: Can I use a substitute with higher power rating than the original 0.1W?

A: Yes. Substitutes with 0.125W (ERA-6AEB2153V, RT0805BRD07215KL) or 0.25W (RP73PF2A215KBTDF) ratings are compatible. Higher power ratings provide additional thermal margin and are suitable for applications where the original 0.1W specification may be marginal.

Q: Does the ERA-6AEB2153V automotive qualification affect its use in non-automotive applications?

A: No. AEC-Q200 qualification indicates enhanced reliability testing and is not restrictive. The ERA-6AEB2153V is suitable for any application requiring the specified electrical and thermal characteristics, including non-automotive industrial and consumer electronics.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification, matching the main part. All parts also maintain MSL 1 (unlimited moisture sensitivity level) rating.

Q: What is the significance of the extended operating temperature range in substitutes?

A: Substitute parts rated to -55°C ~ 155°C provide 30°C additional upper temperature margin compared to the main part (-55°C ~ 125°C). This extended range accommodates applications in higher ambient temperature environments or components with elevated self-heating.

Q: Can I mix the main part and substitute parts in the same production batch?

A: All parts are electrically and mechanically compatible within the specified parameters. However, height variations (0.50mm to 0.65mm) may affect solder reflow profiles and PCB layout consistency. Verify manufacturing process compatibility before mixing parts in production.