RR0306S-204-JNH Equivalent & Substitute Parts

Part Overview

The RR0306S-204-JNH is a 200 kOhm ±5% 1/20W chip resistor in 0201 package form factor, manufactured by Delta Electronics/Cyntec. This component is classified as Active product status and is available in Tape & Reel packaging. The RR0306S-204-JNH serves as a precision resistive element in compact electronic assemblies where space constraints and specific resistance values are critical design parameters. Identification of equivalent and substitute parts becomes necessary when managing inventory across multiple suppliers, accommodating supply chain variations, or standardizing component selections across product lines while maintaining identical electrical and mechanical performance.

Substiute Parts

RR0306S-204-JNH

Delta Electronics/CyntecIn Stock: 917RR0306S-204-JNH Datasheet

Current PartRFQ

PFR03S-204-JNH

Delta Electronics/CyntecIn Stock: 33963PFR03S-204-JNH Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RR0306S-204-JNH is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 200 kOhms
• Tolerance classification: ±5%
• Power dissipation rating: 1/20W (0.05W)

Mechanical Parameters:

• Package designation: 0201 (0603 Metric)
• Component composition: Thick Film
• Termination count: 2 terminations

Environmental & Compliance Parameters:

• Moisture Sensitivity Level: 1 (Unlimited)
• REACH compliance status: REACH Unaffected
• Packaging configuration: Tape & Reel (TR)

Parts meeting all these specifications are classified as direct substitutes. The PFR03S-204-JNH satisfies all substitution criteria and is therefore a valid equivalent component.

Parameter Comparison

Engineering Selection Recommendations

Both the RR0306S-204-JNH and PFR03S-204-JNH are Active product status components manufactured by Delta Electronics/Cyntec. Both components carry REACH Unaffected status and are packaged in Tape & Reel format suitable for automated assembly processes. The PFR03S-204-JNH provides additional documented specifications including RoHS3 compliance, operating temperature range of -55°C to 125°C, and temperature coefficient of ±200ppm/°C, which may be relevant for applications requiring extended environmental performance documentation. Selection between these equivalent parts should be based on inventory availability, supply chain logistics, and any specific compliance documentation requirements for the end application.

Frequently Asked Questions (FAQ)

Q: Can PFR03S-204-JNH be used as a direct replacement for RR0306S-204-JNH?

A: Yes. Both components share identical electrical specifications (200 kOhms, ±5%, 1/20W), mechanical package (0201), composition (Thick Film), and environmental classifications (MSL 1, REACH Unaffected). Both are supplied in Tape & Reel packaging and are Active product status.

Q: Are there any package compatibility concerns when substituting these parts?

A: No. Both components use the 0201 (0603 Metric) package designation with identical physical dimensions: 0.024" L x 0.012" W (0.60mm x 0.30mm) and maximum seated height of 0.010" (0.26mm). Both feature 2 terminations and are compatible with standard surface mount assembly equipment.

Q: What is the significance of Moisture Sensitivity Level 1 for both parts?

A: MSL 1 (Unlimited) indicates these components have unlimited shelf life and do not require special moisture control during storage or handling. No baking or desiccant storage procedures are necessary prior to assembly.

Q: Do both parts meet the same compliance standards?

A: Both components are REACH Unaffected and carry EAR99 ECCN classification. The PFR03S-204-JNH additionally documents RoHS3 compliance. Both are classified under HTSUS code 8533.21.0030.

Q: What tolerance specification applies to these resistors?

A: Both components are specified at ±5% tolerance, meaning the actual resistance value will fall within the range of 190 kOhms to 210 kOhms at 25°C under standard measurement conditions.