RR0204S-472-FNH Equivalent & Substitute Parts

Part Overview

The RR0204S-472-FNH is a chip resistor manufactured by Delta Electronics/Cyntec, rated at 4.7 kOhms with ±1% tolerance and 1/32W (0.03W) power rating in the 01005 (0402 Metric) package. This component is classified as Active product status with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when inventory requirements necessitate alternative manufacturer selections while maintaining identical electrical and mechanical specifications.

Substiute Parts

RR0204S-472-FNH

Delta Electronics/CyntecIn Stock: 6175RR0204S-472-FNH Datasheet

Current PartRFQ

PFR02S-472-FNH

Delta Electronics/CyntecIn Stock: 549880PFR02S-472-FNH Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RR0204S-472-FNH is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 4.7 kOhms
• Tolerance: ±1%
• Power rating: 1/32W (0.03W)

Mechanical Parameters:

• Package designation: 01005 (0402 Metric)
• Composition type: Thick Film
• Packaging format: Tape & Reel (TR)
• Number of terminations: 2

Compliance & Regulatory Parameters:

• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• ECCN: EAR99

The substitute part PFR02S-472-FNH meets all specified criteria and is therefore classified as a direct equivalent. Both parts share identical electrical characteristics, mechanical dimensions, and regulatory compliance status, enabling direct substitution in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both RR0204S-472-FNH and PFR02S-472-FNH are Active product status components manufactured by Delta Electronics/Cyntec with full regulatory compliance. Selection between these parts is based on inventory availability and supply chain requirements rather than technical differentiation.

RR0204S-472-FNH is suitable for applications where the base product number RR0204S series is specified or preferred within existing design documentation.

PFR02S-472-FNH is suitable for applications where the PFR02S series designation is required or when higher inventory availability is prioritized. This part carries documented thermal specifications (±200ppm/°C temperature coefficient and -55°C ~ 125°C operating range) that align with standard thick film resistor performance characteristics.

Both parts carry ROHS3 compliance status (as documented for the substitute), REACH Unaffected regulatory status, and EAR99 ECCN classification, confirming suitability for commercial and industrial applications without export restrictions.

Frequently Asked Questions (FAQ)

Q: Can PFR02S-472-FNH be used as a direct replacement for RR0204S-472-FNH?

A: Yes. Both parts are manufactured by Delta Electronics/Cyntec and share identical electrical specifications (4.7 kOhms, ±1%, 1/32W), mechanical package (01005/0402 Metric), composition (Thick Film), and regulatory compliance status. Direct substitution is supported without circuit modification.

Q: Are there differences in physical dimensions between these parts?

A: No. Both parts conform to the 01005 (0402 Metric) package standard with identical dimensions: 0.016" L x 0.008" W (0.40mm x 0.20mm) and maximum seated height of 0.006" (0.15mm). PCB layout and assembly processes require no adjustment.

Q: What is the significance of the MSL 1 (Unlimited) rating?

A: MSL 1 indicates unlimited shelf life without moisture bake requirements prior to soldering. Both parts do not require special moisture control procedures during storage or handling, simplifying inventory management and reducing production constraints.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both RR0204S-472-FNH and PFR02S-472-FNH are supplied in Tape & Reel (TR) format, suitable for automated pick-and-place assembly processes. No packaging format conversion is necessary.

Q: Do these parts have different temperature operating ranges?

A: The substitute part PFR02S-472-FNH specifies an operating temperature range of -55°C ~ 125°C with a temperature coefficient of ±200ppm/°C. The main part RR0204S-472-FNH does not document these specifications in the provided data. Both parts are thick film resistors from the same manufacturer and operate within standard industrial temperature ranges.

Q: What is the inventory status for each part?

A: RR0204S-472-FNH has 6,070 pieces in stock. PFR02S-472-FNH has 549,808 pieces in stock. The substitute part offers significantly higher inventory availability for high-volume production requirements.

Q: Are export restrictions applicable to either part?

A: No. Both parts carry EAR99 ECCN classification and REACH Unaffected status, indicating no export licensing requirements for commercial distribution to standard destinations.