RR0204S-104-FNH Equivalent & Substitute Parts

Part Overview

The RR0204S-104-FNH is a chip resistor manufactured by Delta Electronics/Cyntec, rated at 100 kOhms with ±1% tolerance and 1/32W power rating in the 01005 (0402 Metric) package. This component is classified as Active product status with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified based on matching electrical specifications, package dimensions, and compliance certifications to ensure direct functional equivalence in surface-mount applications.

Substiute Parts

RR0204S-104-FNH

Delta Electronics/CyntecIn Stock: 768RR0204S-104-FNH Datasheet

Current PartRFQ

PFR02S-104-FNH

Delta Electronics/CyntecIn Stock: 57745PFR02S-104-FNH Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RR0204S-104-FNH are qualified based on the following criteria:

Electrical Parameters: Resistance value (100 kOhms), tolerance (±1%), and power rating (1/32W) must be identical to ensure functional equivalence in circuit applications.

Physical Parameters: Package designation (01005/0402 Metric) and composition (Thick Film) must match to guarantee mechanical and thermal compatibility with printed circuit board layouts and reflow processes.

Compliance & Certifications: Moisture sensitivity level (MSL 1), REACH status (REACH Unaffected), and ECCN classification (EAR99) must align to maintain regulatory compliance and supply chain continuity.

Packaging Format: Tape & Reel (TR) format ensures compatibility with automated assembly equipment and handling procedures.

Parameter Comparison

Engineering Selection Recommendations

The PFR02S-104-FNH qualifies as a direct substitute for the RR0204S-104-FNH based on complete alignment of all critical electrical, mechanical, and compliance parameters. Both components are manufactured by Delta Electronics/Cyntec, share identical resistance, tolerance, power rating, and package specifications, and maintain equivalent regulatory compliance status (REACH Unaffected, EAR99 classification, MSL 1).

Both parts are classified as Active product status, ensuring continued availability and manufacturing support. The substitute part provides additional technical documentation including temperature coefficient (±200ppm/°C) and operating temperature range (-55°C ~ 125°C), which are standard specifications for this resistor category.

Selection between these parts may be based on inventory availability, lead time requirements, or supply chain preferences, as all functional and compliance criteria are equivalent.

Frequently Asked Questions (FAQ)

Q: Can PFR02S-104-FNH be used as a direct replacement for RR0204S-104-FNH?

A: Yes. Both parts share identical electrical specifications (100 kOhms, ±1%, 1/32W), package type (01005/0402 Metric), composition (Thick Film), and compliance certifications. Direct substitution is supported without circuit redesign or board layout modification.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both components use the 01005 (0402 Metric) package with dimensions of 0.016" L x 0.008" W (0.40mm x 0.20mm) and maximum seated height of 0.006" (0.15mm). PCB footprints and assembly processes are interchangeable.

Q: Do both parts have the same moisture sensitivity requirements?

A: Yes. Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity precautions are required during storage, handling, or assembly.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are REACH Unaffected, classified as EAR99, and carry identical HTSUS codes (8533.21.0030). Regulatory compliance is equivalent.

Q: What is the difference between the RR0204S and PFR02S series designations?

A: The series designation indicates the product line within Delta Electronics/Cyntec's resistor portfolio. Both series meet identical electrical and mechanical specifications for this 100 kOhm, 1% tolerance, 1/32W application. The series difference reflects internal product categorization and does not affect functional performance or compatibility.

Q: Can these parts be used interchangeably in automated assembly?

A: Yes. Both parts are supplied in Tape & Reel (TR) format with identical package specifications, ensuring compatibility with standard surface-mount assembly equipment and processes.