Equivalent & Substitute Parts Reference: RPP20-2405SW/N

Part Overview

The RPP20-2405SW/N from Recom Power is an isolated DC-DC converter module rated at 5V output, 20W, with a maximum output current of 4A. It features wide input voltage support (9V–36V), 1.6 kV isolation, and is packaged in a 6-DIP through-hole format. The product is marked obsolete, so it is necessary to identify alternative models with matching electrical and mechanical characteristics for applications requiring continued support and design continuity.

Substiute Parts

RPP20-2405SW/N

Recom PowerIn Stock: 822RPP20-2405SW/N Datasheet

Current PartRFQ

S24SE05004NDFA

Delta ElectronicsIn Stock: 1219S24SE05004NDFA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute DC-DC converter modules are grouped strictly by matching the following key parameters: isolated module type, input voltage range (9V–36V), output voltage (5V), maximum output current (4A), maximum power (20W), voltage isolation (1.6kV), output count (1), mounting type (through hole), package/case (6-DIP Module), control features (Enable, Active Low), RoHS3 compliance, and application category (ITE Commercial). No deviations or inferred compatibility are considered; all substitute relationships are strictly parameter-to-parameter matches.

Parameter Comparison

Engineering Selection Recommendations

The RPP20-2405SW/N is marked obsolete. Substitute models must be selected based on identical compliance (ROHS3 Compliant, REACH Unaffected, ECCN EAR99), consistent moisture sensitivity level (MSL 1), and matching certifications. Current inventory status and active product status are essential for continued sourcing and supply chain stability.

Frequently Asked Questions (FAQ)

Q1: What parameters must match for a DC-DC converter module to be a substitute?
A1: Substitute selection must strictly match input voltage range, output voltage and current, power rating, isolation voltage, number of outputs, mounting type, package/case format, control features, and compliance certifications.

Q2: Can differences in module dimensions affect compatibility?
A2: All mechanical parameters such as module size and package type must match the design requirements; the provided substitute uses the same package/case (6-DIP Module) format.

Q3: Are compliance certifications mandatory for substitution?
A3: All listed substitutes must match compliance categories (ROHS3, REACH, ECCN) as specified in the part details.

Q4: Is the substitute (S24SE05004NDFA) suitable for commercial ITE applications?
A4: Both main and substitute parts are specified for ITE (Commercial) applications. All provided substitution relationships are based on matching application category.

Q5: Do operating temperature ranges need to be identical?
A5: Operating temperature is a key parameter for environmental compatibility. Substitute listed matches the main part within the specified parameters. Only provided values are considered.