Equivalent & Substitute Parts Reference for RPP20-1215D/N

Part Overview

RPP20-1215D/N by Recom Power is an isolated DC-DC converter module, offering dual outputs of +15V and -15V at 666mA each, with a maximum power rating of 20 W. The part features robust isolation (1.6 kV), remote On/Off control, and integrated protection functions including OCP, OTP, OVP, SCP, and UVLO. It is designed for ITE (Commercial) applications and incorporates ROHS3 and REACH environmental compliance.

This product is listed as Obsolete, necessitating the identification of suitable alternative DC-DC converter modules with matching critical electrical, mechanical, and regulatory parameters for continued system operation and procurement.

Substiute Parts

RPP20-1215D/N

Recom PowerIn Stock: 847RPP20-1215D/N Datasheet

Current PartRFQ

S24DE150R6NDFA

Delta ElectronicsIn Stock: 1315S24DE150R6NDFA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for isolated DC-DC converter modules are grouped strictly by the following parameters: input voltage range, output voltages and maximum output currents, power rating, isolation voltage, mounting type, package, compliance status (RoHS, REACH), moisture sensitivity, control features, and operating temperature. Only parts matching or exceeding these criteria are substituted to ensure direct compatibility in commercial ITE applications.

Key substitution criteria:

• Dual isolated outputs: +15V, -15V
• Output current: minimum 666mA per channel
• Power rating: minimum 20 W
• Input voltage range: must fully cover 9V–18V
• Isolation: minimum 1.6 kV
• Package: 6-DIP Module, Through Hole
• Compliance: ROHS3, REACH Unaffected, ECCN, HTSUS as specified
• Control Features: Enable, Active Low
• Moisture Sensitivity Level: 1 (Unlimited)

Parameter Comparison

Engineering Selection Recommendations

The RPP20-1215D/N is obsolete. S24DE150R6NDFA by Delta Electronics is listed as active and conforms to ROHS3 and REACH Unaffected status, matching ECCN and HTSUS codes provided. Both products use the same mounting type, package, and have matching output configurations and controls. The substitute part satisfies key compliance, certification, and availability requirements, allowing for direct part selection within regulated environments.

Frequently Asked Questions (FAQ)

Q1: What are the primary electrical parameters required for substituting RPP20-1215D/N DC-DC converter? A1: Output voltages (+15V, -15V), output currents (minimum 666mA), input voltage range (must cover 9V–18V), power rating (at least 20 W), and isolation voltage (minimum 1.6 kV).

Q2: Is the package and mounting of S24DE150R6NDFA compatible with RPP20-1215D/N? A2: Both parts use through hole mounting and a 6-DIP module package. Dimensional differences should be considered for mechanical fit.

Q3: Are both parts compliant with RoHS and REACH environmental regulations? A3: RPP20-1215D/N and S24DE150R6NDFA are specified as ROHS3 Compliant and REACH Unaffected.

Q4: How do control features compare between the main and substitute parts? A4: Enable, Active Low control features are specified for both RPP20-1215D/N and S24DE150R6NDFA.

Q5: Are both DC-DC converter modules suitable for ITE (Commercial) applications? A5: Both parts are specified for ITE (Commercial) use within the provided parameters.

Q6: What is the significance of the Moisture Sensitivity Level (MSL) listed? A6: An MSL of 1 (Unlimited) for both parts indicates suitability for standard handling and storage practices.

Q7: Is substitute selection based on any product status criteria? A7: RPP20-1215D/N is indicated as obsolete; S24DE150R6NDFA is active and available for procurement.