RPM6936 Equivalent & Substitute Parts

Part Overview

The RPM6936 is a remote receiver sensor manufactured by Rohm Semiconductor, designed for infrared signal reception at 36.0kHz frequency with a 16-meter sensing distance. This component is classified as an optical sensor for through-hole mounting applications. The RPM6936 has reached obsolete product status, making identification of functionally equivalent alternatives necessary for ongoing design support and component procurement.

Substiute Parts

RPM6936

Rohm SemiconductorIn Stock: 1117RPM6936 Datasheet

Current PartRFQ

TSOP2136

Vishay Semiconductor Opto DivisionIn Stock: 10222TSOP2136 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RPM6936 is based on the following critical parameters that must remain consistent:

• B.P.F. Center Frequency: 36.0kHz (infrared protocol compatibility)
• Voltage Supply Range: 4.5 V ~ 5.5 V (circuit compatibility)
• Mounting Type: Through Hole (mechanical fit)
• Orientation: Side View (PCB layout compatibility)

The TSOP2136 from Vishay Semiconductor Opto Division meets all mandatory substitution criteria. While the TSOP2136 offers extended sensing distance (35m versus 16m) and lower supply current (1.1 mA versus 1.5 mA), these represent performance improvements rather than deviations from the core functional requirements.

Parameter Comparison

Engineering Selection Recommendations

The TSOP2136 is the direct functional equivalent for RPM6936 replacement. Both components share identical B.P.F. center frequency (36.0kHz), supply voltage range (4.5 V ~ 5.5 V), mounting type (through hole), and orientation (side view). The TSOP2136 maintains active product status with full ROHS3 compliance and REACH unaffected certification, ensuring long-term availability and regulatory compliance. The TSOP2136 demonstrates superior performance characteristics including extended sensing distance and reduced supply current, with no electrical or mechanical incompatibilities relative to the RPM6936.

Frequently Asked Questions (FAQ)

Q: Can TSOP2136 directly replace RPM6936 in existing designs?

A: Yes. Both components operate at 36.0kHz center frequency with identical supply voltage requirements (4.5 V ~ 5.5 V), through-hole mounting, and side-view orientation. No circuit modifications are required.

Q: What is the significance of the extended sensing distance in TSOP2136?

A: The TSOP2136 provides 35-meter sensing distance compared to RPM6936's 16-meter range. This represents enhanced performance capability and does not create incompatibility. Designs requiring only 16-meter range will function correctly with the extended-range substitute.

Q: Are there compliance differences between these components?

A: Both components are ROHS3 compliant and REACH unaffected. The TSOP2136 offers improved moisture sensitivity level (MSL 1 versus MSL 3), indicating superior moisture resistance and handling flexibility.

Q: Does the lower supply current of TSOP2136 affect circuit design?

A: No. The TSOP2136 requires 1.1 mA versus RPM6936's 1.5 mA. This reduction represents improved efficiency and does not create electrical incompatibility. Existing power supply designs will function correctly with reduced current draw.

Q: What packaging format is TSOP2136 supplied in?

A: TSOP2136 is supplied in tube packaging, suitable for automated assembly processes and manual component handling.