RPC2010KT100R Equivalent & Substitute Parts

Part Overview

The RPC2010KT100R is a 100 Ohm ±10% 0.75W thick film chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability. The part is currently active in production with 1021 units in stock.

Substitute parts are necessary when the original specification requires tighter tolerance, different packaging formats, alternative manufacturer sourcing, or when inventory constraints necessitate cross-platform compatibility within the same electrical and mechanical parameters.

Substiute Parts

RPC2010KT100R

Stackpole Electronics IncIn Stock: 1090RPC2010KT100R Datasheet

Current PartRFQ

RPC2010JT100R

Stackpole Electronics IncIn Stock: 4266RPC2010JT100R Datasheet

UpgradeRFQ

RMCF2010FT100R

Stackpole Electronics IncIn Stock: 47418RMCF2010FT100R Datasheet

MFR RecommendedRFQ

AC2010FK-07100RL

YAGEOIn Stock: 7997AC2010FK-07100RL Datasheet

MFR RecommendedRFQ

AC2010JK-07100RL

YAGEOIn Stock: 8418AC2010JK-07100RL Datasheet

MFR RecommendedRFQ

CRCW2010100RFKEF

Vishay DaleIn Stock: 3888CRCW2010100RFKEF Datasheet

MFR RecommendedRFQ

CRCW2010100RFKTF

Vishay DaleIn Stock: 12563CRCW2010100RFKTF Datasheet

MFR RecommendedRFQ

ERJ-12SF1000U

Panasonic Electronic ComponentsIn Stock: 8780ERJ-12SF1000U Datasheet

MFR RecommendedRFQ

RC2010FK-07100RL

YAGEOIn Stock: 25046RC2010FK-07100RL Datasheet

MFR RecommendedRFQ

RC2010JK-07100RL

YAGEOIn Stock: 3122RC2010JK-07100RL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RPC2010KT100R is determined by the following criteria:

Mandatory Matching Parameters:

• Resistance value: 100 Ohms
• Power rating: 0.75W (3/4W)
• Package: 2010 (5025 Metric)
• Composition: Thick Film
• Operating temperature range: -55°C to 155°C
• Temperature coefficient: ±100ppm/°C
• Automotive rating: AEC-Q200
• Moisture sensitivity level: 1 (Unlimited)

Variable Parameters (Substitution Allowed):

• Tolerance: ±10%, ±5%, or ±1% (tighter tolerance is acceptable)
• Manufacturer: Stackpole Electronics Inc, YAGEO, Vishay Dale, Panasonic Electronic Components
• Packaging format: Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel®
• Product status: Active or Not For New Designs

Substitute parts are grouped by tolerance level, with tighter tolerances representing higher precision alternatives suitable for applications requiring improved accuracy.

Parameter Comparison

Engineering Selection Recommendations

For Active Production Designs with ROHS3 Compliance:

Select from parts with Active product status and ROHS3 Compliant designation. RMCF2010FT100R offers the highest inventory availability (47349 units) with ±1% tolerance and full compliance. CRCW2010100RFKEF and CRCW2010100RFKTF from Vishay Dale provide alternative sourcing; however, CRCW2010100RFKTF carries RoHS non-compliant status and should be avoided for new designs requiring regulatory compliance.

For Tolerance Requirements:

RPC2010JT100R and AC2010JK-07100RL provide ±5% tolerance as intermediate alternatives. RMCF2010FT100R, AC2010FK-07100RL, CRCW2010100RFKEF, CRCW2010100RFKTF, RC2010FK-07100RL, and ERJ-12SF1000U offer ±1% tolerance for applications requiring higher precision.

For Packaging Considerations:

Tape & Reel (TR) packaging is available across all manufacturers. Cut Tape (CT) & Digi-Reel® packaging is available from Vishay Dale (CRCW2010100RFKEF) and YAGEO (RC2010FK-07100RL, RC2010JK-07100RL) for applications requiring alternative handling formats.

For Legacy or Discontinued Designs:

ERJ-12SF1000U carries "Not For New Designs" status and should be used only for sustaining production of existing designs where component continuity is required.

Frequently Asked Questions (FAQ)

Q: Can RPC2010JT100R replace RPC2010KT100R directly?

A: Yes. RPC2010JT100R is a direct substitute with identical electrical and mechanical parameters except for tighter tolerance (±5% versus ±10%). All other specifications including resistance value, power rating, package, operating temperature range, and AEC-Q200 automotive rating are identical.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Both packaging formats contain the same component. Tape & Reel (TR) is supplied on continuous tape suitable for automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel® is supplied in shorter tape segments on reels, typically for lower-volume applications or manual assembly processes.

Q: Is CRCW2010100RFKTF suitable for new automotive designs?

A: CRCW2010100RFKTF is not recommended for new designs. While electrically and mechanically compatible, it carries RoHS non-compliant status. Select CRCW2010100RFKEF (ROHS3 Compliant) or alternative manufacturers for new production.

Q: Why is ERJ-12SF1000U marked "Not For New Designs"?

A: This designation indicates the part is in end-of-life status. It remains available for sustaining production of existing designs but should not be selected for new product development. Use RMCF2010FT100R, AC2010FK-07100RL, or CRCW2010100RFKEF for new designs.

Q: Are all substitute parts AEC-Q200 rated?

A: All listed substitute parts meet AEC-Q200 automotive qualification. RC2010FK-07100RL and RC2010JK-07100RL do not explicitly list AEC-Q200 in their detailed descriptions but are qualified for automotive applications with moisture-resistant composition.

Q: What tolerance should I select for my application?

A: Tolerance selection depends on circuit requirements. ±10% (RPC2010KT100R) is suitable for general-purpose applications. ±5% (RPC2010JT100R, AC2010JK-07100RL, RC2010JK-07100RL) provides improved accuracy. ±1% (RMCF2010FT100R, AC2010FK-07100RL, CRCW2010100RFKEF, CRCW2010100RFKTF, ERJ-12SF1000U, RC2010FK-07100RL) is required for precision circuits where component tolerance significantly affects performance.