RPC2010JT33K0 Equivalent & Substitute Parts

Part Overview

The RPC2010JT33K0 is a 33 kOhms ±5% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor is designed for automotive applications with AEC-Q200 qualification and pulse withstanding capability. The part is currently active in production with 983 pieces available in stock. Substitute parts may be required due to supply chain constraints, inventory availability, or specific application requirements while maintaining equivalent electrical and mechanical performance.

Substiute Parts

RPC2010JT33K0

Stackpole Electronics IncIn Stock: 1023RPC2010JT33K0 Datasheet

Current PartRFQ

RC2010JK-0733KL

YAGEOIn Stock: 7739RC2010JK-0733KL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RPC2010JT33K0 is determined by strict equivalence across the following critical parameters:

• Resistance value: 33 kOhms
• Tolerance: ±5%
• Power rating: 0.75W
• Package: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

The RC2010JK-0733KL from YAGEO meets all these electrical and mechanical specifications, making it a direct equivalent substitute. Both parts share identical resistance, tolerance, power rating, package dimensions, and environmental operating parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the RPC2010JT33K0 and RC2010JK-0733KL are active production parts with ROHS3 compliance and identical electrical specifications. The RPC2010JT33K0 features automotive AEC-Q200 qualification and pulse withstanding capability. The RC2010JK-0733KL is specified with moisture resistant characteristics. Selection between these parts should be based on application requirements, supply availability, and any specific automotive or environmental certifications mandated by the end application. Both parts are suitable for general-purpose and automotive circuit applications within the specified operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can RC2010JK-0733KL replace RPC2010JT33K0 in automotive applications?

A: Both parts meet the same electrical specifications (33 kOhms ±5%, 0.75W, 2010 package) and operating temperature range (-55°C ~ 155°C). The RPC2010JT33K0 carries AEC-Q200 automotive qualification. Application requirements should determine suitability for specific automotive use cases.

Q: Are the physical dimensions identical?

A: Yes. Both parts are packaged in 2010 (5025 Metric) with identical dimensions of 0.197" L x 0.098" W (5.00mm x 2.50mm) and maximum seated height of 0.026" (0.65mm). They are mechanically interchangeable on PCBs designed for 2010 package resistors.

Q: What is the difference in composition between these parts?

A: Both parts use thick film composition. The RPC2010JT33K0 emphasizes pulse withstanding capability, while the RC2010JK-0733KL emphasizes moisture resistant characteristics. Both maintain identical temperature coefficient (±100ppm/°C) and operating range.

Q: Are both parts RoHS compliant?

A: Yes. Both the RPC2010JT33K0 and RC2010JK-0733KL are ROHS3 compliant with MSL rating of 1 (Unlimited moisture sensitivity level).

Q: What determines substitutability between these parts?

A: Substitutability is determined by matching resistance value, tolerance, power rating, package type, composition, temperature coefficient, operating temperature range, and compliance certifications. Both parts meet all these criteria for direct substitution.