RPC2010JT200R Equivalent & Substitute Parts

Part Overview

The RPC2010JT200R is a 200 Ohm ±5% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor is designed for automotive applications with AEC-Q200 qualification and pulse withstanding capability. The part is currently active in production with 930 pieces available in stock. Substitute parts may be required due to supply chain constraints, inventory availability, or specific application requirements while maintaining equivalent electrical and mechanical performance.

Substiute Parts

RPC2010JT200R

Stackpole Electronics IncIn Stock: 972RPC2010JT200R Datasheet

Current PartRFQ

RC2010JK-07200RL

YAGEOIn Stock: 11602RC2010JK-07200RL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RPC2010JT200R is based on strict equivalence of the following critical parameters:

• Resistance value: 200 Ohms
• Tolerance: ±5%
• Power rating: 0.75W
• Package type: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Termination count: 2
• Physical dimensions: 0.197" L x 0.098" W (5.00mm x 2.50mm)
• Height - Seated (Max): 0.026" (0.65mm)
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

The RC2010JK-07200RL from YAGEO meets all these critical parameters and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the RPC2010JT200R and RC2010JK-07200RL are active production parts with full RoHS3 compliance and REACH unaffected status. The RC2010JK-07200RL from YAGEO demonstrates higher inventory availability (11,510 pieces) compared to the RPC2010JT200R (930 pieces), making it a viable alternative for supply chain continuity. Both parts meet identical electrical specifications, physical dimensions, and environmental operating parameters. Selection between these parts should be based on procurement lead times, inventory requirements, and supplier qualification status within your organization.

Frequently Asked Questions (FAQ)

Q: Can RC2010JK-07200RL be used as a direct replacement for RPC2010JT200R in automotive applications?

A: Yes. Both parts meet identical electrical parameters (200 Ohms ±5%, 0.75W), operate across the same temperature range (-55°C ~ 155°C), share identical physical dimensions in the 2010 package, and maintain equivalent RoHS3 compliance and MSL ratings.

Q: Are there differences in automotive qualification between these parts?

A: The RPC2010JT200R carries AEC-Q200 automotive qualification with pulse withstanding capability. The RC2010JK-07200RL is specified as moisture resistant. Both parts are suitable for automotive use; however, application-specific requirements should determine final selection.

Q: Do these parts have identical PCB footprints?

A: Yes. Both parts use the 2010 (5025 Metric) package with identical dimensions: 0.197" L x 0.098" W (5.00mm x 2.50mm) and maximum seated height of 0.026" (0.65mm). PCB footprints are interchangeable.

Q: What is the significance of MSL 1 rating for both parts?

A: MSL 1 (Unlimited) indicates these parts have unlimited shelf life and require no special moisture control during storage or handling, simplifying logistics and inventory management.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both RPC2010JT200R and RC2010JK-07200RL are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.