RPC2010JT150K Equivalent & Substitute Parts

Part Overview

The RPC2010JT150K is a 150 kOhms ±5% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor is designed for automotive applications with AEC-Q200 qualification and pulse withstanding capability. The part is currently active in production with 1061 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and design requirements across different manufacturing sources.

Substiute Parts

RPC2010JT150K

Stackpole Electronics IncIn Stock: 1148RPC2010JT150K Datasheet

Current PartRFQ

CRGS2010J150K

TE Connectivity AMP ConnectorsIn Stock: 1172CRGS2010J150K Datasheet

UpgradeRFQ

RC2010JK-07150KL

YAGEOIn Stock: 5627RC2010JK-07150KL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RPC2010JT150K are qualified based on the following electrical and mechanical parameters:

• Resistance value: 150 kOhms
• Tolerance: ±5%
• Power rating: 0.75W (3/4W)
• Package type: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Physical dimensions: 0.197" L x 0.098" W (5.00mm x 2.50mm)
• Height - Seated (Max): 0.026" (0.65mm)
• Number of terminations: 2

All identified substitute parts match these core parameters and are therefore electrically and mechanically interchangeable with the main part number.

Parameter Comparison

Engineering Selection Recommendations

All three parts are active products with current manufacturing status and full RoHS compliance. The RPC2010JT150K carries AEC-Q200 automotive qualification with pulse withstanding capability. The CRGS2010J150K from TE Connectivity provides pulse withstanding performance without automotive-specific certification. The RC2010JK-07150KL from YAGEO includes moisture-resistant construction and maintains unlimited moisture sensitivity rating.

Selection between these parts should be based on specific application requirements regarding automotive qualification, pulse withstanding performance, and moisture resistance features. All parts are electrically and mechanically equivalent for standard circuit applications within the specified parameter ranges.

Frequently Asked Questions (FAQ)

Q: Are these parts pin-compatible? A: Yes. All substitute parts have identical 2-termination configurations and are pin-compatible with the RPC2010JT150K.

Q: Can these parts be used interchangeably on the same PCB? A: Yes. All parts share identical physical dimensions (0.197" L x 0.098" W, 5.00mm x 2.50mm) and maximum seated height (0.026" / 0.65mm), ensuring direct PCB footprint compatibility.

Q: What is the difference between the main part and substitutes? A: The RPC2010JT150K includes AEC-Q200 automotive certification and pulse withstanding features. The CRGS2010J150K provides pulse withstanding without automotive certification. The RC2010JK-07150KL emphasizes moisture-resistant construction. All three deliver identical electrical performance within the specified tolerance and temperature range.

Q: Are all parts RoHS compliant? A: Yes. The RPC2010JT150K and RC2010JK-07150KL are ROHS3 compliant. The CRGS2010J150K is RoHS compliant.

Q: What is the operating temperature range for these resistors? A: All parts operate across -55°C to 155°C, supporting both industrial and automotive temperature requirements.

Q: Do these parts have moisture sensitivity concerns? A: The RPC2010JT150K and RC2010JK-07150KL both carry MSL 1 (Unlimited) rating. The CRGS2010J150K lists MSL as Not Applicable, indicating no moisture sensitivity restrictions.