RPC0805JT130R Equivalent & Substitute Parts

Part Overview

The RPC0805JT130R is a 130 Ohms ±5% 0.25W thick film chip resistor in 0805 (2012 Metric) package manufactured by Stackpole Electronics Inc. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability. The part is currently active in production with 1019 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

RPC0805JT130R

Stackpole Electronics IncIn Stock: 1061RPC0805JT130R Datasheet

Current PartRFQ

ERJ-P06J131V

Panasonic Electronic ComponentsIn Stock: 39052ERJ-P06J131V Datasheet

DirectRFQ

ESR10EZPJ131

Rohm SemiconductorIn Stock: 7821ESR10EZPJ131 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RPC0805JT130R is determined by strict equivalence in the following parameters: resistance value (130 Ohms), tolerance (±5%), package type (0805), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive AEC-Q200 compliance.

Two substitute parts meet these criteria with variations in power rating:

Direct Equivalent (Higher Power Rating): ERJ-P06J131V by Panasonic Electronic Components maintains all critical electrical and mechanical specifications while offering increased power dissipation capability (0.5W vs. 0.25W). This part is suitable for applications where the original 0.25W rating provides insufficient margin.

Upgrade Alternative (Mid-Range Power Rating): ESR10EZPJ131 by Rohm Semiconductor provides intermediate power rating (0.4W) between the original and the Panasonic option, maintaining full compatibility across all other specified parameters.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and full compliance with ROHS3 and AEC-Q200 automotive standards. Selection between RPC0805JT130R, ERJ-P06J131V, and ESR10EZPJ131 is determined by circuit power dissipation requirements and PCB thermal design constraints.

The RPC0805JT130R remains the primary specification when 0.25W power rating is sufficient for the application. ERJ-P06J131V provides the highest power dissipation margin at 0.5W and is suitable for high-stress thermal environments. ESR10EZPJ131 offers a balanced intermediate option at 0.4W power rating. All three parts are electrically and mechanically interchangeable within the 0805 package footprint, with minor height variations (0.60mm to 0.70mm seated height) that do not affect standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P06J131V be used as a direct replacement for RPC0805JT130R?

A: Yes. ERJ-P06J131V is electrically and mechanically compatible. The primary difference is increased power rating (0.5W vs. 0.25W), which provides additional thermal margin without affecting circuit performance. The 0.028" seated height is within standard PCB assembly tolerances for 0805 components.

Q: What is the difference between the three substitute options?

A: All three parts share identical resistance (130 Ohms), tolerance (±5%), package (0805), temperature coefficient (±200ppm/°C), and operating range (-55°C ~ 155°C). The distinction is power rating: RPC0805JT130R at 0.25W, ESR10EZPJ131 at 0.4W, and ERJ-P06J131V at 0.5W. Selection depends on circuit power dissipation requirements.

Q: Are all parts AEC-Q200 automotive rated?

A: Yes. RPC0805JT130R, ERJ-P06J131V, and ESR10EZPJ131 are all AEC-Q200 qualified with pulse withstanding capability, suitable for automotive applications.

Q: Do the height differences affect PCB assembly?

A: No. The seated height variation (0.60mm to 0.70mm) is within standard tolerance for 0805 (2012 Metric) package components and does not impact reflow soldering, pick-and-place accuracy, or board-level clearance in standard automotive PCB designs.

Q: Are all parts RoHS3 compliant?

A: Yes. RPC0805JT130R, ERJ-P06J131V, and ESR10EZPJ131 are all ROHS3 compliant with MSL rating of 1 (Unlimited moisture sensitivity level).