RPC0603JT82K0 Equivalent & Substitute Parts

Part Overview

The RPC0603JT82K0 is an 82 kOhms ±5% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Stackpole Electronics Inc. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability. The part is currently active in production with 920 pieces available in inventory. Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing, inventory constraints, or supply chain optimization while maintaining electrical and mechanical compatibility.

Substiute Parts

RPC0603JT82K0

Stackpole Electronics IncIn Stock: 1030RPC0603JT82K0 Datasheet

Current PartRFQ

RC0603JR-0782KL

YAGEOIn Stock: 537200RC0603JR-0782KL Datasheet

MFR RecommendedRFQ

RC1608J823CS

Samsung Electro-MechanicsIn Stock: 750RC1608J823CS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RPC0603JT82K0 are qualified based on the following criteria:

• Identical resistance value: 82 kOhms
• Matching tolerance: ±5%
• Equivalent power rating: 0.1W (1/10W)
• Same package designation: 0603 (1608 Metric)
• Identical physical dimensions: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Matching composition: Thick Film
• Equivalent temperature coefficient: ±100ppm/°C
• Overlapping operating temperature range: -55°C ~ 155°C
• Compliance with RoHS3 and REACH requirements
• Moisture Sensitivity Level 1 (Unlimited)

All substitute parts listed maintain these core electrical and mechanical parameters, ensuring direct functional equivalence in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts listed—RPC0603JT82K0, RC0603JR-0782KL, and RC1608J823CS—are active production components with full RoHS3 compliance and REACH unaffected status. Selection between these parts should be based on:

• Availability and lead time requirements
• Packaging format preference (Tape & Reel versus Cut Tape)
• Supply chain and procurement agreements
• Inventory levels at distribution partners

The RPC0603JT82K0 carries automotive AEC-Q200 qualification with pulse withstanding capability. The RC0603JR-0782KL and RC1608J823CS are specified with moisture resistant features. All parts maintain identical electrical performance within the stated tolerance and temperature operating range.

Frequently Asked Questions (FAQ)

Q: Can RC0603JR-0782KL be used as a direct replacement for RPC0603JT82K0?

A: Yes. Both parts share identical resistance (82 kOhms), tolerance (±5%), power rating (0.1W), package (0603), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). Physical dimensions and termination count are identical. Both are RoHS3 compliant with MSL 1.

Q: What is the difference between the packaging formats listed?

A: RPC0603JT82K0 is supplied in Tape & Reel (TR) format. RC0603JR-0782KL is available in Cut Tape (CT) & Digi-Reel® format. RC1608J823CS is supplied in Cut Tape (CT) format. These are packaging and delivery method differences only; the components themselves are electrically and mechanically identical.

Q: Are all substitute parts suitable for automotive applications?

A: The RPC0603JT82K0 carries AEC-Q200 automotive qualification. The RC0603JR-0782KL and RC1608J823CS are specified as moisture resistant thick film resistors. Automotive qualification requirements should be confirmed with application specifications and design documentation.

Q: Do these parts have the same moisture sensitivity level?

A: Yes. All three parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes. All parts are in the 0603 (1608 Metric) package with identical physical dimensions (0.063" L x 0.031" W, 1.60mm x 0.80mm) and maximum seated height (0.022" / 0.55mm). PCB footprints and assembly processes remain unchanged.