RP164PJ562CS Equivalent & Substitute Parts

Part Overview

The RP164PJ562CS is a 4-resistor isolated network array manufactured by Samsung Electro-Mechanics, featuring 5.6k Ohm resistance elements with ±5% tolerance in a 1206 (3216 Metric) surface mount package. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity. The part delivers 62.5mW power per element and operates across the temperature range of -55°C to 155°C with a temperature coefficient of ±200ppm/°C.

Substiute Parts

RP164PJ562CS

Samsung Electro-MechanicsIn Stock: 1177RP164PJ562CS Datasheet

Current PartRFQ

RAVF164DJT5K60

Stackpole Electronics IncIn Stock: 875RAVF164DJT5K60 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RP164PJ562CS is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 5.6k Ohm
• Tolerance: ±5%
• Number of resistors: 4
• Circuit type: Isolated
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Package / Case: 1206 (3216 Metric), Convex, Long Side Terminals
• Number of pins: 8
• Mounting type: Surface Mount
• Physical dimensions: 0.126" L x 0.063" W (3.20mm x 1.60mm)

Allowable Variation:

• Power per element may exceed the original specification (62.5mW minimum required)
• Product status may differ (active substitutes acceptable for obsolete main part)
• Packaging format may vary (Tape & Reel acceptable alternative to standard packaging)

The RAVF164DJT5K60 from Stackpole Electronics Inc qualifies as a direct substitute based on full alignment with all mandatory parameters and an increased power rating of 100mW per element.

Parameter Comparison

Engineering Selection Recommendations

The RAVF164DJT5K60 is a qualified substitute for the obsolete RP164PJ562CS based on the following engineering criteria:

Electrical Compatibility: Both parts maintain identical resistance values (5.6k Ohm), tolerance (±5%), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C ~ 155°C). The RAVF164DJT5K60 provides increased power dissipation capability (100mW per element versus 62.5mW), which represents an enhancement rather than a limitation for circuit applications.

Mechanical Compatibility: Package dimensions, pin configuration, and mounting type are identical. Both components use the 1206 (3216 Metric) form factor with convex, long side terminals and 8-pin isolated network architecture. Physical dimensions and seated height are equivalent within manufacturing tolerances.

Compliance and Status: The RAVF164DJT5K60 is an active product with ROHS3 compliance and AEC-Q200 automotive qualification. The original RP164PJ562CS is obsolete, making the Stackpole substitute the appropriate choice for new designs and ongoing procurement.

Packaging Consideration: The substitute is supplied in Tape & Reel format, which is standard for production environments and compatible with automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the RAVF164DJT5K60 directly replace the RP164PJ562CS in existing designs?

A: Yes. The RAVF164DJT5K60 meets all mandatory electrical and mechanical parameters. The increased power rating (100mW versus 62.5mW per element) provides additional thermal margin and does not create compatibility issues. Pin configuration, package dimensions, and electrical characteristics are identical.

Q: What is the significance of the higher power rating on the RAVF164DJT5K60?

A: The 100mW power per element specification on the Stackpole part exceeds the 62.5mW rating of the Samsung part. This represents a design enhancement that allows the component to dissipate more heat without performance degradation. Applications requiring the original 62.5mW specification will operate within the substitute's rated capability.

Q: Are there differences in temperature performance between these parts?

A: No. Both parts share identical temperature coefficient (±200ppm/°C) and operating temperature range (-55°C ~ 155°C). Thermal performance characteristics are equivalent.

Q: What is the significance of AEC-Q200 qualification on the substitute?

A: AEC-Q200 is an automotive industry qualification standard. The RAVF164DJT5K60 carries this certification, indicating compliance with automotive reliability and quality requirements. This qualification is not a limitation for non-automotive applications and represents an additional quality assurance measure.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 1206 (3216 Metric) package with dimensions of 0.126" L x 0.063" W (3.20mm x 1.60mm). Seated height is 0.024" (0.61mm for Samsung, 0.60mm for Stackpole), which is within standard manufacturing tolerance and does not affect PCB layout or assembly compatibility.

Q: What packaging formats are available for the substitute?

A: The RAVF164DJT5K60 is supplied in Tape & Reel (TR) format, which is standard for surface mount component distribution and automated assembly processes.

Q: Are both parts RoHS compliant?

A: Yes. Both the RP164PJ562CS and RAVF164DJT5K60 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.