RP164PJ561CS 560 Ohm 4-Resistor Array Network Equivalent & Substitute Parts

Part Overview

The RP164PJ561CS is a 560 Ohm isolated 4-resistor network array in 1206 (3216 Metric) surface mount package manufactured by Samsung Electro-Mechanics. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement. The part delivers 62.5mW power per element with ±5% tolerance and ±200ppm/°C temperature coefficient, suitable for applications requiring isolated resistor networks in compact form factors.

Substiute Parts

RP164PJ561CS

Samsung Electro-MechanicsIn Stock: 1163RP164PJ561CS Datasheet

Current PartRFQ

742X083561JP

CTS Resistor ProductsIn Stock: 1187742X083561JP Datasheet

DirectRFQ

YC164-JR-07560RL

YAGEOIn Stock: 7072YC164-JR-07560RL Datasheet

DirectRFQ

RAVF164DFT560R

Stackpole Electronics IncIn Stock: 1059RAVF164DFT560R Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RP164PJ561CS is determined by the following critical parameters:

Core Electrical Parameters:

• Resistance value: 560 Ohm (exact match required)
• Tolerance: ±5% or tighter
• Number of resistors: 4 elements
• Circuit type: Isolated configuration
• Temperature coefficient: ±200ppm/°C

Physical & Mechanical Parameters:

• Package: 1206 (3216 Metric) with convex, long side terminals
• Mounting type: Surface Mount
• Pin count: 8 pins
• Operating temperature range: -55°C minimum to 155°C maximum (or compatible subset)

Compliance & Environmental:

• RoHS3 compliance required
• Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts are classified into two categories:

Direct Substitutes (742X083561JP, YC164-JR-07560RL): Parts meeting all core electrical and mechanical parameters with identical or superior specifications. These maintain full functional equivalence.

Upgrade Substitute (RAVF164DFT560R): Part exceeding specifications in tolerance (±1% vs ±5%) and power rating (100mW vs 62.5mW per element) while maintaining all other critical parameters. This part provides enhanced performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications):

742X083561JP and YC164-JR-07560RL are functionally equivalent direct substitutes. Both are active products with ROHS3 compliance and MSL 1 rating. YC164-JR-07560RL maintains the full -55°C to 155°C operating range matching the original part. 742X083561JP operates to 125°C maximum, which may be limiting in high-temperature applications. Both parts carry AEC-Q200 automotive qualification, providing additional reliability assurance for demanding environments.

For Enhanced Performance (Upgrade Path):

RAVF164DFT560R provides superior specifications with ±1% tolerance (versus ±5%) and 100mW power per element (versus 62.5mW). This part is suitable for applications requiring tighter resistance matching or higher power dissipation capability. It maintains the full -55°C to 155°C operating range and carries AEC-Q200 qualification. The upgrade path is appropriate when design margins or performance requirements exceed the original specification.

Procurement Considerations:

All substitute parts are currently in active production with documented inventory availability. Selection should prioritize YC164-JR-07560RL for applications requiring the full temperature range, or RAVF164DFT560R when enhanced tolerance and power ratings provide design benefits.

Frequently Asked Questions (FAQ)

Q: Can 742X083561JP replace RP164PJ561CS in all applications?

A: 742X083561JP is electrically equivalent but operates only to 125°C maximum versus 155°C for the original part. Applications requiring operation above 125°C require YC164-JR-07560RL or RAVF164DFT560R instead.

Q: What is the difference between direct substitutes and the upgrade part?

A: Direct substitutes (742X083561JP, YC164-JR-07560RL) maintain identical electrical specifications. RAVF164DFT560R is an upgrade offering ±1% tolerance and 100mW power per element versus ±5% and 62.5mW. The upgrade part is suitable when tighter tolerance or higher power dissipation is required.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental compliance of the original part.

Q: Do the substitute parts have the same package dimensions?

A: Yes. All substitute parts use the 1206 (3216 Metric) package with convex, long side terminals. Physical dimensions are 0.126" L x 0.063" W (3.20mm x 1.60mm). Height specifications vary slightly: RP164PJ561CS and RAVF164DFT560R are 0.024" (0.60mm) maximum, while 742X083561JP and YC164-JR-07560RL are 0.028" (0.70mm) maximum. These variations are within standard PCB assembly tolerances.

Q: Which substitute part is recommended for automotive applications?

A: YC164-JR-07560RL and RAVF164DFT560R both carry AEC-Q200 automotive qualification. YC164-JR-07560RL provides direct specification matching, while RAVF164DFT560R offers enhanced tolerance and power rating for demanding automotive environments.

Q: What is the temperature coefficient specification and why does it matter?

A: All parts specify ±200ppm/°C temperature coefficient, meaning resistance value changes by up to 200 parts per million for each degree Celsius of temperature change. This specification is identical across all parts and is suitable for standard signal conditioning and biasing applications.